• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.139-146
• /
• 2001

This paper presents a study on heat transfer and residual distortion analysis of laser welded EDFA(Erbium Doped Fiber Amplifier) LD(Laser Diode) Pump using the finite element method. In the production process of LD Pump in light-wave communication system, ferrule and saddle are welded by Nd-YAG laser. These parts experience thermal and mechanical effect during heating and cooling cycle with the laser welding. Thus distortion happens in the laser-welded packaging, and it makes an error in detecting the light signal translate through optical fiber in LD Pump. The amount of final displacement produced by the laser welding is predicted using the finite element method. And the optimal shape of saddle is proposed with the results of numerical analyses to minimize the displacement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.346-349
• /
• 2001

Nowadays the amount of plastic products is increasing in modern industry. Plastic materials are continuously developed to satisfy the mechanical, physical, and chemical properties. The increasing application of plastic parts in automobile and aerospace industries is due to the fact that it can reduce the structural weight and can lessen the environmental contamination. Among many manufacturing technologies for plastic parts, the injection molding process is very attractive because of its low cost and short production time. Through various analyses of resin flow and molding process for the conventional gate and cooling mechanism, a new type of mold was designed which had different gate location and cooling systems. Newly designed ball seat has an excellent performances, i.e. diminished weld-line, residual stress density, higher magnitude less crack propagation and smaller dimensional contractions effect.

• Journal of Plant Biotechnology
• /
• v.3 no.2
• /
• pp.107-112
• /
• 2001

The kinetics of Ti-transformed Salvia miltiorrhiza cell cultures was studied in 250-$m\ell$ shake flasks by using B5 medium with addition of 30 gfL of sucrose. In the cell cultures, the maximum cell mass obtained was 11.5 g DW/L on day 15. The highest amount of phenolic compounds - rosmarinic acid (RA) and lithospermic acid B (LAB) reached 871.3 mg/L (day 15) and 121.3 mg/L (day 13), respectively. The total tanshinone production, i.e., intracellular plus extracellular cryptotanshinone, tanshinone 1, and tanshinone IIA, was 5.3 mg/L on day 13. For the cultivations in 2.4-L stirred bioreactors, the residual sugar level and medium conductivity were a little higher in a small turbine impeller reactor ($T_s$) than those in a large turbine impeller reactor ($T_L$), while a higher cell density was obtained in the $T_L$. For the production of tanshinones and phenolics, better results were obtained in the $T_L$ than in the $T_s$. In the $T_L$, similar or even a little higher production titers of tanshinones and phenolic compounds were achieved compared to those in the flasks. The results suggest that the shake flask results could be successfully scaled up to the $T_L$ reactor. Such a large impeller reactor like $T_L$ may be better than a small impeller one for the large-scale production of the valuable metabolites by the suspension cultures of Ti transformed S.miltiorrhiza cells. This is considered due to the beneficial culture environment in the $T_L$, such as low shear rates as estimated theoretically.

• Journal of Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.140-145
• /
• 1999

Livestock manure is generally beneficial to soil and crop production when appropriate amount is applied, but excessive application may be detrimental to soil and water environments. A proper protocol of livestock waste treatment is required to manage the quality of soil and water. A trickling filter system using rice straw media was employed to treat piggery wastewater from small-scaled livestock farms as an alternative to the currently available methods. Batches of piggery wastewater were treated with this system, and the byproducts of rice straw media and trickling filtrate were applied to the soil with cultivating rye (Secale cereale L.). Objective of this research was to characterize these byproducts for the sustainable soil amendments and rye production. Both the treated straw medium and filtrate were proven to be effective organic fertilizers for rye plant development, with the enhanced but balanced absorption of nutrients. The synergistic effects of filtrate in addition to straw application did not show, but the filtrate appeared to lead to a higher water content of the plant. No specific nutrient deficiency or toxicity symptom was shown due to the salts derived from the byproducts applied. Chemical parameters of the soil quality were significantly improved with the application of straw medium either with or without the filtrate. Judging from parameters relating to the salt accumulations, such as sodium adsorption ratio (SAR), electrical conductivity (EC), exchangeable sodium percentage (ESP), potassium adsorption ratio (KAR), and residual P concentrations, the byproducts from piggery wastewater exhibited no detrimental effects on soil quality within the ranges of treatments used. In addition to the effectiveness of the rice straw trickling filter system for the small-scaled swine farms, both rice straw medium and filtrate could be recycled for the sustainable soil amendment and plant nutrition.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.186-198
• /
• 2022

Heavy metals recovery from Printed Circuit Boards industrial wastewater is crucial because of its cost effectiveness and environmental friendliness. In this study, a copper recovery route combining the sequential processes of acid leaching and LIX 984N extracting with an electrowinning technique from Printed Circuit Boards production's sludge was performed. The used residual sludge was originated from Hanoi Urban Environment One Member Limited Company (URENCO). The extracted solution from the printed circuit boards waste sludge containing a high copper concentration of 19.2 g/L and a small amount of iron (0.575 ppm) was used as electrolyte for the subsequent electrolysis process. By using a simulation model for multi-step current electrolysis, the reasonable current densities for an electrolysis time interval of 30 minutes were determined, to optimize the specific consumption energy for the copper recovery. The mathematical simulation model was built to calculate the important parameters of this process.

• Transactions of Materials Processing
• /
• v.21 no.7
• /
• pp.397-402
• /
• 2012

The flange hub is a main component in an automotive steering system. In general, the flange hub are fabricated by mechanical machining, which is a process where material waste is inevitable. It is well-known that a net-shape cold forging cannot only reduce material waste but can also improve the mechanical strength of the final product. Thus, a forging process design was conducted for production of a flange hub. Significant spring-back occurs around the flange due to its small thickness in conjunction with the residual stresses after forging. In order to achieve the required dimensional accuracy, a process design with appropriate spring-back control is needed. In this study, a modification of the forging die was designed based on FE analysis with the purpose of spring-back compensation. Four kinds of different die designs were evaluated and the optimum design has two times less spring-back than the initial design. The compensation angle of the optimum design is 0.5 degrees. The results have been experimentally confirmed by cold forging of a flange hub and comparing the amount of spring-back between the actual component and the FE analysis.

• Microbiology and Biotechnology Letters
• /
• v.8 no.2
• /
• pp.77-85
• /
• 1980

This experiment was conducted to investigate the conditions for production and the characteristics of pretenses. Aspergillus oryzae KC-15, which is selected as a superior strain for the production of the protease, was used in this study. The results obtained were as follows: 1. The optimum culture time for the production of acid, neutral and alkaline protease on wheat bran medium were about 48, 48 and 72hr, respectively. The protease-produced by the strain were mainly alkaline and neutral one, but the production of acid protease was feeble extremely. 2. The addition of NaH$_2$PO$_4$, Na$_2$HPO$_4$, glucose, rice powder and Na-glutamate respectively to wheat bran media were effective for the production of alkaline and neutral protease, and the addition of (NH$_4$)$_2$HPO$_4$, glucose and rice powder respectively were effective for the production of acid protease. 3. Characteristics of professes(equation omitted) 4. As a heat resistance agent, NaH$_2$PO$_4$was the most effective one. The optimum amount of NaH$_2$PO$_4$was 10mg for alkaline and neutral protease, and 5mg for acid protease. 5. The heat resistance of the Protease by NaH$_2$PO$_4$was not recognized mostly above 6$0^{\circ}C$. 6. After the treatment of enzyme solution with 10mg of NaH$_2$PO$_4$for 30 minutes at 55$^{\circ}C$, the residual activities measured for alkaline, neutral and acid protease were 58, 57 and 55％ respectively.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.77-83
• /
• 2016

The measurement of total fresh weight of plants provides an essential indicator of crop growth for monitoring production. To measure fresh weight without damaging the vegetation, image-based methods have been developed, but they have limitations. In addition, the total plant fresh weight is difficult to measure directly in hydroponic cultivation systems because of the amount of nutrient solution. This study aimed to develop a real-time, precise method to measure the total fresh weight of Romaine lettuce (Lactuca sativa L. cv. Asia Heuk Romaine) with growth stage in a plant factory using a nutrient film technique. The total weight of the channel, amount of residual nutrient solution in the channel, and fresh shoot and root weights of the plants were measured every 7 days after transplanting. The initial weight of the channel during nutrient solution supply (Wi) and its weight change per second just after the nutrient solution supply stopped were also measured. When no more draining occurred, the final weight of the channel (Ws) and the amount of residual nutrient solution in the channel were measured. The time constant (${\tau}$) was calculated by considering the transient values of Wi and Ws. The relationship of Wi, Ws, ${\tau}$, and fresh weight was quantitatively analyzed. After the nutrient solution supply stopped, the change in the channel weight exponentially decreased. The nutrient solution in the channel slowly drained as the root weight in the channel increased. Large differences were observed between the actual fresh weight of the plant and the predicted value because the channel included residual nutrient solution. These differences were difficult to predict with growth stage but a model with the time constant showed the highest accuracy. The real-time fresh weight could be calculated from Wi, Ws, and ${\tau}$ with growth stage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.5
• /
• pp.748-754
• /
• 2018

Objective: The preference evaluation of cattle is an important factor for estimation and improvement of the grazing amounts of newly introduced or bred grasses or cultivars in barn. This study was performed to assess the grazing behavior (the amount of grazing and/or the grazing speed) of cattle as indirect method using newly bred Brachiaria ruziziensis tetraploid strain 'OKI-1'(BR) hay as treatment group and Cloris gayana 'Callide' (CG) hay as control group. It also compared the feasibility of using behavioral differences between two groups as one criteria for evaluating preference by Japanese black cattle in barn. Methods: Three experiments were carried out using 12 growing Japanese Black cattle including 6 males and 6 females. In each experiment, the four Japanese Black cattle (2 males and 2 females) were placed in separated stall and allowed to graze BR and CG in manger that was separated into two portions for about 30 min. The position and behavior of the cattle were recorded, and weighed the residual of each gay at 15 and 30 minutes after experiment start. Results: The BR was superior to CG in chemical composition such as protein, fibers and non-fibrous carbohydrate. The cattle, over all, tended to prefer BR over CG in the first half 15 minutes in terms of the time spent and amount of grazing. Additionally, growing cattle exhibited neophilia for BR bred newly. Conclusion: These findings indicated the current approach could be applied for one of criteria to evaluate the preference of hay by Japanese black cattle under indoor housing environment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.242-250
• /
• 2016

Veterinary antibiotics (VAs) has been used to treat animal disease and to increase animal weight as growth promoter. However, abused usage of VAs can cause production of antibiotic resistance genes (ARGs) in the environment and additionally, residual of VAs in soil can be transferred into crops. Therefore, main objective of this research was to examine bioaccumulation of VAs in sprouts (red cabbage, Brassica Olearacea L. var. Capitata f. rubra and red radish, Raphanus sativus) with hydroponic method. Total of 7 VAs in 2 different classes of VAs (tetracyclcines: tetracycline, oxytetracycline, chlortetracycline, sulfonamides: sulfamethoxazole, sulfamethazine, sulfamethiazole, macrolides: tylosin) were evaluated and experiment was conducted with solid phase extraction (SPE)/high performance liquid chromatography tandem mass spectrometry (HPLC/MS/MS). Initial spiked concentration of 7 VAs was $5mg\;L^{-1}$ and cultivation period was 8 days. Result showed that growth of sprouts was inhibited about 23-27% when VAs was introduced. Amount of bioaccumulated VAs was also differed depending on class of VAs. The highest amount of bioaccmulated VAs was tetracycline and sulfamethoxazole in each class with a concentration of 4.05, $7.73mg\;kg^{-1}$ respectively. Calculated transfer ratio of VAs into crops was also ranged 0.38-54.27%. Overall, bioaccumulation of VAs in crops can be varied depending on crop species and class of VAs. However, further research should be conducted to verify bioaccumulation of VAs in crops in the soil environment.