• 한국항해항만학회지
• /
• 제35권9호
• /
• pp.717-720
• /
• 2011

In this paper, we designed and fabricated the Electromagnetic(EM) wave absorber for an Electronic Toll Collection(ETC or Hi-pass) system by using Amorphous metal powder and CPE. The material properties and the absorption properties of the samples containing 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% of Amorphous. Moreover, the EM wave absorption abilities were simulated for the different thicknesses of the EM absorbers by adopting the measured permittivity and permeability, and then the EM wave absorber was fabricated based on the simulated design values. As a result, the EM wave absorber with the composition of Amorphous metal powder : CPE = 50 : 50 wt.% with the thickness of 2.6 mm has excellent absorption ability more than 40 dB at 5.8 GHz.

• 한국항해항만학회지
• /
• 제34권1호
• /
• pp.27-31
• /
• 2010

본 논문에서는 항만 물류 시스템에서 사용하는 중심주파수 433 MHz에서 동작하는 전파흡수체를 설계 개발하였다. 먼저 자성손실 재료인 AMP (Amorphous Metal Powder)와 지지재인 CPE (Chlorinated Polyethylene)를 이용하여 AMP:CPE의 조성비가 각각 80:20 wt.%와 85:15 wt.%의 전파흡수체 샘플을 제작한 후, 입력임피던스를 측정하여 샘플의 재료정수를 계산하고 시뮬레이션에 의하여 최적의 전파흡수체를 설계하였다. 그 결과 AMP:CPE=85:15 wt.% 의 조성비에 두께 5.5 mm일 때 최적의 전파흡수특성이 얻어짐을 확인하고, 실제 제작하여 측정한 결과 433 MHz 주파수대역에서 17.5 dB의 흡수능이 얻어졌으며, 이는 본 연구에서 목표로 하는 15 dB 보다 우수한 결과이다.

• 한국항해항만학회지
• /
• 제35권7호
• /
• pp.569-573
• /
• 2011

In this paper, we developed a Smart Heat Radiating Sheet(SHRS) having the absorption ability of more than 15 dB, and thermal conduction rate more than 20 W/mk for port logistics RFID(Radio Frequency IDentification) system by using AMP(Amorphous Metal Powder) and shielding sheet. Firstly, the EM(Electro_Magnetic) wave absorber samples were fabricated by using AMP and CPE (Chlorinated Polyethylene) with different composition ratios of 80 : 20 wt.% and 85 : 15 wt.%, respectively. Secondly, we fabricated the Smart Heat Radiating Sheet using the shielding sheet to attach EM Wave Absorber. As a result, the Smart Heat Radiating Sheet with absorption ability of 16 dB at 433 MHz and thermal conduction rate is 24 W/mk has been developed with the composition ratio of Amorphous Metal Powder : CPE = 85 : 15 wt.% and thickness of 5.5 mm.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.288-293
• /
• 2003

Mechanical alloying (MA) by high energy ball mill of Pure chromium Powders was carried out under the nitrogen gas atmosphere. Cr-N amorphous alloy powders have been produced through the solid-gas reaction subjected to MA. The atomic structure during amorphization process was observed by X-ray and neutron diffractions. An advantage of the neutron diffraction technique allows us to observe the local atomic structure surrounding a nitrogen atom. The coordination number of metal atoms around a N atom turns out to be 5.5 atoms. This implies that a nitrogen atom is located at both of centers of the tetrahedron and octahedron formed by metal atoms to stabilize an amorphous Cr-N structure. Also, we have revealed that a Cr-N amorphous alloy may produced from a mixture of pure Cr and Cr nitrides powders by solid-solid reaction during mechanical alloying.

• 한국분말재료학회지
• /
• 제15권4호
• /
• pp.285-291
• /
• 2008

Fe based ($Fe_{68.2}C_{5.9}Si_{3.5}B_{6.7}P_{9.6}Cr_{2.1}Mo_{2.0}Al_{2.0}$) amorphous powder were produced by a gas atomization process, and then ductile Cu powder fabricated by the electric explosion of wire(EEW) were mixed in the liquid (methanol) consecutively. The Fe-based amorphous - nanometallic Cu composite powders were compacted by a spark plasma sintering (SPS) processes. The nano-sized Cu powders of ${\sim}\;nm$200 produced by EEW in the methanol were mixed and well coated with the atomized Fe amorphous powders through the simple drying process on the hot plate. The relative density of the compacts obtained by the SPS showed over 98% and its hardness was also found to reach over 1100 Hv.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.670-673
• /
• 2002

Powder synthesis using the alkoxy precursor technique exhibits processing flexibility not available in traditional high temperature solid-state reaction. With proper process control, impurities can be reduced to very low levels. The major distinction of the present work lies in the method of accomplishing the hydrolysis reaction. In the present case, water is not added to the system. Instead the metal alkoxide/alcohol solution is heated to a temperature at which water is formed through dehydration of the alcohol solvent, causing precipitation of the corresponding metal oxide (hydroxide). The present method provides a means of producing amorphous alumina.

• 한국전자파학회논문지
• /
• 제20권3호
• /
• pp.222-229
• /
• 2009

본 논문에서는 RFID Tag가 금속판에 접근할 때 통신 거리가 감소되는 RFID 시스템의 통신 거리 증대를 위한 전파흡수체를 개발하였다. 먼저 자성 손실 재료인 Amorphous 금속 분말과 지지재인 CPE(Chlorinated Polyethylene)를 이용하여 조성비별 전파흡수체 샘플을 제작하고, 이 전파흡수체 샘플로부터 구한 재료정수를 이용하여 전파흡수능이 서로 다른 전파흡수체를 각각 설계 제작하였다. 이와 더불어 개발된 전파흡수체를 적용하여 금속에 의해 특성이 열화되는 RFID 태그 안테나의 특성 개선 효과 및 실제 RFID 시스템의 통신 거리 변화를 실험적으로 검토하였다. 그 결과 조성비가 Amorphous metal powder:CPE=80:20 wt.%이고, 두께가 4 mm인 전파흡수체가 금속판으로 인해 통신 거리가 0.8 m인 실제 RFID 시스템의 통신 거리를 5.2 m까지 증대시킴을 확인하였다.

• 한국분말재료학회지
• /
• 제28권4호
• /
• pp.293-300
• /
• 2021

We investigate the effect of phosphorous content on the microstructure and magnetic properties of Fe_83.2Si_5.33-0.33xB_10.67-0.67xP_xCu_0.8 (x = 1-4 at.%) nanocrystalline soft magnetic alloys. The simultaneous addition of Cu and P to nanocrystalline alloys reportedly decreases the nanocrystalline size significantly, to 10-20 nm. In the P-containing nanocrystalline alloy, P atoms are distributed in an amorphous residual matrix, which suppresses grain growth, increases permeability, and decreases coercivity. In this study, nanocrystalline ribbons with a composition of Fe_83.2Si_5.33-0.33xB_10.67-0.67xP_xCu_0.8 (x = 1-4 at.%) are fabricated by rapid quenching melt-spinning and thermal annealing. It is demonstrated that the addition of a small amount of P to the alloy improves the glass-forming ability and increases the resistance to undesirable Fe_x(B,P) crystallization. Among the alloys investigated in this work, an Fe_83.2Si₅B₁₀P₁Cu_0.8 nanocrystalline ribbon annealed at 460℃ exhibits excellent soft-magnetic properties including low coercivity, low core loss, and high saturation magnetization. The uniform nanocrystallization of the Fe_83.2Si₅B₁₀P₁Cu_0.8 alloy is confirmed by high-resolution transmission electron microscopy analysis.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.424-428
• /
• 2012

공기흡입형 추진기관은 운용의 단순함, 저비용, 저장의 용이성 등의 장점으로 각광받고 있는 추진 기관이다. 본 논문에서는 Boron을 이용한 공기흡입형 추진기관의 가스발생기에 사용될 추진제 연구를 수행하였다. 이를 위하여, Amorphous Boron Powder를 적용한 추진제에 다양한 첨가제를 사용하여 연소특성을 파악하였고, Boron bead를 제조하여 추진제에 적용하여 Amorphous Boron Power를 적용한 추진제와의 차이점을 비교 분석 하였다.

• 한국전자파학회논문지
• /
• 제20권6호
• /
• pp.562-569
• /
• 2009

최근 DSRC, 협대역 통신 방식을 이용하여 고속도로 톨게이트에 Hi-pass(차량의 무정차 자동 요금 징수)를 운용하고 있지만, 전파의 다중 반사로 인한 전파 간섭이 발생하여 시스템의 오류 및 사고가 발생하고 있다. 이러한 문제들은 전파 흡수체를 사용하여 해결할 수 있다. 본 논문은 전파 흡수 재료인 비정질 재료와 지지재인 CPE를 배합하여 최적의 조성비를 찾고 DSRC용 전파 흡수체를 개발하는 연구를 하였다. 그 결과, 조성비 비정질 재료 :CPE=45:55 wt.%, 두께 2.65 mm인 전파 흡수체가 5.8 GHz에서 40 dB 이상의 흡수능이 얻어지도록 개발하였다.