• Journal of Microbiology and Biotechnology
• /
• 제9권6호
• /
• pp.726-731
• /
• 1999

It was discovered that ammonium phosphate in the medium played an important role in both growing mycelium and producing exopolysaccharides (EPS) from G. lucidum. In lower concentration levels of ammonium phosphate (0-3 g/l), an improved mycelial growth was observed by maintaining more filamentous morphology than in high concentrations (5-11 g/l). In addition, it was confirmed by comparing the factual dimension and frequency of the area regarding the mycelial pellets. This must be attributed to limitations of nutrient transfer by maintaining filamentous mycelium during the cultivation in a low ammonium phosphate containing medium. On the other hand, the best EPS production was observed in medium with the absence or low concentration of ammonium phosphate. The shear stress of the culture broth was greatly affected by the shear rate, as compared with that of the culture broth with high ammonium phosphate concentration. The rheological characteristics of the fermentation broth and filtrate worked well according to the Herschel-Bulkley model. It was also found that the morphological changes of the mycelium resulting from the ammonium phosphate concentration directly affected the rheological characteristics of the system and resulted in reversely affecting the EPS production levels. Based on these results, it can be concluded that delicate regulation of the ammonium phosphate concentration in the culture media should be provided in order to obtain optimal mycelial growth and/or EPS production.

• 공업화학
• /
• 제18권3호
• /
• pp.251-254
• /
• 2007

실온에서 베니어에 ammonium chloride, ammonium sulfate, monoammonium phosphate, 그리고 diammonium phosphate와 같은 암모늄염으로 도포하고, 도포된 베니어의 난연성을 조사하였다. 암모늄염으로 도포된 베니어판은 미처리된 순수 베니어판에 비하여 $CO/CO_2$비를 증가시켰다. 이것은 정도에 따라 독성에 영향을 미치는 것으로 생각된다. 암모늄염이 베니어의 난연제로 사용되었을 때, 도포된 암모늄염은 베니어의 난연성을 향상시켰다. 또한 ammonium sulfate와 ammonium chloride로 도포된 베니어는 미처리된 순수 베니어에 비해 양쪽 모두 낮은 총연기방출율과 낮은 총연기량을 나타내었다.

• 공업화학
• /
• 제18권2호
• /
• pp.194-198
• /
• 2007

실온에서 베니어에 ammonium chloride, ammonium sulfate, monoammonium phosphate, 그리고 diammonium phosphate와 같은 암모늄염으로 도포하고, 도포된 베니어의 물리적 성질과 가연성을 조사하였다. 암모늄염로 처리된 베니어의 가연성을 평가하기 위해서, ISO 5660-1 표준에 따른 콘칼로리미터를 이용하여 베니어의 열방출율을 측정하였다. 암모늄염으로 도포된 베니어판은 미처리된 순수 베니어판에 비하여 가연성을 감소시켰다. 도포된 베니어의 flashover 가능성은 R. V. Petrella에 의한 분류 방법에 따라서 착화시간과 최대열방출율을 이용하여 시험하였다. 비중측정 결과 ammonium sulfate로 처리한 베니어의 비중만 미처리 베니어보다 더 높았다. 또한 암모늄염으로 도포된 베니어는 무처리된 순수 베니어보다 낮은 평형함수율을 보였다.

• 한국세라믹학회지
• /
• 제18권3호
• /
• pp.192-200
• /
• 1981

This study deals with the low temperature ($25^{\circ}C$-$600^{\circ}C$) properties of Kaolin-Phosphate-water systems. Phosphoric acid, mono aluminum phosphate, mono ammonium phosphate, the mixture of phosphoric acid and mono aluminum phosphate, and the mixture of phosphoric acid and mono ammonium phosphate were used to characterize the M.O.R. of the systems with to quantity of phosphates, curing time, and firing temperature. Firing shrinkage, viscosity, surface tension, DTA, TGA, and X-ray diffraction patterns were also measured in order to investigated the factors of strengthening. The results of this study were summarized as follows: 1. The M.O.R. of kaolin-phosphate systems were stronger than that of Kaolin-water system at room temperature or low temperature($25^{\circ}C$-$600^{\circ}C$). Though it was increased according to the longer curing time, the higher temperature, and the more addition of phosphate, the M.O.R. were decreased in the case of 10 wt% phosphate addition in the system of phosphoric acid, mono aluminum phosphate and phosphoric acid-mono aluminum phosphate. 2. When the concentration of Phosphate was at 4 wt%, the M.O.R. of specimen cured at $25^{\circ}C$ and added to the phosphoric acid was strongest among the specimens in added to the others phosphates. Whereas, when the concentration of phosphate was above 6wt%, the M.O.R. of specimen cured at $25^{\circ}C$ and added to the phosphoric acid mono ammonium phosphate system cured at $25^{\circ}C$ was the strongest. 3. The M.O.R. of the specimen heated, in the temperature range of 15$0^{\circ}C$-1$600^{\circ}C$, and added to the mixture of phosphoric acid-mono aluminum phosphate system or phosphoric acid-mono ammonium phosphate system was stronger than that of specimen added to Phosphoric acid, mono-aluminum Phosphate or mono-ammonium phosphate alone. 4. The bonding force of phosphate binders was more closely related to surface tension than viscosity and it tended to be inversely proportional to surface tension. The bonding force after heating treatment seemed to be caused by the change of structure of phosphate according to heating.

• 한국세라믹학회지
• /
• 제18권4호
• /
• pp.229-236
• /
• 1981

This study deals with the high temperature (600-135$0^{\circ}C$) properties of Kaolin-Phosphate-Water systems. Phosphoric acid, mono aluminum phosphate, mono ammonium phosphate, the mixture of phosphoric acid and mono aluminum phosphate, and the mixture of phosphoric acid and mono ammonium phosphate were used to characterize the M.O.R of the systems with to quantity of phosphates and firing temperature. Firing shrinkage, creeptest, DTA, TGA, and X-ray diffraction patterns were also measured in order to investigate the factors of strengthening. The resules of the experiments are as follows: 1. Linear shrinkage of kaolin-phosphate systems become larger as the firing temperature rise, and generally in the firing temperature of $600^{\circ}C$ and 100$0^{\circ}C$ the test pieces with phosphate binder show larger then Kaolin-Water system in linear shrinkage and reversed trends were found at 120$0^{\circ}C$ and 135$0^{\circ}C$. 2. Cold M.O.R. of kaolin-phosphate systems show higher trends in strength as the firing temperature rise. Comparing M.O.R. of test pieces after firing at 135$0^{\circ}C$, the mixture of phosphoric acid-mono aluminum phosphate, and phosphoric acid mono ammonium phosphate systems show higher strength than kaolin-mono aluminum phosphate system which widely used, and it shows highest strength when the mole ratio of phosphoric acid and mono ammonium phosphate is 1:1 among the test pieces of kaolin-phosphate systems. 3. The refractoriness of kaolin-phosphate systems are more deteriorated than Kaolin-Water system, and generally, the more addition of phosphate, the lower the refractoriness, however in the range of 4-8% phosphate addition, the difference of the fusion temperature is about 7$0^{\circ}C$. 4. The test pieces of T1 and T2 in creep test were same or even higher than kaolin-water system when 6% of phosphoric acid-mono ammonium phosphate was added to kaolin. 5. In case where the phosphoric acid-mono ammonium phosphate was added to kaolin in mole ratio 1:1 the cold M.O.R., after firing at 135$0^{\circ}C$, refractoriness and $T_2$ in creep test show better results than kaolin-mono-aluminum phosphate system which is widely used. 6. Phosphoric acid and mono ammonium phosphate react with kaolin in temperature over 100$0^{\circ}C$, and it forms aluminum phosphate.

• 한국토양비료학회지
• /
• 제43권6호
• /
• pp.975-977
• /
• 2010

Ammonium nitrogen is volatilized as ammonia at high pH soil. This study was conducted to observe an injury cause of egg plant grown in a high pH rockwool amended with ammonium phosphate. The etiolation symptom (yellowing) was appeared on veins of a leaf but not in healthy root when nutrient solution containing ammonium phosphate in addition to essential elements was applied in a top soil of which pH was 7.8. However, the same symptom did not appeared in the egg plant from the top soil in which the nutrition solution containing potassium phosphate instead of ammonium phosphate was applied. pHs were similar between these two different solutions. This revealed that the injury was caused by ammonia gas.

• 공업화학
• /
• 제21권6호
• /
• pp.627-631
• /
• 2010

본 연구에서는 암모늄염 처리에 의하여 리기다 소나무를 바탕으로한 재료의 난연성을 시험하였다. 실온에서 3종류의 암모늄염 즉, ammonium sulfate, monoammonium phosphate, 그리고 diammonium phosphate의 20 wt% 수용액에 각각 리기다 소나무를 함침시켜 건조시킨 후 콘칼로리미터(ISO 5660-1)를 이용하여 그들의 연소성을 조사하였다. 암모늄염으로 처리한 시험편들은 미처리된 시험편에 비하여 연소억제성을 향상시켰다. 그러나 CO의 발생량은 증가하여 정도에 따라 독성 영향을 미치는 것으로 보여졌다. 또한 미처리된 순수 시험편에 비해 총연기방출율과 총연기량이 모두 낮은 값을 나타내었다. 처리된 시험편 중 diammonium phosphate로 처리된 것이 가장 연소억제 효과가 강한 것으로 판단되었다.

• 한국환경농학회지
• /
• 제22권3호
• /
• pp.197-202
• /
• 2003

Phosphorus is one of the major plant growth limiting nutrients, despite being abundant in soils in both inorganic and organic forms. Phosphobioinoculants in the form of microorganisms can help in increasing the availability of accumulated phosphates for plant growth by solubilization. Penicillium oxalicum CBPSTsa, isolated from paddy rhizosphere, was studied for its phosphate solubilization. The influence of various carbon sources like glucose, sucrose, mannitol and sorbitol and nitrogen sources like arginine, sodium nitrate, potassium nitrate, ammonium chloride and ammonium sulphate were evaluated using liquid media with tricalcium phosphate (Ca-P), ferric phosphate (Fe-P) and aluminium phosphate (Al-P). Maximum soluble phosphate of 824 mg/L was found in the amendment of sucrose-sodium nitrate from 5 g/L of Ca-P. Mannitol, sorbitol, and ariginine were poor in phosphate solubilization. While sucrose was better carbon source in solubilization of Ca-P and Al-P, glucose fared better in solubilization of Fe-P. Though all the nitrogen sources enhanced P solubilization, nitrates were better than ammonium In the amendments of ammonium chloride and ammonium sulphate, higher uptake of available phosphates by the fungus was found, and this resulted in depletion of available P in Fe-P amendment Phosphate solubilization was accompanied by acidification of the media, and the highest pH decrease was observed in glucose amendment Among the nitrogen sources, ammonium chloride favored greater pH decrease.

• 한국균학회지
• /
• 제29권2호
• /
• pp.91-98
• /
• 2001

버섯의 액체배양에 의한 균사체 및 세포외 다당 발효의 안정성과 생산성 증가를 도모하기 위하여, 영지(Ganoderma lucidum ASI 7004)의 액체배양 중, 배지조성($0{\sim}11\;g/l$의 ammonium)을 달리하여 균사체 형태 및 분화의 경시변화를 영상분석 시스템을 이용하여 분석하였다. 배지 조성 및 배양 조건에 따른 균사체 형태의 배양경시변화를 영상분석한 결과, non-branched long filamentous mycelium, non-branched short mycelium, branched long filamentous mycelium, branched short mycelium, entangled mycelium 및 각종 clump의 필라멘트 형태와, smooth pellet, rough pellet 및 hollow rough pellet의 펠렛 형태 등, 다양한 형태를 관찰할 수 있었다. Ammonium ion이 낮은 경우에는 필라멘트 형태의 균사 생육이 주인 반면, 높은 농도로 갈수록 펠렛 형태의 균사 생육이 주로 관찰되었다. 이러한 형태의 변화를 수치화 하는 수단으로 fractal 차원을 이용하여 형태를 분류한 결과, 11 g/l의 ammonium phosphate 농도에서 주로 나타나는 균사형태의 fractal 차원을 이용하여 형태를 분류한 결과, 11 g/l의 ammonium phosphate 농도에서 주로 나타나는 균사형태의 fractal 차원은 1.05 이었으나(펠렛형), ammonium phosphate의 결핍 시에 주로 나타나는 균사 형태의 fractal 차원은 1.3이었다(필라멘트형). 또 필라멘트형 및 펠렛형 균사체가 공존할 때의 fractal 차원은 1.16으로, 이들의 중간 값을 나타내었다. 따라서, fractal 차원은 균사 형태의 변화를 측정하는 지표 값으로 매우 유용할 것으로 생각되었다. 또 원형도는 펠렛형 균사체의 표면에서 균사 생육 정도를 판정하는데 유용한 것으로 나타났다.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.399-406
• /
• 2010

This study was performed to test the flame retardancy of zelkova sarrata-based materials by the treatment of ammonium salts. Zelkova sarrata plate was soaked by the treatment with three 20 wt% ammonium salt solutions consisting ammonium chloride (AMSL), monoammonium phosphate (MAPP), and diammonium phosphate (DAPP), respectively, at the room temperature. After the drying specimen treated with chemicals, combustion properties were examined by the cone calorimeter (ISO 5660-1). When the ammonium salts were used as the retardant for zelkova sarrata, the flame retardancy improved due to the treated ammonium salts in the virgin zelkova sarrata. However the specimen shows increasing CO over virgin zelkova sarrata and It is supposed that toxicities depend on extents. Also, the specimen with ammonium salts showed the higher total smoke release (TSR) than that of virgin plate. Of specimens treated with ammonium salts the ammonium chloride handled the test side was considered a improved inhibitory effect of combustion.