• Journal of Microbiology
• /
• 제41권1호
• /
• pp.34-40
• /
• 2003

Aspergillus nidulans, a homothalic ascomycete, has a complete sexual reproductive cycle as well as an asexual one. Both sexual and asexual development are known to be genetically programmed, but are also strongly affected by environmental factors including nutrients, light, temperature and osmolarity. We have examined these factors to define favored conditions for fruiting body (cleistothecium) formation. In general, fruiting body formation was enhanced where carbon and nitrogen sources were sufficient. Limitation of C-source caused predominant asexual development while inhibiting sexual development. When higher concentrations of glucose were supplied, more cleistothecia were formed. Other carbon sources including lactose, galactose and glycerol made the fungus develop cleistothecia very well, whereas acetate caused asexual sporulation only. Organic nitrogen sources like casein hydrolysate and glycine, and an increase in nitrate or ammonium concentration also enhanced sexual development. In addition to nutrient effects, low levels of aerobic respiration, caused either by platesealing or treatment with various chemicals, favored sexual development. Carbon limitation, light exposure and a high concentration of salts promoted asexual development preferentially, suggesting that stress conditions may drive the cell to develop asexual sporulation while comfortable and wellnourished growth conditions favored sexual development.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제6권2호
• /
• pp.202-208
• /
• 1996

The purposes of this study are the identification and determination of metabolites in the isolated rat liver perfusate of carbon disulfide by two-dimentional thin-layer chromatography and high performance liquid chromatography for understanding the metabolism of carbon disulfide. 2-Thio-thiazolidine-4-carboxylic acid(TTCA) was synthesized by the reaction of carbon disulfide and cysteine, and confirmed by two-dimentional thin-layer chromatography, high performance liquid chromatography, UV spectroscopy, and IR spectroscopy. The absorbance of UV detector for the simultaneous determination of TTCA and thiocarbamide was 254 nm although their maximum spectra were 273 nm and 237 nm, respectively. Two kinds of the developing solvent in the two-dimentional thin-layer chromatography were 2-butanol : 80% HCOOH : $H_2O$ (7 : 2 : 1) as the first developing solvent and 2-propanol : $H_2O$ (4 : 1) as the second developing solvent. After perfusion of carbon disulfide ($8274.23{\mu}mol$), the amount of TTCA and thiocabamide of the perfusate(100 ul) were $12.02-16.4{\mu}mol$ and $5.25-8.15{\mu}g$, respectively. The mean amount of them were $14.08{\mu}mol$ and $6.41{\mu}mol$ respectively, and the former was 2.20 times greater than the latter. For conforming the mechanism of formations of TTCA and thiocarbamide in vivo, we have to clarify whether the reactions between carbon disulfide and ammonia, ammonium salts, amides, cysteine, cystine, or proteins will be formed in vitro.

• Bulletin of the Korean Chemical Society
• /
• 제17권1호
• /
• pp.46-50
• /
• 1996

Monoanionic nickel(Ⅲ) complexes, [Ni(dmbit)2]1- and [Ni(dmbbip)2]1- where dmbit2- and dmbbip2- denote 2-thiobenzo[d]-1,3-dithiole-5,6-dithiolate and 1,2-bis(isopropylthio)benzen-4,5-dithiolate, respectively, have been synthesized by the iodine oxidation of dianionic complexes. In the scanning electron microscopic(SEM) images, these complexes show the well-grown two-dimensional layered structures which are clearly comparable to the dianionic ones with three-dimensional structures. Magnetic susceptibilities of nickel(Ⅲ)complexes are fitted well with the two-dimensional Heisenberg antiferromagnet model of S=1/2 system resulting in the spin-exchange parameters (|J|/k) of 11.4 K and 0.45 K, respectively. The weaker magnetic interaction in [Ni(dmbbip)2]1- is resulted from the bulky isopropyl groups on the periphery of dmbbip ligand. EPR measurements for [Ni(dmbit)2]1- give the signal with axial symmetry and the anisotropic g-values for low-spin nickel(Ⅲ) (g//=2.158, g =2.030,gav=2.074 at 300 K; g//=2.162, g =2.038, gav=2.080 at 77 K). It is therefore concluded that nickel(Ⅱ) is oxidized to nickel(Ⅲ), rather than dmbit2- and dmbbip2- ligands are, by the iodine oxidation. The paramagnetic Ni(Ⅲ) would be located in the axial symmetry(D4h) with the electronic configuration of (dxz2dyz2dz22dxy1dx2-y20).

• Journal of Korean Society on Water Environment
• /
• 제35권5호
• /
• pp.418-424
• /
• 2019

In this study, $TiO_2$ nanotubes with different morphologies were prepared in the electrolyte consisting of ethylene glycol, ammonium fluoride($NH_4F$), and deionized water($H_2O$) by controlling the voltage and time in the anodization method. Thicknesses and pore sizes of these $TiO_2$ nanotubes were measured to interpret the relationship between anodization conditions and $TiO_2$ nanotube morphologies. Element contents in the $TiO_2$ nanotubes were detected for further analysis of $TiO_2$ nanotube characteristics. Photoelectrolyticdecolorization efficiencies of the $TiO_2$ nanotube plates with various morphologies were tested to clarify the morphology that a highly active $TiO_2$ nanotube plate should have. Influences of applied voltage in photoelectrolysis processes and sodium sulfate($Na_2SO_4$) concentration in wastewater on the decolorization efficiency were also studied. To save the equipment investment cost in photoelectrolysis methods, a two-photoelectrode system that uses the $TiO_2$ nanotube plates as photoanode and photocathode instead of adding other counter electrodes was studied. Compared with single-photoelectrode system that uses the $TiO_2$ nanotube plate as photoanode and titanium plate as cathode on the view of the treatment of dye wastewater containing different amounts of salt. As a result, a considerably suitable voltage was strictly needed for enhancing the photoelectrolyticdecolorization effect of the two-photoelectrode system but if salts exist in wastewater, an excellent increase in the decolorization efficiency can be obtained.

• Applied Chemistry for Engineering
• /
• 제17권2호
• /
• pp.177-182
• /
• 2006

In this work, we have prepared organophilic MMT having thermal stability by ion exchange reaction of various aromatic ammonium salts with MMT containing sodium ion. The organic modifiers having alkyl side chains and amine functional group were successfully synthesized by effectively introducing the surfaces of MMT via ion exchange reaction to form organophilic MMTs with a view to improve the reactivity and thermal stability. The WAXD patterns of organophilic MMT showed the more increased gallery spacing by $3.3{\AA}$ than that of the pristine MMT and also the onset of initial decomposition of organophilic MMT was $275^{\circ}C$ as determined by a thermogravimetric analysis. The polyimide (PI) nanocomposite films based on poly(amic acid) and organophilic MMT were prepared by a solution blending followed by cyclodehydration reaction. We have investigated the dispersity of organophilic MMTs in PI matrix by using WAXD and the effect of the organophilic MMT content on the mechanical properties of PI nanocomposite films was studied.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제14권3호
• /
• pp.655-668
• /
• 1994

Conventional deodorization filters using soil and compost reach the capacity limitation of deodorization in short period, because its removal mechanism primarily depends on adsorption. Therefore, in this study the experiment was performed on the removal of ammonia which is a strong inorganic malodor, frequently emitted from night soil treatment plants and sewage treatment plants, by seeding activated sludges on the bio-peat containing higher organic contents, water conservation capacity, permeability and lower pressure drop. As a result, in raw peat filter natural ammonia outlet was observed in consequence of pH increase resulted from ammonia ionizing in liquid phase. Ammonia removal mechanism primarily depended on the adsorption onto the anion colloidal substances in peat. In peat bio-filter, theoretical ammonium salts ratio was higher than that of raw peat, resulted from slight pH increase by microorganism activity, however, the experimetal value of ammonia-nitrogen accumulated in bio-peat was lower than that of raw peat because of nitrification by nitrifying bacteria. In the initial reaction period, adsorption was predominant in the ammonia removal mechanism, but nitrification was conspicuous after the middle period. Mass balance of nitrogen was established using experimental data of input $NH_3$ loading, output $NH_3$ loading, $NH_4{^+}$-N, $NO_x$-N, and Org-N. The critical time of unsteady state, which is the maximum activating point of microorganism in bio-filter, was determined using experimental data, and the ammonia adsorption curve was computed using regression analysis. On the basis of the results obtained by above analysis, the delay days for the saturation of adsoption capacity in peat bio-filter was calculated.

• Journal of the Korean Chemical Society
• /
• 제17권3호
• /
• pp.224-228
• /
• 1973

In the fermentation for preparation of petroprotein by Rhodotorula sp. in $C_{12}{\sim}C_{14}$n-alkane mixture it was investigated how the effects due to the difference of chemical form of the nitrogen sources are, that is, how the inorganic nitrogen sources such as nitrates and ammonium salts and organic nitrogen source such as urea effect on the view of fermentation time and yield and how the ratios of nitrogen to carbon with $NaNo_3$ effect. Then following results were obtained: the time required to maximum growth, when $NaNo_3$ or $(NH_4)_2SO_4$ was used as nitrogen source, was 40 hrs. and 45 hrs., respectively, but when urea was used, it was 66 hrs. much longer than above nitrogen sources. On the view of yield, however, in use of the both inorganic sources, when the yield is represented as consumption of 0.1 N-NaOH, it was 0.36 and 0.38 ml, respectively, but, in the case of urea, it amounted to 0.78 ml. In the effect of the ratios of nitrogen to carbon in medium, when n-alkane mixture was added in 1 % (vol.) and N/C with $NaNo_3$ was 0.2 the best results were obtained and generally the higher the value of the ratio the better growth effects were shown.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제20권2호
• /
• pp.350-361
• /
• 1996

The objectives of this study mere 1) to investigate whether the different nonwoven fabric types influenced on the objective and subjective wear performances of the experimental pesticide protective pants, 2) to detect whether the different finishes treated to the nonwoven fabrics influenced on the objective and subjective wear performances of the experimental pants, and 3) to detect the relationships between objective wear performances and subjective wear sensation. Three types of nonwoven fabrics (T (Tyvek$\textregistered$), 5 (Sontara$\textregistered$) and K (Kimlon$\textregistered$)) were used as test specimens. By pad-dry.cure method, each of the specimen was treated with fluorocarbon compound for water-oil repellent finish (Tw, Sw, Kw). And each of specimen was treated with organic silicon quarternary ammonium salts and then treated with fluorocabon compound for dual functional finish (76, 50, Kd). Using the three water-oil repellent finished fabrics and the three dual functional finished fabrics, six experimental protective pants (Cl (Tw), C2 (Sw), C3 (Kw), C4 (76), C5 (56), C6 (Kd)) were made according to the same pattern suggested by the Rual Guidance Office. The wear trials of experimental pesticide protective pants were performed in a conditioned vinyl plastic hothouse ($30\pm1^{\circ}C$, $70\pm5%$R.H., 0.25m/sec air velocity). The measurements of skin temperature, microclimate temperature and humidity on the subjects were obtained by the themohygromenter. The subjective wear sensations were measured using previously developed thermal, humidity and overall comfort scales. The results obtained from this study were as follows: 1) There were siginificant differences among nonwoven fabric types on the objective and subjective wear performances, therefore, the skin temperature, microclimate temperature and humidity of subjects who wore the experimental pants made with Sontara were siginificantly lower than those who wore the others. And, the experimental pants made with Sontara were assessed as more comfortable than the others in terms of the subjective thermal, humidity and overall wear sensations. 2) There were no significant differences between two finish types on the objective and subjective wear Performances. 3) The microclimate humidity on the thigh was highly correlated with the overall subjective comfort sensations and the next highly correlated one was the mean skin temperature. That is, the higher the microclimate humidity and the mean skin temperature, the higher the overall subjective comfort sensation ratings which mean the overall subjective sensation was very uncomfortable.

• Clean Technology
• /
• 제18권3호
• /
• pp.325-328
• /
• 2012

The condensation reaction of 9,9'-bis(4-hydroxyphenyl)fluorene with epichlorohydrin to prepare 9,9'-bis[4(glycidyloxy) phenyl]fluorene (2), an important building block for fluorene-containing epoxy polymers, has been studied. The reaction is found to be quite sensitive to several experimental conditions such as reaction temperature and time, added amount of epichlorohydrin, the presence of catalysts and the use of co-solvent. Several conditions for obtaining the best yield in the reaction are: the reaction temperature is below 373 K and the reaction time is shorter than 1.5 h, and the ammonium salts act as a catalyst. Also, the use of ternary solvent (toluene, DMSO, water) has been proved to be crucial to maintain the reaction temperature and for an easy purification. Thus, the reaction proceeds in an environment-friendly manner where the use of reactants and the production of chemical wastes is minimized.

• Journal of Environmental Science International
• /
• 제27권7호
• /
• pp.597-610
• /
• 2018

This study observed particulate matter ($PM_{2.5}$ and $PM_{10}$) in the downtown area of Jeju City, South Korea, to understand the chemical composition of particulates based on an analysis of the water-soluble ionic species contained in the particles. The mass fraction of the ionic species in the sampled $PM_{10}$ and $PM_{2.5}$ was 44.3% and 42.2%, respectively. In contrast, in Daegu City and Suwon City, the mass fraction of the ionic species in $PM_{2.5}$ was higher than that in $PM_{10}$. The chloride depletion percentage of $PM_{10}$ and $PM_{2.5}$ in Jeju City was higher than 61% and 66%, respectively. The contribution of sea-salt to the mass of $PM_{10}$ (5.9%) and $PM_{2.5}$ (2.6%) in Jeju City was similar to that in several coastal regions of South Korea. The mass ratio of $Cl^-$ to $Na^+$ in the downtown area of Jeju City was comparable to that in some coastal regions, such as the Gosan Area of Jeju Island, Deokjeok Island, and Taean City. The mass fraction of sea-salt in $PM_{10}$ and $PM_{2.5}$ was very low, and the concentration of sodium and chloride ions in $PM_{10}$ was not correlated with those in $PM_{2.5}$ ($R^2$ < 0.2), suggesting that the effects of sea-salt on the formation of particulate matter in Jeju City might be insignificant. The relationship between $NH_4{^+}$ and several anions such as $SO_4{^{2-}}$, $NO_3{^-}$, and $Cl^-$, as well as the relationship between the measurement and calculation of ammonium ion concentration, suggested that sea-salts may not react with $H_2SO_4$, and $(NH_4)_2SO_4$ may be a major secondary inorganic aerosol component of $PM_{2.5}$ and $PM_{10}$ in Jeju City.