• Journal of the Korean housing association
• /
• v.11 no.2
• /
• pp.149-163
• /
• 2000

노인소비자들은 나이와 함께 기능적인 능력이 감퇴하면서 주택내의 환경이 그들의 한계와 장애를 보완해 줄 수 있게 좀 더 지원적이기를 기대한다. 이러한 노인그룹을 포함하여 모든 사용자에게 독립적이고, 안전하며, 편리한 생활환경을 조성해 주는 것이 유니버셜 디자인이다. 이 연구의 목적은 유니버셜 디자인 개념으로 개발 된 혁신적인 욕실용품들, 즉 높이가 조절되어 앉거나 서서 사용하는 장점 등을 갖춘 세면대와 높이조절이 되는 이동식 샤워기가 장착된 걸어서 들어가며, 접이식 의자가 있는 등의 장점을 가진 욕조에 대한 소비자 의견의 검토이다. 피험자는 미국에 사는 미국노인과 한국노인(50세이상-79세까지)으로 합계 58명이었다. 실험장소는 미국서부소도시 대학의 유니버셜 디자인 연구실로, 이 대학의 협력으로 이곳에 장착된 신개발 설비를 이용하였다. 실험시기는 1997년 5월부터 11월 사이(봄, 가을)로 소비자 의견조사는 3단계로 이루어졌다. 먼저 1단계 설문조사에서는 피험자 거주주택의 욕실환경, 피험자의 목욕방법, 건강과 안전, 새로운 욕실설비에 대한 소비자 의견 등이 조사되었다. 2단계는 실제로 선정 된 욕실설비의 사용실험으로 피험자가 옷입은 상태에서 목욕을 가정하여 선택된 설비의 사용동작을 하면서(비디오 촬영) 조사자의 조사표에 의한 질문에 답하였다. 3단게는 2단계의 사용실험 후 유니버셜 디자인 된 욕실설비의 가정 내 도입의사 등의 조사를 하였다. 위에서 설명한 3단계의 소비자 의견조사 및 실험에서 얻은 결과는 다음과 같았다. 1) 미국거주 미국노인과 한국노인의 비교에서 한국노인의 평균 신장이 3cm정도 작았고, 2개이상의 욕실을 가진 비율과 학벌, 독신거주비율은 미국노인이 다소 높았고, 욕조 소유율은 한국노인이 높았다. 2) 새로운 욕실 설비에 대한 소비자 의견은 미국과 한국노인 모두 유니버셜 디자인된 새 설비의 장점을 인정하였다. 욕조와 세면조가 매력적이라 평하였고 샤워조작기가 색상구분으로 도운물과 찬물인지가 편하며, 접이식 의자가 유용하며, 문 달린 욕조의 안전 손잡이와 욕조가장자리를 잡고 안전하게 출입한다고 했다. 그러나 욕조길이와 높이에서 두 나라간에 차가 있어 앞으로 치수에 대한 것이 연구과제로 지적되었다. 3) 욕실 설비 개발 시 유니버셜 디자인 용품에 요구되는 목표는 안전하게 쓸 수 있고, 가령에 따른 신체장애요소가 커버되어 스스로 사용가능하고, 사용상 번거로움이 없어 정신적 스트레스를 주지않는 것이어야 하겠다. 4) 선택된 유니버셜 디자인 욕실설비는 표준치수의 현 욕조위치에 장착이 가능하여 앞으로 현 주택에의 교체가 가능하였다. 5) 선택된 유니버셜 디자인 욕실설비는 인체치수와 문화가 다른 두 나라 노인 모두 긍정적으로 평가하여 앞으로의 국제적 보급이 기대되었다.

• Land and Housing Review
• /
• v.6 no.3
• /
• pp.147-152
• /
• 2015

Site coefficient and amplification factor of current domestic Seismic Design Code based on American Seismic Code, have no consideration for the domestic ground condition in which the base rock is normally placed within 30m form the surface. By previous studies, the measured spectral acceleration of the result of dynamic centrifugal test and analysis was smaller than the design spectral acceleration for the period over 1.5 sec. Accordingly, in this study structural analysis and design using dynamic centrifugal test result for pile foundation were achieved, and the quantity of concrete and reinforcement of wall frame was compared with each other. Comparison results of cost using KBC the design spectral acceleration of SC, SD site and SDS, the quantity of reinforcement using SDS for SD site was 17~23% smaller than using the design code SD site.

• Journal of the Korean housing association
• /
• v.11 no.4
• /
• pp.85-96
• /
• 2000

The purpose of this study was to evaluated noise environment of the low-rise multi-family house in Athens, Georgia. The results of this study can be applied to the prevention of noise when planning multi-family houses, roads and cities in Korea. The subjects of this study were the place of 1m, 10m, 50m, 100m from 4-lane road ofT apartment and 233 residents lived in the low-rise multi-family houses in Athens. The results of this study were as follows. 1. The average noise level at 1m, 10m, 50m and 100m was 55.5dB, 46.7dB, 43.0dB, 43.0dB and 41.2dB respectively from 4-lane road of T apartment. From the view of the standard in this study, the physical noise was good. 2. The results of the residents subjective response on the noise were as follows. The external noise residents felt - that was a noise by operating machines, and traffic noise - ware as 2.57 on average. The noise by the daily activities, the noise of nature are a little as 2.38 on average. They were disturbed a little by the external noise. They felt the solid born sounds(average 2.49) more than airbone sound(average 2.23) by the internal noise. They are suffered worse from noise in summer and they worse from 8-12 oclock due to external noise and 16-20 oclock due to internal noise. Comparing the noise environment of Korean with that of American, I found a meaningful difference of nature and the noise of daily activities of external noise and all internal noise.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.7
• /
• pp.462-469
• /
• 2015

This study was carried out to examine characteristics of various acoustic indicators evaluating speech intelligibility such as reverberation time(T₃₀), D₅₀, C₅₀ and speech transmission index(STI) in Korean elementary school classrooms. Results showed that mean T₃₀ at middle frequencies(500 Hz to 2000 Hz) measured in 9 classrooms was about 0.75 s, which exceeds a regulation specified on American National Standards(ANSI); 0.60 s. Mean D₅₀, C₅₀ and STI were 60 % to 66 %, +2 dB to +3 dB, and 0.65, respectively. The maximum difference in D₅₀ and C₅₀ according to different receiver points in a classroom was 13 % and 2.5 dB, while the maximum difference in T₃₀ was 0.03 s. Whereas STI measured in classrooms has relatively low correlation with other indicators, correlation between D₅₀ and C₅₀ was high, R²=.9964. In addition, T₃₀ and C₅₀ were fitted well as logarithmic regression curve with R²=.9610. It was +3.73 dB in C₅₀ and 68 % in D₅₀ which are the value corresponding to 0.60 s in T₃₀ on this curve.

• Journal of the Korean housing association
• /
• v.18 no.5
• /
• pp.85-91
• /
• 2007

This is a case study for improving the sound environmental quality of cafeteria in university campus. The purpose of the study is to find out the present condition of physical level, type, and cause of indoor noise of cafeteria in university campus by comparison with a restaurant near campus. Research methods were field survey and questionnaire survey. Field survey was consisted of measurement on equivalent and instant noise level and observation on noise type. Respondents of questionnaire survey were 60 students using subject cafeteria or restaurant. Surveys were carried out in the 8th and in the 14th of December 2005. The results are as follows. 1) Indoor noise levels of the cafeteria were measured as $67.2{\sim}76.6$ (average 73.3) dB(A)Leq5min and $60.3{\sim}90.5$ (average 71.2) dB (A), exceeded the indoor noise recommended value of ASHRAE (American Society of Heating, Refrigerating and Air Conditioning Engineers). But noise levels of the restaurant were $61.6{\sim}70.4$ (average 66.9) dB(A)Leq5min and $59.8{\sim}70.6$ (average 64.9) dB(A). 2) The users's responses on major noise type in the cafeteria were 'noise by handling equipment and tableware', 'noise by moving chairs', and 'talcing noise', but 'taking noise' and 'background music' in the restaurant. 3) It was found that indoor noise level of the cafeteria was caused by sound reflection of finishing materials, noise diffusion by open type kitchen, and dragging noise of movable furniture.

• Steel and Composite Structures
• /
• v.8 no.2
• /
• pp.145-158
• /
• 2008

In slender sections there is a substantial post-buckling strength provided after the formation of local buckling waves. These waves happened due to normal stresses or shear stresses or both. In this study, a numerical investigation of the behavior of slender I-section beams in combined pure bending and shear has been described. The studied cases were assumed to be prevented from lateral torsional buckling. To achieve this aim, a finite element model that simulates the geometric and material nonlinear nature of the problem has been developed. Moreover, the initial geometric imperfections were included in the model. Different flange and web width-thickness ratios as well as web panel aspect ratios have been considered to draw complete set of interaction diagrams. Results reflect the interaction behavior between flange and web in resisting the combined action of moments and shear. In addition, the web panel aspect ratio will not significantly affect the combined ultimate shear-bending strength as well as the post local buckling strength gained by the section. Results are compared with that predicted by both the Eurocode 3 and the American Iron and Steel specifications, AISI-2001. Finally, an empirical interaction equation has been proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.8
• /
• pp.785-789
• /
• 2013

Worm gear sets may be either single- or double-enveloping. In a single-enveloping set, the worm wheel is cut into a concave surface, thus partially enclosing the worm when meshed. The double-enveloping worm gear is similar to the single-enveloping gear; however, the worm envelopes the worm gear. Thus both are throated. The double-enveloping worm gear has more of the tooth surface in contact than the single-enveloping worm gear. The larger contact area increases the load-carrying capacity. For this reason, double-enveloping worm gearing is widely applied in heavy-duty machinery, for applications including construction and metallurgy. In this paper, we designed a compact reduction gear that is highly efficient using double-enveloping worm gears. We calculated the bearing load in the worm gearing to select the bearing and the housing surface area according to the recommended values from AGMA(American Gear Manufacturers Association). The finite element method was used to assess the structural integrity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.12
• /
• pp.663-672
• /
• 2017

Building information modeling (BIM) technology based on 3D modeling has been applied to the entire domestic construction industry since 2010. It can calculate quantity take-off considering construction productivity at design phase. Based on this, it is possible to improve the reliability of construction cost prediction of design phase in the process of cost estimation. However, Building Information Level (BIL) defined by Ministry of Land, Infrastructure and Transport and Public Procurement Service does not seem to offer doable environment due to the lack of detailed application items. By calculating construction cost that meets Construction Cost Estimate Accuracy by American Association of Cost Engineers (AACE) through quantity take-off and cost estimation based on 3D modeling of BIM technology, a BIL improvement proposal at design phase for Mechanical Contracts and Construction is provided here. Results showed that properties including outline and minimum specification of the main equipment, internal main piping, and internal main duct should be defined from the intermediate design phase to have reliable cost estimation.

• Journal of the Korean Home Economics Association
• /
• v.20 no.3
• /
• pp.85-102
• /
• 1982

The current employment status among young home economists and perspectives in occupations for prospective Home Economics graduates were explored in this study which utilized information from 17 to 21 colleges in Korea and colleges in the United States during the five years of 1977∼1981. The Home Economics content areas covered in this study were Clothing and Textiles, Foods and Nutrition, Housing and Interior Design, and Child Development and Family Life. The highest percentage of Korean graduates in Clothing and Textiles was employed either as teachers at the junior high school level or as designers in the clothing and textile industries. Quite a number of the graduates were engaged in further studies at the graduate level. Korean graduates with a master's degree were teaching at the college level and some had furthered their studies at the doctorate level either here or abroad. Koreans with a bachelor's degree in Foods and Nutrition held jobs as teachers in junior high school, dieticians at mass feeding institutions and hospitals, food scientists in food industries, and researchers in institutions. Those with a master's degree were teaching at the college level. Americans with a bachelor's degree worked as dieticians, supervisors in restaurants and institutions, extension workers, researchers at various facilities, teachers and clerks. Americans with a master's or doctorate degree were engaged in teaching at colleges or supervising at research or working as extension specialists. In general, Korean graduates were found to hold positions in less varied areas than their American counter-parts. Among forty-nine graduates those working in their professional field reported less sex discrimination that those working in other fields. The major area of employment in Housing and Interior Design or Home Management graduates in Korea was teaching while in the United States it was extension work, business, governmental work and teaching. It was suggested that in the future, career development in Korea be further explored to include extension service, research, social welfare, financial planning, business, free-lancing, funeral home, home-call, and correctional education. Interviews with executives from 6 business enterprises indicated that most of them were aware of the potential contribution home economists could make for their companies but they expressed a negative attitude towards women in general due to their short stay on the job. Jobs held by Child Development and Family Life majors with a bachelor's degree in Korea were mostly teaching positions in public, junior and senior high school. However, jobs such as nursery school teaching, working in clinical setting, business, and teaching at public, junior and senior high school predominated in the United states. Most Korean graduates with a master's degree were teaching in professional colleges while in the United Stated the job variation among the graduates was rather evenly distributed among teaching at college level, public and high school, nursery school and administration areas. Reports from 7 child development majors on the job indicated that they were paid less that secretarial workers. Only half of them were working in their major area and these expressed satisfaction with their work. Two thirds of the respondents indicated no sex discrimination. It was suggested that in the future Child Development and Family Life majors pursue employment in counseling, guidance, recreation, mass media, administration and outreach work as well as education, research and parent education in services for children, teen-agers, adults and families.

• Structural Engineering and Mechanics
• /
• v.56 no.4
• /
• pp.667-694
• /
• 2015

The suspended dome system is a new structural form that has become popular in the construction of long-span roof structures. Suspended dome is a kind of new pre-stressed space grid structure that has complex mechanical characteristics. In this paper, an optimum topology design algorithm is performed using the enhanced colliding bodies optimization (ECBO) method. The length of the strut, the cable initial strain, the cross-sectional area of the cables and the cross-sectional size of steel elements are adopted as design variables and the minimum volume of each dome is taken as the objective function. The topology optimization on lamella dome is performed by considering the type of the joint connections to determine the optimum number of rings, the optimum number of joints in each ring, the optimum height of crown and tubular sections of these domes. A simple procedure is provided to determine the configuration of the dome. This procedure includes calculating the joint coordinates and steel elements and cables constructions. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design-American Institute of Steel Constitution). This paper explores the efficiency of lamella dome with pin-joint and rigid-joint connections and compares them to investigate the performance of these domes under wind (according to the ASCE 7-05), dead and snow loading conditions. Then, a suspended dome with pin-joint single-layer reticulated shell and a suspended dome with rigid-joint single-layer reticulated shell are discussed. Optimization is performed via ECBO algorithm to demonstrate the effectiveness and robustness of the ECBO in creating optimal design for suspended domes.