• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.411-414
• /
• 2000

우리가 일반적으로 모니터에서 작업을 하는 경우 주로 백열등이나 형광등의 조명을 켠 상태에서 하게된다 이런 경우 모니터 상의 동일한 색도는 주위 조명이 바뀜에 따라 다르게 느껴지며 특히 주위 조명의 색도와 모니터의 색도가 틀린 경우는 더욱더 다르게 느껴진다[1]～[3]. 이 논문에서는 우리가 생활하는 일반 환경인 백열등이나 형광등 아래의 모니터 상에 영상을 재현 시 주위 조명의 영향을 고려한 색 재현 알고리즘을 제안한다. 임의의 환경에서 사람의 색 인식에 영향을 미치는 요소는 장면에 존재하는 조명의 색 특성과 물체의 색 특성에 의존한다. 단순한 물체의 표면 반사가 아닌 모니터 등의 조명 역할을 하는 표면이 존재하는 경우는 두 개 이상의 조명이 있는 형태이다. 두개 이상의 조명이 존재하는 경우, 사람들이 느끼는 백색점(white point)은 각 조명의 색도 벡터(chromaticity vector)의 조합으로 표현된다. 본 논문에서는 임의 환경에서 사람이 인식하는 백색점을 모델링하기 위하여 주위 환경이 백색점의 인식에 미치는 영향을 분석하였으며 모니터 상의 색 재현시 주위 조명의 영향을 주위 조명에 의해 생성되는 모니터 표면의 경면 반사(specular reflection)에 의한 영향과 인간 시각의 색 순응(color adaptation) 백색점의 변화 두 가지로 나누어 분석하였다.

• 한국분무공학회지
• /
• 제4권1호
• /
• pp.27-33
• /
• 1999

An experimental study has been conducted to clarify the effect of vapor on droplet evaporation. Droplets of water, ethanol, n-hexadecane and n-heptane were exposed in air stream. Temperature, pressure, and flow velocity in the ambient air are 470K, 1 atm, and 2m/s, respectively. Measurements are carried out for the wide range of water vapor concentration$(0%\sim40%)$. To obtain the time histories of droplet diameter, suspended droplet in hot and humid air stream was synchronized with a back flash light, and enlarged droplet images were taken on a CCD camera. With the vapor concentration increasing, the evaporation rate constant of water droplet decrease slightly and the droplet of ethanol and n-heptane increase actively. The evaporation rate constant of n-hexadecane which has higher boiling point than water increases within around 30% of the concentration.

• 센서학회지
• /
• 제23권4호
• /
• pp.259-265
• /
• 2014

When raining or snowing, windshield wiper system is very important for safety of driver. However, manual wiper system frequently needed to be controlled for sufficient visibility and it was very uncomfortable. So, rain sensor which controls automatically was developed. This rain sensor technology uses optical sensing technique sensed the rainfall by receiving reflected light of rain dropped on the windshield. The technology used optical sensor was simple and easy to implement as a rain sensing system in the car. However, it is sometime shown low accuracy to measure rainfall on the windshield when affected by ambient lights from surroundings. It is also given inconvenience to the driver to control the car. To solving these problems, we propose a rain sensing system using image sensor and the fuzzy wiper control algorithm.

• International Journal of Automotive Technology
• /
• 제2권3호
• /
• pp.103-107
• /
• 2001

Many researches on pressure-swirl injectors due to the variety of application have been conducted on the effects of nozzle design, operating conditions, properties of liquid and ambient conditions on the flow and spray characteristics. The breakup length of conical emulsified fuel sheet resulting from pressure-swirl atomizer using in the oil burner was investigated with the digital image processing method with neat light oil and emulsion with water content of lotto% and the surfactant content of 1-3%. The injection pressure ranged from 0.1 to 1.2 MPa was selected. The various regimes for the stage of spray development within the experimental conditions selected in this study is newly suggested in terms of Ohnesorge number and injection pressure. The breakup length for both criteria show the same tendency even though the random nature of perforation and disintegration process of liquid sheet. The stage of spray development is widely different with the physical properties of liquid atomized, mainly viscosity of liquid. The breakup length decreases smoothly with increase in the injection pressure for the lower viscous liquid.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1402-1403
• /
• 2011

Photovoltaic solar energy policy in the keynote of the world in the development of new technologies in terms of renewable energy sources has been a great interest. Solar energy is the energy density, low light intensity, temperature, and a lot of areas affected by the difference, the effective use difficult. For the installation of photovoltaic solar power systems to develop farmland or forest land resulting from deforestation has become such a problem. In this paper, a way to resolve these issues as part of the development of the reservoir water through the efficient use of land and water resources through the eco-friendly energy production, water quality improvement, the cooling effect of solar modules, solar water system has the advantage of was installed. Terrestrial solar systems installed under the same conditions and solar radiation, power, module temperature, ambient temperature and analyzed. Through this award to demonstrate the effectiveness of the solar system is.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.205-207
• /
• 2009

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14W power consumption and start up voltage time is under the15ms in the ambient temperature -20 $^{\circ}C$.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1790-1795
• /
• 2008

Energy scavenging is a technique that converts ambient energy, for example, vibration and light, to electrical energy in order to supply power to low power electronic devices such as ubiquitous sensors. In this paper, we propose an optimal operation condition of power delivery circuit and design strategy for energy scavenging system in which the generated power is order of microwatt and, consequently, efficient handling of power is critical. We also propose that high data transmission rate is more realistic optimal design objective rather than high energy efficiency. It is shown that disconnection of load from the storage capacitor right after data transmission reduces energy wasting and that optimal value of storage capacitor can be determined at this condition. The feasibility of our propose is proved by experiments and we believe that the proposed design strategy will promote the application of piezoelectric micropower generator to the ubiquitous sensor networks.

• 한국대기환경학회지
• /
• 제17권2호
• /
• pp.169-177
• /
• 2001

The concentrations of ambient volatile organic compounds (VOC) were investigated from the Kwangju area. A total number of sixty six sample were collected and analyzed during day/night periods from June to September 1999. Each of the canister sample ws analyzed for alkane and aromatic compounds using a GC/MSD sys-tem. The concentration of VOC in mean day/night time, when compared, was in the order: toluene(16%)> isobu-tane(14%)= acethylene(14%)> propane(12%)> ethane(11%)> butane(9%). The VOC concentrations were gene-rally higher during the daytime than the nighttime. The VOC with light weight(such as an alkane group, $C_2$-C(suh)5) showed generally higher concentrations during day/nighttime than the VOC with heavy weight (such as an aromatic group). High correlations were among the VOC emitted from the similar sources.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1244-1248
• /
• 2005

In this paper, we propose fuzzy c-means (FCM) to solve recognition errors in invariant range image, multi-pose face recognition. Scale, center and pose error problems were solved using geometric transformation. Range image face data was digitized into range image data by using the laser range finder that does not depend on the ambient light source. Then, the digitized range image face data is used as a model to generate multi-pose data. Each pose data size was reduced by linear reduction into the database. The reduced range image face data was transformed to the gradient face model for facial feature image extraction and also for matching using the fuzzy membership adjusted by fuzzy c-means. The proposed method was tested using facial range images from 40 people with normal facial expressions. The output of the detection and recognition system has to be accurate to about 93 percent. Simultaneously, the system must be robust enough to overcome typical image-acquisition problems such as noise, vertical rotated face and range resolution.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.530-532
• /
• 2008

Inorganic metal multi-layer(IMML) consisting of Al/Al:SiO/Al was developed as a cathode for OLED to reduce the reflectance generated from ambient light. Device structure of green OLED was ITO/2-TNATA/$\alpha$-NPD/$Alq_3$:C545T/Balq/$Alq_3$/LiF/IMML and IMML was composed of three different layers: thin aluminum layer, aluminum layer doped with silicon monoxide and thick aluminum layer. Average reflectance of green OLED was 9.63% while that of conventional OLED with or without polarizer showed the average reflectance of 8.54% and 66% respectively at visible range from 380 nm to 780 nm.