• 제목/요약/키워드: Ambient Control

검색결과 606건 처리시간 0.026초

Space Charge Behavior of Oil-paper Insulation Thermally Aged under Different Temperatures and Moistures

  • Zhou, Yuan-Xiang;Huang, Meng;Chen, Wei-Jiang;Jin, Fu-Bao
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권3호
    • /
    • pp.1124-1130
    • /
    • 2015
  • Moisture and high temperature are the most important factors that lead to the ageing of oil-paper insulation, but the research about space charge characteristics of oil-paper insulation does not take the combined effect of ambient temperature, moisture and thermal ageing into account. The pulsed electroacoustic (PEA) method was used to investigate the influence of moisture and temperature on space charge characteristics of oil paper at different ageing stages. The results showed that moisture could speed up formation of space charge in oil paper when water concentration was low, but the formation was restrained if the water concentration was high. At the beginning of thermal ageing, heterogeneous charge accumulation had predominance, but it gradually changed to homogeneous charge injection with ageing. It was believed that moisture concentration could speed up ageing and enhance charge accumulation on one hand, and accelerate or slow down the establishment speed of space charge on the other hand, therefore, charge accumulation type changed with ageing. The more seriously the oil-paper insulation was thermally aged, the deeper the trap energy level was, hence more space charge was trapped, which could be speeded up by increasing the ageing temperature, but the effect of ambient temperature did not fit the Arrhenius law.

Synergistic Effects of Electron-beam Irradiation and Leek Extract on the Quality of Pork Jerky during Ambient Storage

  • Kim, Hyun-Joo;Kang, Mingu;Yong, Hae In;Bae, Young Sik;Jung, Samooel;Jo, Cheorun
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권4호
    • /
    • pp.596-602
    • /
    • 2013
  • To investigate the synergistic effect(s) of electron-beam (EB) irradiation and leek (Allium tuberosum Rottler) extract on the quality of pork jerky during ambient storage, we irradiated prepared pork jerky samples (control and samples with 0.5% and 1.0% leek extract) with EB technology at doses of 0, 1, 2, and 4 kGy, stored them for 2 months at $25^{\circ}C$, and analyzed them. Water activity was 0.73 to 0.77 in non-irradiated samples, and no significant difference in the water activity was observed between the samples treated with leek and the control. The total aerobic bacterial count was significantly decreased with an increase in the irradiation dose and leek extract addition when compared to that of the control ($4.54{\pm}0.05$ log CFU/g). Further, the Hunter color values ($L^*$, $a^*$, and $b^*$) were found to be significantly decreased following leek extract addition and EB irradiation. However, the color values, especially the $a^*$ value of the irradiated samples significantly increased during storage. Notably, increasing the EB irradiation dose enhanced the peroxide value. Sensory evaluation revealed that irradiation decreased flavor and overall acceptability. Our findings suggest the use of EB irradiation in combination with leek extract to improve the microbiological safety of pork jerky. However, in order to meet market requirements, novel methods to enhance the sensory quality of pork jerky are warranted.

0.18㎛ CMOS 공정을 이용한 MEMS 마이크로폰용 이중 채널 음성 빔포밍 ASIC 설계 (An ASIC implementation of a Dual Channel Acoustic Beamforming for MEMS microphone in 0.18㎛ CMOS technology)

  • 장영종;이재학;김동순;황태호
    • 한국전자통신학회논문지
    • /
    • 제13권5호
    • /
    • pp.949-958
    • /
    • 2018
  • 음성 인식 제어 시스템은 사용자의 음성을 인식하여 주변 장치를 제어하는 시스템이다. 최근 음성 인식 제어 시스템은 스마트기기 뿐만 아니라, IoT(: Internet of Things), 로봇, 차량에 이르기까지 다양한 환경에 적용되고 있다. 이러한 음성 인식 제어 시스템은 사용자의 음성 외에 주변 잡음에 의한 인식률 저하가 발생한다. 이에 본 논문은 사용자의 음성 외에 주변 잡음을 제거하기 위하여 MEMS(: Microelectromechanical Systems) 마이크로폰용 이중 채널 음성 빔포밍 하드웨어 구조를 제안하였으며, 제안한 하드웨어 구조를 TowerJazz $0.18{\mu}m$ CMOS(: Complementary Metal-Oxide Semiconductor) 공정을 이용하여 ASIC(: Application-Specific Integrated Circuit)을 설계하였다. 설계한 이중 채널 음성 빔포밍 ASIC은 $48mm^2$의 Die size를 가지며, 사용자의 음성에 대한 지향성 특성을 측정한 결과 4.233㏈의 특성을 보였다.

Evaluation of Nonthermal Plasma Treatment by Measurement of Stored Citrus Properties

  • Seo, Youngwook;Park, Jong-Ryul;Park, Hoe Man
    • Journal of Biosystems Engineering
    • /
    • 제43권4호
    • /
    • pp.401-409
    • /
    • 2018
  • Decay of fruit is one of the greatest issues in fruit storage. Purpose: In this study, citrus sterilization was performed to evaluate a dry sterilization method using an atmospheric-pressure nonthermal plasma treatment based on a dielectric-barrier discharge technique. Methods: Citrus samples were stored under four different environmental conditions as follows: group A had cold storage with plasma treatment with a temperature of $6.2{\pm}1.0^{\circ}C$ and relative humidity (RH) of $93.4{\pm}8.2%$, group B had ambient-temperature storage with $22.9{\pm}2.3^{\circ}C$ and $82.1{\pm}4.5%$ RH, group C ambient-temperature storage with plasma treatment with $25.3{\pm}2.2^{\circ}C$ and $90.0{\pm}2.8%$ RH, and group D had cold storage with $5.7{\pm}1.0^{\circ}C$ and $93.4{\pm}6.5%$ RH. Results: As a result of citrus surface sterilization by plasma treatment, treatment groups A and C together showed an average of 16.1 CFU/mL of mold colonies, while control groups B and D showed an average of $2.2{\times}10^2CFU/mL$ or approximately 13 times greater than the treatment groups. Regarding the mean concentration of aerobic bacteria colonies, the treatment groups (A and C) and control groups (B and D) showed an average of 7.1 CFU/mL and $1.9{\times}10^3CFU/mL$, respectively. This is approximately a 270-fold difference in the concentration of pathogen colonies between treatment and control groups. Conclusions: The results showed the potential of nonthermal plasma treatment for citrus storage in enhancing storage duration and quality preservation.

하층대기의 연직 안정도 지표를 이용한 차량 2부제의 수도권 대기오염도 저감효과 분석 (Evaluation of the Effect of Traffic Control Program on the Ambient Air Quality in Seoul Metropolitan Area Using the Lower Level Stability Index of Atmosphere)

  • 김철희;박일수;이석조;김정수;홍유덕;한진석;진형아
    • 한국대기환경학회지
    • /
    • 제21권2호
    • /
    • pp.243-257
    • /
    • 2005
  • The effects of Traffic Control Program (TCP) on the ambient urban air quality of SO$_{2}$, NO$_{2}$, O$_{3}$, and PM$_{10}$ were evaluated in Seoul metropolitan area by using the lower atmospheric vertical stability index and daily mean wind speeds. The vertical stability index; temperature lapse rate between 1000 hPa and 850 hPa geopotential height fields, were used to identify daily vertical stability index during the 2002 World Cup period where traffic amount was reportedly reduced to half the number of vehicles. The indicated air quality levels of TCP days were then compared with those of the cases observed with analogous vertical stability during the recent 3 years from 2000 to 2002. The result indicates that the effect of TCP on the primary air pollutants are found to be approximately 39$\%$, 23$\%$ and 20$\%$ lower for SO$_{2}$, NO$_{2}$ and PM$_{10}$, respectively. The secondary air pollutant; ozone, showed relatively smaller decreasing rate (13$\%$) of daily mean concentrations (even increased during the night time). The comparison of daily maximum or peak concentrations reveals that the pronounced decreasing effects of TCP on the ambient air quality for both primary and secondary air pollutants, suggesting that TCP is one of the effective strategies to control peak or higher concentrations for most urban scale air pollutants in and around the Seoul metropolitan area.

An Open Top Chamber for Forage Maize to Study the Effect of Elevated Temperature by Global Warming

  • Min, Chang-Woo;Khan, Inam;Kim, Min-Jun;Yoon, Il-Kyu;Jung, Jeong Sung;Lee, Byung-Hyun
    • 한국초지조사료학회지
    • /
    • 제41권3호
    • /
    • pp.183-188
    • /
    • 2021
  • The increase in temperature due to climate warming is predicted to affect crop yields in the future. Until now, various types of OTC (open top chamber) that simulate the future climate condition have been developed and used to study the effect of temperature increase due to global warming on maize growth. However, in most OTCs, high equipment and maintenance costs were required to artificially increase the temperature. This study was carried to develop a cost-effective and simple OTC suitable for climate warming experiments for forage maize. Three octagonal OTCs with a height of 3.5 m × a diameter of 4.08 m and a partially covered top were constructed. The lower part of OTC covered film was opened at a height of 26 cm (OTC-26), 12 cm (OTC-12) from the ground surface, or not opened (0 cm, OTC-0). Mean air temperatures during the daytime on a sunny day in OTC-0, OTC-12 and OTC-26 increased to 3.23℃, 1.33℃, and 0.89℃, respectively, compared to the ambient control plot. For a pilot test, forage maize, 'Gwangpyeongok' was grown at OTCs and ambient control plots. As a result, in the late maize vegetative growth phase (July 30), the plant height was increased more than 45% higher than the ambient control plot in all OTC plots, and the stem diameter also increased in all OTC plots. These results indicate that it is possible to set the temperature inside the OTC by adjusting the opening height of the lower end of the OTC, and it can be applied to study the response of forage maize to elevated temperature. An OTC, with its advantages of energy free, low maintenance cost, and simple temperature setting, will be helpful in studying maize growth responsiveness to climate warming in the future.

Temperature Control of an Oil Cooler System For Machine Tools Using a Fuzzy- Logic-Based Algorithm

  • Kim, Sun-Chul;Hong, Dae-Sun;Lee, Choon-Man;Kim, Gyu-Tak
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1006-1011
    • /
    • 2004
  • Recently, technical trend in machine tools is focused on enhancing of speed, accuracy and reliability. Such high speed usually results in thermal displacement and structural deformation. To minimize such thermal effect, most precision machine tools adopt high precision cooling system. This study proposes a temperature control for an oil cooler system using PI control with fuzzy logic. In a cooler system, the refrigerant flow rate is controlled by rotational speed of the compressor, where the outlet oil temperature is selected as the control variable. The fuzzy control rules iteratively correct PID parameters to minimize the error, difference between the outlet temperature and the reference one. Here, the ambient temperature is used as the reference one. To show the effectiveness of the proposed method, a series of experiments are conducted for an oil cooler system of machine tools, and the results are compared with the ones of a conventional PID control. The experimental results show that the proposed method has advantages of smaller overshoot and smaller steady state error.

  • PDF

펠티어 소자의 PWM 전류제어를 이용한 알루미늄 판의 온도제어 (Temperature Control of Aluminum Plate by PWM Current Control of Peltier Module)

  • 방두열;권대규;이성철
    • 한국정밀공학회지
    • /
    • 제23권10호
    • /
    • pp.60-67
    • /
    • 2006
  • This paper presents the temperature control in aluminum plate with Peltier module. From the experimental work, Peltier module is used to control the temperature of small aluminum plate for both heating and cooling with the control of current and fan ON/OFF. And current control of Peltier module was accomplished by PWM method. As a result of experiments, it is proper that operate cooling fan only while cooling duration and there exist a proper cooling current to drop temperature rapidly. It takes about 125sec to control temperature of aluminium plate between $30^{\circ}C$ and $70^{\circ}C$ and about 70sec between $40^{\circ}C$ and $60^{\circ}C$, in ambient temperature $28^{\circ}C{\sim}29^{\circ}C$ while cooling fan is operated only cooling duration. With the cooling current, temperature control of aluminum plate was accomplished more rapidly in comparison without cooling current. Future aim is to realize more rapid temperature control and develop SMHA(special metal hydride actuator) by using Peltier module as a heating and cooling source.

PWM 전류제어와 펠티어 소자를 이용한 알루미늄 판의 온도 제어 (Temperature Control of the Aluminum Plate with Pottier Module by PWM Current Control)

  • 방두열;권대규;이성철
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.897-900
    • /
    • 2005
  • This paper presents temperature control of aluminum plate using Peltier module. As one of the thermoelectric effect, Peltier effect is heat pumping phenomena by electric energy. So if current is charged to Peltier module, it absorbs heat from low temperature side and emits heat to high temperature side. In this experiment, Peltier module is used to control the temperature of small aluminum plate with heating and cooling ability of Peltier module with current control and fan On/OFF control. And current control of Peltier module was accomplished by PWM method. As a results of experiments, it takes about 125sec to control temperature of aluminium plate between $30^{\circ}C\;and\;70^{\circ}C$ and about 70sec between $40^{\circ}C\;and\;60^{\circ}C$, in ambient temperature $29^{\circ}C$ while operating cooling fan only while cooling duration. Future aim is to realize more rapid temperature control and develop SMHA(special metal hydride actuator) by using Peltier module as a heating and cooling source.

  • PDF

Effects of Chilled Drinking Water on Performance of Laying Hens during Constant High Ambient Temperature

  • Gutierrez, W.M.;Min, W.;Chang, H.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권5호
    • /
    • pp.694-699
    • /
    • 2009
  • The present study was conducted to evaluate the effect of chilled drinking water on the productivity of laying hens under constant high ambient temperature. A total of seventy-two, 123-day-old Hy-line brown layers was divided into two equal groups. The first group (UDWG) was given unchilled water ($23.0{\pm}2.5^{\circ}C$) as a control, and the second group (CDWG) was given chilled water ($16.0{\pm}0.5^{\circ}C$). The laying hens were kept at $30^{\circ}C$ constant temperature with 50% relative humidity and were exposed to 17 h of light per day. Feed intake, egg production, egg quality (egg weight, shell weight, shell thickness, egg color, yolk color, and Haugh unit), and blood samples were collected and analyzed. The results showed that the feed intake of CDWG laying hens was significantly higher (11.64%) than the UDWG counterparts (p<0.01). Egg production of CDWG was also significantly higher (11.27%) than the UDWG counterparts (p<0.001). Furthermore, we observed that the CDWG laying hens had significantly higher (11.72%) levels (p<0.10) of blood calcium, with a corresponding value of 21.92 mg/dl compared to the UDWG hens (19.62 mg/dl). The higher calcium concentration in the CDWG animals may contribute to increased egg production. The CDWG laying hens also contained higher (12.53%) phosphorus concentrations in blood compared to the UDWG (4.22 mg/dl vs. 3.75 mg/dl), although not statistically different (p>0.10). Egg weight and egg quality were not affected by chilled drinking water. In conclusion, providing chilled drinking for laying hens under high ambient temperature improved feed intake and egg production.