• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권3호
• /
• pp.242-246
• /
• 2006

Objective : This is to report the criteria of success of intraoral distraction osteogenesis for alveolar augmentation in the severely atrophied alveolar defects through clinical result of 2 cases. Subjects and Methods : Anterior segmental osteotomy was performed and alveolar distractors (Martin and Leibinger, Germany) were applied each in 2 patients with severely defected anterior maxillary area. The osteomized alveolar segments were distracted by 1mm a day after latency period. After the consolidation period implants were installed with removal of distractor. The implants were evaluated clinically and radiographically. Results : In Case I, the distracted bone was directed to the palatal side, and another augmentation treatment - block bone graft, guided bone regeneration - was needed. In Case II, the successful alveolar bone augmentation was achieved. Dental implant was placed on distracted alveolar bone, and showed good osseointegration and good function without any complication. Conclusion : Distraction osteogenesis can be a good choice for alveolar ridge augmentation of severely atrophied ridges. However, the anterior esthetic prosthetics relies on the control of the vector, the kind of distractor, the healing capacity of patient and the etiology of atrophy. Therefore another study of each category would be needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권4호
• /
• pp.329-338
• /
• 2006

Objectives: Distraction osteogenesis has recently evolved a challenging technique to overcome the limitations of conventional augmentation procedures. The aim of this report was to evaluate the clinical result of alveolar distraction osteogenesis for implant installation. Methods: Twenty five patients with alveolar ridge deficiencies were treated with vertical alveolar distraction osteogenesis by intraoral device (total 27 devices: 25 extraosseous and 2 intraosseous devices). After the latency periods of 5-7 days, activation of the device was started. The distraction rhythm and rate was 0.75-1.0 mm a day with 2 or 3 times a day. After 3-4 months, dental implants were placed with removing the distractor simultaneously. Results: On average, a vertical gain of $9.8{\pm}3.4\;mm$ was obtained by distraction osteogenesis. Total 84 implants were installed. Average follow up period was $13.5{\pm}7.5$ months. No implant was removed during the follow up period. Three patients showed infection during the distraction osteogenesis. Three devices were broken and 2 devices among them were replaced with new one. Conclusion: Relatively larger amount of alveolar bone augmentation could be obtained with distraction osteogenesis. For the ideal anatomically and functionally ideal regeneration of alveolar bone to install dental implant, the complication of distraction should be controlled.

• Imaging Science in Dentistry
• /
• 제51권2호
• /
• pp.175-185
• /
• 2021

Purpose: The primary objective of this study was to analyze the thickness and height of alveolar bone around the maxillary and mandibular incisors. Additionally, this study aimed to compare bone parameters between Caucasian (CC) and African American (AA) female patients. Materials and Methods: In this retrospective pilot study, 50 female subjects(25 CC and 25 AA) were included. The inclusion criteria were AA or CC women between the ages of 18 and 50 with a normo-divergent facial pattern and Angle's class I, end-on class II, or mild class III malocclusion. The distance from the cementoenamel junction (CEJ) to the buccal and lingual alveolar crest; the alveolar ridge thickness at the mid-root and apex; and the buccal and lingual bone thickness at 3, 6, and 9mm from the CEJ were measured. Results: No significant difference was found (P>0.05) in the cortical bone thickness at 3mm, 6mm, or 9mm from the alveolar crest between CC and AA populations for most measurements. A significant difference in bone thickness was found (P<0.05) for the lingual surface of the central incisor, with maxillary bone thickness found to be higher than mandibular bone thickness. The measurements of lingual thickness were larger than those of buccal thickness for both races. Conclusion: There were no differences in maxillomandibular anterior alveolar bone measurements between normo-divergent adult AA and CC women, except for a few parameters at varying locations. However, future studies can be planned based the current pilot study data, which may provide valuable information.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제49권6호
• /
• pp.347-353
• /
• 2023

This case report presents inferior alveolar nerve (IAN) repositioning as a viable approach for implant placement in the mandibular molar region, where challenges of severe alveolar bone width and height deficiencies can exist. Two patients requiring implant placement in the right mandibular molar region underwent nerve transposition and lateralization. In both cases, inadequate alveolar bone height above the IAN precluded the use of short implants. The first patient exhibited an overall low alveolar ridge from the anterior to posterior regions, with a complex relationship with adjacent implant bone level and the mental nerve, complicating vertical augmentation. In the second case, although vertical bone resorption was not severe, the high positioning of the IAN within the alveolar bone due to orthognathic surgery raised concerns regarding adequate height of the implant prosthesis. Therefore, instead of onlay bone grafting, nerve transposition and lateralization were employed for implant placement. In both cases, the follow-up results demonstrated successful osseointegration of all implants and complete recovery of postoperative numbness in the lower lip and mentum area. IAN repositioning is a valuable surgical technique that allows implant placement in severely compromised posterior mandibular regions, promoting patient comfort and successful implant placement without permanent IAN damage.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권1호
• /
• pp.66-72
• /
• 2011

A severely vertical resorbed ridge is a significant challenge in implant dentistry. To solve this problem, several augmentation techniques, such as guided bone regeneration (GBR), onlay bone grafts, distraction osteogenesis, and ridge splitting techniques, have been proposed and used for several years. Among these methods, vertical ridge augmentation using guided bone regeneration aims to build space and guide osteoblasts to this space to promote osteogenesis. The aim of guided bone regeneration is to maintain and stabilize the space and block the proliferation of adjacent soft tissue. In our hospital, we encountered a case of a woman in her forties with an atrophied mandible, who underwent implant surgery in the right mandible. Titanium reinforced Gore-Tex (TRG) was used to augment the mandible and titanium mesh was used in the left mandible. Favorable results were obtained. This report compares the two methods and reviews the relevant literature.

• 대한치과보철학회지
• /
• 제57권3호
• /
• pp.304-311
• /
• 2019

치아가 발거된 치조제는 수직, 수평적인 골흡수가 점진적으로 일어나게 되며 흡수의 양상은 수평적으로 서로 다르게 나타난다. 이로 인해 상대적으로 하악궁이 상악궁에 비해 확장되는 경향을 보이며, 상악과 하악 치조제 간의 위치관계에 따라 적합한 인공치 배열 방법을 선택하여 의치의 안정을 도모해야 한다. 본 증례는 77세 남자환자로 기존에 사용하던 상악 총의치, 하악 국소의치의 재제작을 희망하였다. 상악과 하악 치조골의 흡수정도에서 차이를 보여 치조제 간의 위치관계에 대한 정확한 평가가 필요하였고, 이를 위해 치과용 CAD 소프트웨어를 활용했다. 교합기에 부착된 주모형과 교합제를 스캔하여 디지털 스캔 데이터로 변환하고, CAD 소프트웨어 상에서 치조정간선의 법칙에 따라 상악과 하악 치조제간의 위치관계를 평가하여 우측 구치부를 편측 교차교합으로 배열하였다. 보철물 완성 후 주기적인 검진을 거친 결과 의치는 적절한 유지, 안정, 지지를 얻었고 환자 또한 심미적, 기능적으로 만족하였다. 본 증례에서는 상악의 완전 무치악, 하악의 부분 무치악 환자에서 치조제간의 위치관계에 대한 정확한 평가를 위해 디지털 기술을 활용하였으며, 이를 통해 보철치료의 임상 및 기공과정을 보다 효율적으로 진행할 수 있었기에 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제61권1호
• /
• pp.18-25
• /
• 2023

본 증례는 65세 남환으로, 10년 전 편도암으로 하악골이단술을 시행한 환자에서 중립대를 활용한 상하악 총의치 수복 증례이다. 본 환자는 무치악 기간이 짧아 치초제의 흡수가 거의 없으며, 혀의 운동기능에도 이상이 없었지만, 수술 이후의 변화로 인해 하악의 후구치 삼각융기가 상악의 구상절흔보다 안쪽에 위치해 있으며 하악의 구치부 치조제는 상대적으로 설측으로 돌아간 구조를 보였다. 만약 통상적으로 해부학적 지표를 참고하여 치아를 배열한다면, 혀의 기능 공간을 침범하게 되며, 이는 의치의 안정성을 저하시킬 것이다. 이런 경우 중립대 개념을 적용한 의치의 제작은 좋은 참고점이 될 수 있을 것이다. 연성 이장재를 사용하여 중립대를 인기하였으며, 이를 인덱스로 제작하여 치아배열을 시행하였다. 중립대의 가장 큰 장점은 의치의 안정을 얻는 것에 있다. 본 환자의 경우 하악 좌측 구치부가 혀 공간을 침범하지 않도록 구치 치아의 설측배열 한계를 얻기 위해 중립대 기법을 적용하였다. 특히, 치조제의 흡수로 의치의 안정성을 얻기 어려운 난증례 환자의 경우 이러한 방법을 사용한다면 의치의 안정성 면에서 더욱 좋은 결과를 얻을 수 있을 것이라 보기에 본 증례를 보고하는 바이다.

• 대한치과보철학회지
• /
• 제48권3호
• /
• pp.202-208
• /
• 2010

연구 목적: 이 연구의 목적은 골형성단백질 (recombinant human Bone Morphogenetic Protein-2; rhBMP-2)이 코팅된 임플란트가 치조골 증대에 미치는 영향을 알아보는 것이다. 연구 재료 및 방법: 6마리의 비글견이 실험에 사용되었다. 6개의 8 mm 길이의 임플란트가 발치 후 6개월 이상의 충분한 치유기간이 경과한 비글견의 치조골에 5 mm 깊이로 식립되었다. 각각의 동물에 좌측과 우측의 악궁-분할형으로 임의추출하여 한쪽에는 1.5 ml/mg 농도의 rhBMP-2가 코팅된 임플란트를, 반대편에는 코팅되지 않은 대조군 임플란트를 식립하고 임플란트 주변 골에 round bur를 이용하여 피질골 천공을 시행하였다. 점막골막판막에 이완절개를 시행하여 판막을 접합시키고 봉합하여 임플란트가 피개되도록 하였다. 방사선 사진 촬영은 수술 직후 (기준치), 수술 4주후, 수술 8주 후에 시행하였다. 측정은 각 방사선 사진의 임플란트 덮개나사 최상방에서 변연골까지의 거리를 측정하여 골 형성량을 계산하였다. 수술 직후와 수술 8주 후에 임플란트 안정도 (Implant Stability Quotient value; ISQ value)를 측정하였다. 통계분석을 위해 SPSS software를 사용하여 Man-Whitney ranksum test와 Wilcoxon signed ranksum test를 시행하였다. 통계적 유의수준은P=.05를 기준으로 하였다. 결과: 골형성단백질이 코팅된 임플란트에서 수직 결손부 상방으로 약 0.6 mm의 골 형성이 관찰되었다. 대조군에서는 제한된 양의 골 형성 혹은 골 소실이 일어났다. 각 시기에 따른 실험군과 대조군간의 골 형성량에 유의한 차이가 있었다 (P<.05). ISQ value는 수술 직후에는 실험군과 대조군의 유의한 차이가 없었지만 수술 8주 후에는 실험군에서 대조군 보다 유의하게 높게 증가되었다 (P<.05). 결론: 골형성단백질이 코팅된 임플란트는 완전히 치유된 치조골에서 임상적으로 유의한 골 증대 효과가 있는 것으로 보인다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.36.1-36.8
• /
• 2019

Background: This study aims to examine the outcome of simultaneous maxillary sinus lifting, bone grafting, and vertical ridge augmentation through retrospective studies. Methods: From 2005 to 2010, patients with exhibited severe alveolar bone loss received simultaneous sinus lifting, bone grafting, and vertical ridge augmentations were selected. Fifteen patients who visited in Seoul National University Bundang Hospital were analyzed according to clinical records and radiography. Postoperative complications; success and survival rate of implants; complications of prosthesis; implant stability quotient (ISQ); vertical resorption of grafted bone after 1, 2, and 3 years after surgery; and final observation and marginal bone loss were evaluated. Results: The average age of the patients was 54.2 years. Among the 33 implants, six failed to survive and succeed, resulting in an 81.8% survival rate and an 81.8% success rate. Postoperative complications were characterized by eight cases of ecchymosis, four cases of exposure of the titanium mesh or membrane, three cases of periimplantitis, three cases of hematoma, two cases of sinusitis, two cases of fixture fracture, one case of bleeding, one case of numbness, one case of trismus, and one case of fixture loss. Prosthetic complications involved two instances of screw loosening, one case of abutment fracture, and one case of food impaction. Resorption of grafted bone material was 0.23 mm after 1 year, 0.47 mm after 2 years, 0.41 mm after 3 years, and 0.37 mm at the final observation. Loss of marginal bone was 0.12 mm after 1 year, and 0.20 mm at final observation. Conclusions: When sinus lifting, bone grafting, and vertical ridge augmentation were performed simultaneously, postoperative complications increased, and survival rates were lower. For positive long-term prognosis, it is recommended that a sufficient recovery period be needed before implant placement to ensure good bone formation, and implant placement be delayed.

• Journal of Periodontal and Implant Science
• /
• 제49권4호
• /
• pp.237-247
• /
• 2019

Purpose: To analyze the maxillary sinus anatomy over edentulous ridges in the bilateral posterior maxillary area in Taiwanese patients using cone-beam computed tomography (CBCT). Methods: In total, 101 anatomical sites from 61 patients, including 32 premolar and 69 molar regions, were analyzed using CBCT. Measurements were made of the width and height of edentulous ridges, the thickness of the lateral wall of the maxillary sinus, and the presence of a sinus septum and the posterior superior alveolar artery (PSAA). A statistical analysis of the measurements was performed, and correlations among the measurements were assessed. Results: The average ridge width was $10.26{\pm}3.16mm$, with a significantly greater ridge width in the second molar region than in the premolar region. The mean residual ridge height was $8.55{\pm}4.09mm$, and ridge height showed an opposite trend from ridge width for the premolar and molar regions. A sinus septum was present at 5.9% of the sites, and the PSAA was observed in 24.5%. The average thickness of the lateral wall of the maxillary sinus was $2.08{\pm}0.94mm$, with no significant difference between the tooth position and lateral wall thickness. Conclusions: This study presents the anatomical features of the maxillary sinus, which should be considered in sinus lift procedures for implant placement, in the Taiwanese population. The use of CBCT is recommended to avoid intraoperative complications.