• Restorative Dentistry and Endodontics
• /
• v.36 no.1
• /
• pp.12-18
• /
• 2011

Objectives: This retrospective study evaluated the therapeutic effects of the intentional replantation (IR) procedure performed on the maxillary and mandibular molars of 35 patients. Materials and Methods: For the subjects, IR was performed due to difficulties in anatomically accessing the lesions and/or close proximity to the thick cortical bone, inferior alveolar nerve, or maxillary sinus, which rendered the ordinary periradicular surgery impossible. The patients'progress was followed for a year and up to 2 years and 4 months. The success of the procedure was evaluated in terms of clinical and radiographic success (%). Results: The results revealed the following: (a) 1 case (3%) of failed tooth extraction during IR; (b) 2 cases (6%) of extraction due to periodontal diseases and inflammatory root resorption; (c) 3 cases (9%) of normally functioning teeth in the oral cavity with minor mobility and apical root resorption, and; (d) 29 cases (82%) of normally functioning teeth without obvious problems. Conclusions: IR was confirmed to be a reliably repeatable, predictable treatment option for those who cannot receive conventional periradicular surgery because of anatomic limitations or patient factors.

• Journal of Periodontal and Implant Science
• /
• v.50 no.6
• /
• pp.418-434
• /
• 2020

Purpose: The purpose of the present study was to evaluate the effect of silica-calcium phosphate composite (SCPC) granules on bone regeneration in extraction sockets. Methods: Ten patients were selected for a split-model study. In each patient, bone healing in SCPC-grafted and control ungrafted sockets was analyzed through clinical, radiographic, histomorphometric, and immunohistochemical assessments 6 months postoperatively. Results: A radiographic assessment using cone-beam computed tomography showed minimal ridge dimension changes in SCPC-grafted sockets, with 0.39 mm and 1.79 mm decreases in height and width, respectively. Core bone biopsy samples were obtained 6 months post-extraction during implant placement and analyzed. The average percent areas occupied by mature bone, woven bone, and remnant particles in the SCPC-grafted sockets were 41.3%±12%, 20.1%±9.5%, and 5.3%±4.4%, respectively. The percent areas of mature bone and woven bone formed in the control ungrafted sockets at the same time point were 31%±14% and 24.1%±9.4%, respectively. Histochemical and immunohistochemical analyses showed dense mineralized bundles of type I collagen with high osteopontin expression intensity in the grafted sockets. The newly formed bone was well vascularized, with numerous active osteoblasts, Haversian systems, and osteocytes indicating maturation. In contrast, the new bone in the control ungrafted sockets was immature, rich in type III collagen, and had a low osteocyte density. Conclusions: The resorption of SCPC granules in 6 months was coordinated with better new bone formation than was observed in untreated sockets. SCPC is a resorbable bone graft material that enhances bone formation and maturation through its stimulatory effect on bone cell function.

• Imaging Science in Dentistry
• /
• v.53 no.2
• /
• pp.137-144
• /
• 2023

Purpose: This study aimed to evaluate the anatomic circle around the impacted lower third molar to show, document, and correlate essential findings that should be included in the routine radiographic assessment protocol as clinically meaningful factors in overall case evaluation and treatment planning. Materials and Methods: Cone-beam computed tomographic images of impacted lower third molars were selected according to specific inclusion criteria. Impacted teeth were classified according to their position before assessment. The adjacent second molars were assessed for distal caries, distal bone loss, and root resorption. The fourth finding was the presence of a retromolar canal distal to the impaction. Communication with the dentist responsible for each case was done to determine whether these findings were detected or undetected by them before communication. Results: Statistically significant correlations were found between impaction position, distal bone loss, and detected distal caries associated with the adjacent second molar. The greatest percentage of undetected findings was found in the evaluation of distal bone status, followed by missed detection of the retromolar canal. Conclusion: The radiographic assessment protocol for impacted third molars should consider a step-by-step evaluation for second molars, and clinicians should be aware of the high prevalence of second molar affection in horizontal and mesioangular impactions. They also should search for the retromolar canal due to its associated clinical considerations.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.165-181
• /
• 1999

Treatment mechanics should be individualized to be suitable for each patient's personal teeth and anatomic environment to get a best treatment result with the least harmful effects to teeth and surrounding tissues. Especially, the change of biomechanical reaction associated with that of the centers of resistance of teeth should be considered when crown-to-root ratio changed due to problematic root resorption and/or periodontal disease during adult orthodontic treatment. At the present study, in order to investigate patterns of initial displacements of anterior teeth under certain orthodontic force when crown-to-root ratio changed in not only normal periodontal condition but also abnormal periodontal and/or teeth condition, the changes of the centers of resistance for maxillary and mandibular 6 anterior teeth as a segment were studied using the laser reflection technique, the lever & pulley force applicator and the photodetector with these quantified variables reducing alveolar bone 2mm by 2mm for each of maxillary 6 anterior teeth until the total amount of 8mm and root 2mm by 2mm for each of mandibular 6 anterior ones until the total amount of 6mm. The results were as follows: 1. Under unreduced condition, the center of resistance during initial displacement of maxillary 6 anterior teeth was located at the point of about $42.4\%$ apically from cemento-enamel junction(CEJ) of the averaged tooth of them and kept shifting to about $76.7\%$ with alveolar bone reduction. 2. The distance from the averaged alveolar crest level of maxillary 6 anterior teeth to the center of resistance for the averaged tooth of them kept decreasing with alveolar bone reduction, but the ratio to length of the averaged root embedded in the alveolar bone was stable at around $33\%$ regardless of that. 3. Under unreduced condition, the center of resistance during initial displacement of mandibular 6 anterior teeth was located at the Point of about $43\%$ apically from CEJ of the averaged tooth of them and this ratio kept increasing to about $54\%$ with root reduction. But the distance from CEJ to the center of resistance decreased from around 5.3mm to around 3.3mm, that is to say, the center of resistance kept shifting toward CEJ with the shortening of root length. 4. A unit reduction of alveolar bone had greater effects on the change of the centers of resistance than that of root did during initial Phase of each reduction. But both of them had similar effects at the middle region of whole length of the averaged root.

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.153-171
• /
• 1999

The purpose of this study was to evaluate the effect of modified calcium sulfate paste on periodontal regeneration. l-wall intrabony defect(mesio-distal width: 4mm, depth: 4mm) was surgically created on the distal side of P2 and mesial side of p4 in four dogs. The control group(GFS) was treated with conventional flap operation alone, and the experimental group(CS) was treated with conventional flap operation with modified calcium sulfate paste application. Both control and experimental groups were sacrificed after 8weeks of healing period, The results of histological and histometric observations were as follows. 1. The length of the junctional epithelium was 0.41${\pm}$0.01mm in the control groups, 0.47${\pm}$0.01mm in the experimental group. 2. The connective tissue attachment was 0.28${\pm}$0.02mm(6.15${\pm}$0.28%) in the control group, 0.18${\pm}$0.01mm(3.41${\pm}$0.14%) in the experimental group. The control group showed more connective tissue attachment. 3. The new cementum formation was 3.80${\pm}$0.06mm(84.80${\pm}$0.33%) in the control group, 4.49${\pm}$0.06mm(87.57${\pm}$0.15%) in the experimental group. Both groups showed a lot of new cementum formation. 4. The new bone formation was 1.43${\pm}$0.03mm(32.37%) in the control group, 2.04${\pm}$O.09mm(40.94%) in the experimental group. 5. The inflamatory cells were observed partially around resorbed calcium sulfate in the connective tissue of the experimental group. 6. Partially resorbed calcium sulfate were found within the connective tissue, around alveolar bone, and in the newly formed alveolar bone, On the basis of these results, newly formed calcium sulfate paste enhanced new bone formation and new cementum formation. The resorption rate of calcium sulfate seems to be controlled by the add-in compounds. Thus research about biocompatibility and adequate resorptionrate is required to develop a improved material.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.465-470
• /
• 2003

Transverse and oblique crown-root fractures constitute a major therapeutic problem, particularly in young dentitions. Because crown-root fracture may involve enamel, dentin, pulp, and periodontal tissues, management of the injuries must be modified accordingly. When the fracture line was located under the alveolar crest. there are several methods for crown-root fractured teeth with pulp exposure, such as extruding the root fragment with orthodontic force and restoring it, or intentionally extracting the tooth and replanting it to a position which it can be restored. This case, the fractured tooth is intentionally extracted atraumatically, and replanted by rotating approximately 180 degree into the original socket and fixing with an orthodontic wire. At the 8-month recall examination, the root still showed normal mobility and there was not observed any inflammatory or replacement root resorption in the periapical radiograph.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.224-235
• /
• 1996

Early implantation before sufficient ossification has taken place usually results in osseointegartion failure due to reduced bone-fixture interface area. However, various studies have shown successful osseointegration results following immediate implants concurrently with GTR. The clinical trends have been to shorten the patients' edentulous state by immediate implantation, and reduce the alveolar bone resorption. However, it may be difficult to attain the complete soft tissue coverage of the sites, increasing the chance of infection. Furthermore, there may be more studies needed on the clinical behaviors of e-PTFE membranes, various modofications in the membrane materials and bone graft materials. Various animal and clinical studies have been reported on the successful osseointagration following immediate implantation, but the long-term follow-up studies are limited. The present study investigated 16 immediately-implanted implants with GTR therapy with or without calcium carbonate grafting on 11 patients 3 years after installation and 24-30 months after functional loading. Based on the clinical, radiographic and histologic findings, the following results have been attained. 1. Clinically, stability has been shown on all 16 implants throughout the investigated periods. 2. Radiologically, the alveolar bone loss has progressed up to the polished neck portion but not beyond it, suggesting the progressive osseointegration from the GTR therapy. 3. The GTR method used in the present study is easy to use clinically, and may be appied in the regeneration of ossoeous defects around implants and in the immediate implantation. 4. The difficulty in complete tissue coverage may be avoided by delaying the installation for 2 to 3 weeks after the extraction allowing certain degree of soft tissue healing.

• Journal of Periodontal and Implant Science
• /
• v.26 no.3
• /
• pp.591-604
• /
• 1996

The present study evaluates the effects of dura mater barrier membranes In class III furcation defects on the regeneration of periodontal tissues in dogs. Experimental class III furcation defects were created surgically by removing alveolar bone horizontally down to 4mm from CEJ in mandibular premolars of adult dogs. Dura mater barrier membranes were applied bucco-lingually in the test group, and flap surgery only with no membranes in the control group. The healing was evaluated clinically and histologically after 8weeks. Clinically, the test group showed slight exposures of the membranes, while the control group showed no furcation exposure, The test specimens showed new bone formation coronal to the notch, while the control specimens had new bone formation up to the level of the notch. New cementum was observed in both groups. The test specimens showed functional arrangements of connective tissue fibers between new bone and new cenentum, while irregular arrangements were observed in the controls. No root resorption or ankylosis were observed in either groups,These results suggest that dura mater resorbable barrier membranes on class III furcation defects may be effective in regeneration of alveolar bone and peridontal ligament.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.196-207
• /
• 2018

An accurate implant placement with ideal location is significant for long-term success of the implant. An exact evaluation of nearby anatomic structures such as quality of residual bone, an inferior alveolar bone and a maxillary sinus is required. For a prosthetic-driven treatment, planned surgery, precise prosthesis and communication with the patient are significant requisites especially for full-mouth rehabilitation. In this case, the patient with severe alveolar bone resorption had a CT guided surgery supported by CT data and the data from scanning diagnostic wax-up. Afterward, edentulous area was restored by full mouth implant-supported prosthesis by using monolithic zirconia and CAD/CAM technique. This paper reports the outcome of the procedure which was remarkable both esthetically and functionally.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.5
• /
• pp.361-371
• /
• 2014

PURPOSE. In case of large horizontal discrepancy of alveolar ridge due to severe resorption, cantilevered crown is usually an unavoidable treatment modality. The purpose of this study was to evaluate the clinical criteria for the placement of the aforementioned implant crown. MATERIALS AND METHODS. The mandible model with 2 mm thick cortical bone and cancellous bone was fabricated from CT cross-section image. An external connection type implant was installed and cantilevered crowns with increasing offset of 3, 4, 5, 6, and 7 mm were connected. Vertical load and $30^{\circ}$ oblique load of 300 N was applied and stress around bone and implant component was analyzed. A total of 14 cases were modeled and finite element analysis was performed using COSMOS Works (Solid works Inc, USA). RESULTS. As for the location of the vertical load, the maximum stress generated on the lingual side of the implant became larger according to the increase of offset distance. When the oblique load was applied at $30^{\circ}$, the maximum stress was generated on the buccal side and its magnitude gradually decreased as the distance of the offset load increased to 5 mm. After that point, the magnitude of implant component's stress increased gradually. CONCLUSION. The results of this study suggest that for the patient with atrophied alveolar ridge following the loss of molar teeth, von-Mises stress on implant components was the lowest under the $30^{\circ}$ oblique load at the 5 mm offset point. Further studies for the various crown height and numbers of occusal points are needed to generalize the conclusion of present study.