• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.161-165
• /
• 2011

PURPOSE. This randomized clinical trial was conducted to assess the safety and effectiveness of the ErhBMP-2 in alveolar bone regeneration as well as preservation of the ${\beta}$-TCP bone graft material that contains ErhBMP-2. MATERIALS AND METHODS. This study involved 72 patients at the 3 study centers. The patients, who were divided into 2 groups: the experiment group who had ErhBMP-2 coated TCP/HA and the control group who had TCP/HA graft material alone transplanted immediately after tooth extraction. CT was taken before and 3 months after the transplantation and healing status was compared between the two groups. The efficacy endpoints that were used to measure the degree of bone induction included alveolar bone height and 3 measurements of bone width. The paired t test was used to determine the significance of the changes (P<.05). RESULTS. Changes in alveolar bone height were $-1.087{\pm}1.413$ mm in the control group and $-.059{\pm}0.960$ mm in the experimental group (P<.01). At 25% extraction socket length [ESL], the changes were $0.006{\pm}1.149$ mm in the control group and $1.279{\pm}1.387$ mm in the experimental group. At 50% ESL, the changes were $0.542{\pm}1.157$ mm and $1.239{\pm}1.249$ mm, respectively (P<.01 for 25% ESL, and P<.05 for 50% ESL). During the experiment, no adverse reactions to the graft material were observed. CONCLUSION. ErhBMP-2 coated ${\beta}$-TCP/HA were found to be more effective in preserving alveolar bone than conventional ${\beta}$-TCP/HA alloplastic bone graft materials.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권1호
• /
• pp.83-85
• /
• 2000

The purpose of this study is to evaluate the effect of $HTR^{TM}$ (hard tissue replacement, Bioplant Inc, U.S.A) polymer on short-term healing as a grafting material for alveolar ridge augmentation. A 48-year-old female presented insufficient bone height and width for the placement of implants. $HTR^{TM}$ polymer was used for ridge augmentation. Bone biopsy was harvested 8 months after the ridge augmentation procedure. $HTR^{TM}$ polymer displayed rapid bone regeneration and mature lamellar and trabecular bone redevelopment. Clinical and histologic observation from the treatment of the patient presented suggest that $HTR^{TM}$ polymer seems to be a appropriate material for alveolar ridge augmentation.

• Journal of Periodontal and Implant Science
• /
• 제40권5호
• /
• pp.227-231
• /
• 2010

Purpose: The healing process following tooth extraction apparently results in a pronounced resorption of the alveolar ridge. As a result, the width of alveolar ridge is reduced and severe alveolar bone resorption occurs. The purpose of this experiment is to clinically and histologically evaluate the results of using horse-derived bone mineral for socket preservation. Methods: The study comprised 4 patients who were scheduled for extraction as a consequence of severe chronic periodontitis or apical lesion. The extraction was followed by socket preservation using horse-derived bone minerals. Clinical parameters included buccal-palatal width, mid-buccal crest height, and mid-palatal crest height. A histologic examination was conducted. Results: The surgical sites healed uneventfully. The mean ridge width was $7.75{\pm}2.75\;mm$ at baseline and $7.00{\pm}2.45\;mm$ at 6 months. The ridge width exhibited no significant difference between baseline and 6 months. The mean buccal crest height at baseline was $7.5{\pm}5.20\;mm$, and at 6 months, $3.50{\pm}0.58\;mm$. The mean palatal crest height at baseline was $7.75{\pm}3.10\;mm$, and at 6 months, $5.00{\pm}0.82\;mm$. There were no significant differences between baseline and 6 months regarding buccal and palatal crest heights. The amount of newly formed bone was $9.88{\pm}2.90%$, the amount of graft particles was $42.62{\pm}6.57%$, and the amount of soft tissue was $47.50{\pm}9.28%$. Conclusions: Socket preservation using horse-derived bone mineral can effectively maintain ridge dimensions following tooth extraction and can promote new bone formation through osteoconductive activities.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권2호
• /
• pp.107-114
• /
• 2001

Objectives : To compare jaw bone density of young adults (control group) and post-menopausal women(experimental group) in periapical and panoramic film. Materials and Methods : The bone mineral density values of lumbar and femur were measured by dual-energy X-ray absorptiometry(DEXA) and T scores of lumbar were obtained. T scores were classified into 3 group (T<-2.5, $-2.5{\leqq}T<-1$, $-1{\leqq}T$). Radiographic densities of alveolar bones were measured from interdental bones of premolar, molar areas in the maxilla and mandible and expressed into copper step wedge thickness by Scion $Image^{(R)}$ program. We considered these values of step wedge thickness as bone density of alveolar bone. Panorama mandibular index(PMI) was calculated by the method that the height of the inferior cortex of the mandible was divided by the height from the lower border of the mandible to the superior edge of the mental foramen. Bone density of alveolar bone and PMI were analysed statistically. Results : There were significant differences in bone mineral density of lumbar and femoral neck between control and experimental groups. There were also significant differences in bone density of premolar and molar area of jaw between control and experimental groups by MANOVA test. When considered lumbar T variables, there was only difference in interdental bone density of maxillary molar area between control and experimental group, but there was interaction. Interdental bone density of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. There was significant difference in PMI between control and experimental groups, but there was also inter action, thus, PMI of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. Conclusion : There were significant differences of alveolar density and cortical bone thickness between young men and post-menopausal women in periapical and panoramic film. These differences were dependent on lumbar T.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권3호
• /
• pp.238-244
• /
• 2000

The present study was aimed to investigate the effect of osseointegration according to implant placement timing in the distracted alveolar bone using intraoral distraction device. Six adult mongrel dogs of either sex, weighing about 15kg, were used. The animals were divided into 4-week and 8-week groups according to the timing of implant installation. The left upper and lower premolars and first molars were extracted and an alveoloplasty was performed to simulate an atrophic ridge. After 12 weeks of healing, a segmental osteotomy was made and an intraoral distraction device which was designed for augmentation of vertical height of the edentulous ridge was applied. Latency period was allowed for 5 days and then distraction was made at a rate of 1.2mm/day for 8 days. Four or eight weeks after distraction, implants were installed. Twelve weeks after implant installation, the animals were sacrificed. Macroscopic, radiographic, and histologic examinations of distracted alveolar ridge were performed. No significant abnormalities such as infection and dehiscence of overlying soft tissue were observed. Radiographically, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in the both groups. The satisfactory osseointegration was achieved in the distracted gap of the both groups, but fibrous tissue appeared on the buccal side of implant in the distracted gap in 4-week group. These results suggest that proper timing of implant installation is 8 weeks rather than 4 weeks after distraction when dental implant is to be placed onto the distracted bone.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.511-514
• /
• 1997

The objective of this study is to propose a finite element based design of the dental implant replacing unction and shape of natural teeth. For this, geometric actors were varied to investigate stress distribution of the alveolar bone around dental implant. In this study, the results were obtained based on the theory of linear elastic, with geometrically axisymmetric assumption. Geometric actors determining implant shape are ranged as 0.2mm-0.6mm, 0.04mm-0.1mm, 0.46mm-0.84mm or height of thread, radius of curvature of thread, and pitch, respectively. The stresses in the alveolar bone caused by biting force playa major role in determining implant stability. Especially, the stress concentration in the cortical bone causes bone resorption and finally makes the implant unstable. Therefore, the stress distributions were investigated on the side of the alveolar bone focusing on the area of cortical bone. The maximum von Mises stress was found to increase up to 6% as the height of thread increases, while its value was to decrease to 19% when the radius of curvature increase within the assigned ranges. For the variation of pitch, the larger size of pitch results in greater maximum von Mises stress when the length of the implant under consideration is fixed. The existence of the neck below the shoulder did not affect the stress distribution in the region of alveolar bone. However, the stresses on the side of the implant near the neck were found to be different by 20% approximately. Therefore, the neck can provide the stability of the implant against continuing biting movement. As a conclusion, the finite element based study shows a potential in designing the dental implant systematically.

• 대한치과교정학회지
• /
• 제46권5호
• /
• pp.310-322
• /
• 2016

Objective: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권1호
• /
• pp.28-39
• /
• 2007

The purpose of this study is to evaluate the regenerative capacity of reconstruction in the atrophied posterior maxilla by comparing bone graft procedures and alveolar distraction osteogenesis (ADO) techniques. We performed the autogenous iliac bone graft (AGB group, 5 specimens in 3 patients), and the combination (Mixed group, 3 specimens in 3 patients) of the autogenous and deproteinized bovine bone ($Bio-Oss^{(R)}$, Geistlich Co., Switzerland) as the ratio of 2:1 in the sinus floor elevation procedures. ADO procedures using $TRACK^{(R)}$ (KLS Martin Co., Germany) were also performed to augment vertical alveolar height in atrophied posterior maxilla (ADO group, 5 specimens in 4 patients). Newly generated bone tissues were obtained with the 2.0mm diameter trephine bur (3i Co., USA) during implant fixture installation after 5-7 months. Routine histolomorphological observation, immunodot blot assay for quantitative evaluation, and immunohistochemical staining with antibodies to MMP-1, -9, -10, TIMP-1, -2, and BMP-2, -4 were all carried out. Lamellar bone formation was well shown in all specimens and new bone formations of ADO group increased than those of other procedures. In immunohistochemical staining, the strong expression of BMP-2 was shown in all specimens, and immunodot blot assay showed that bone formation is accompanied by the good induction of factors associated with angiogenesis and appeared more increased amount of osteogenic and angiogenic factors in ADO group. ADO is the most effective technique for new bone formation compared to sinus floor elevation with autogenous or mixed bone graft in the atrophied posterior maxilla. In the quantitative immunodot blot assay, the regenerated bone after ADO showed more increased products of VEGF, BMP-2, PCNA and MMP-1 than those after the other procedures, and these findings were able to be confirmed by immunohistochemical stainings.

• Journal of Periodontal and Implant Science
• /
• 제33권3호
• /
• pp.533-542
• /
• 2003

The purpose of this study is to evaluate histologic result of bone substituting material on defects followed tooth extraction. We compare the histologic findings control, DFDBA, Bio-Oss(R), and $Regenafil^{TM}$, Briefly, mandibular premolar teeth were extracted available for bone filling. All alveolar sites were checked after extraction and thoroughly debrided with a dental curet to remove the periodontal ligament. Extraction sites were prepared dehiscence on buccal side 7mm height from alveolar crest. The graft materials were filled into the extraction socket and dehiscenc defects. The animals were sacrificed 12 weeks after implantation. Both treated and control mandibular sites were histologically evaluated with light microscopy. Histologic observation at 12 weeks revealed that control and experimental sites were healed uneventfully and directly apposed to new bone without any adverse tissue reaction. DFDBA and Bio-Ossn(R)sites maintain width of alveolar crest but were not fully resorbed. $Regenafil^{TM}$ sites also maintain width and particles were resorbed more than other graft materials. From this results, it was suggested that $Regenafil^{TM}$ is promising boen substituting materials maintaining the width of alveolar crest and height follewed tooth extraction.

• Journal of Periodontal and Implant Science
• /
• 제32권2호
• /
• pp.379-388
• /
• 2002

임플랜트의 성공을 위해서 정확한 방사선학적 검사는 가용골의 높이와 하악관의 위치를 평가하고 중요구조물의 손상을 방지하는데 있어 필수적이다. CT촬영법 중 영상재구성법을 이용한 방법(CT/MPR)은 하악관의 위치를 잘 보여준다. 치아에 평행한 협설 단면 (cross-sectional plane)을 얻기 위해서는 횡단면(axial plane)이 교합면과 평행하도록 해야 한다. 횡단면(axial plane)이 교합면과 평행하지 않으면 재구성된 협설 단면(cross-sectional plane)은 계획된 fixture의 방향과 각을 이루게 되어 그 fixture의 실제 dimension을 보여주지 못하게 된다. 협설단면(cross-sectional view)에서 측정한 가용골 높이가 실제 가용골 높이보다 너무 큰 경우, 수술시 하악관을 침범할 가능성이 있게 된다. 이 연구의 목적은 하악 임플랜트 CT 촬영시 횡단면이 임플란트를 위한 가용골 높이의 측정에 미치는 영향을 알아보는 것이다. 하악 대구치 부위의 임플랜트를 계획하고 radiographic stent를 만든 후 치과 방사사선과에서 하악 임플랜트 CT를 촬영한 40명의 환자, 45개 부위를 선택하였다. 임플랜트 CT의 central panoramic view에서 치조정과 하악관, stent를 tracing한 후, 치조정과 하악관간의 거리(available bone height, ABH)를 재구성된 협설단면상에서 측정하였다(uncorrected ABH). 다음으로, .stent 방향으로 그은 직선상에서 측정하였다(corrected ABH). 두 거리사이의 각을 측정하였다. 두 거리로부터 각각 fixture의 길이를 결정하였다. 연구 결과, 두 가용골의 높이간에는 제 1 대구치와 제 2 대구치에서 모두 유의성있는 차이를 보였다 (p<0.001). 차이가 1 mm 이상인 경우는 제 1 대구치에서 8.7%, 제 2 대구치에서 15.5% 였다. 차이가 2 mm 이상인 경우는 제 1 대구치에서 2.0%, 제 2 대구치에서 6.6%였다. 최대값은 제 1 대구치에서 2.5 mm, 제 2 대구치에서 2.2 mm 였다. 두 가용골의 높이차와 각과의 상관 관계는 제 1 대구치와 제 2 대구치에서 모두 양의 상관관계를 보였다. 상관 계수는 제 1 대구치에서 0.534, 제 2 대구치에서 0.728 였다. 제 2 대구치가 더 강한 양의 상관관계를 보였다. 두 가용골의 높이로부터 결정한 fixture의 길이가 일치하지 않는 경우는 제 1 대구치에서는 24.4%, 제 2 대구치에서는 28.9%였다.