• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.127-140
• /
• 1994

Resistance spot welding has been widely used in the sheet metal joining processes because of its high productivity and convenience. In the resistance spot welding processes the size of molten nugget is a criterion to assess weld quality. Many research have founded on measuring weld nugget size at the same time monitoring welding process parameters such as dynamic resistance and electrode movement. With increasing demand of energy saving, many efforts were made to employ aluminum alloys that are lighter than steel and have relatively equivalent strength to steel in the automobile industry. In this paper, spot weldability of aluminum alloys for various welding conditions were examined by series of experiments. One of the 6000 series (Mg-Si) aluminum alloy, 6383-T4 was chosen, which is currently considered as a substitute for the galvanized steel. Dynamic resistance, electrode movement and corresponding nugget size were observed and compared to the case of steel. Finally, resistance spot welding of dissimilar material (galvanized steel-aluminum alloy) was attempted.

• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.117-126
• /
• 1994

APAL (Aramid Patched ALuminum alloy) was manufactured, which was a material that was consisting of a A12024-T3 aluminum alloy plate bonded to single-side of it with aramid/epoxy laminates. The aramid/epoxy laminates were bonded to it in condition of 1, 2 ply and fiber orientation of .+-.45, 0.deg./90.deg. Fatigue crack propagation tests were performed at stress ratio R-0.2, 0.5 with Al 2024-T3, APAL 45-1P, APAL 0/90-1P, APAL 45-2P, APAL 0/90-2P specimens to examine behavior of retardation in fatigue crack propagation. All the APAL specimens showed superior fatigue crack resistance. Number of cycle spended for crack to propagate from $a_{M}$=37 to $a_{M}$=65 mm in case of APAL 0/90-2P specimen was half that of Al 2024-T3 specimen. Fatigue crack propagation rate of APAL 0/90 specimens were retarded more compared to APAL 45 specimens and the amounts of retardation at R=0.5 were larger than that at R=0.2. It was found that the retardation in fatigue crack propagation was caused by intact fibers in the wake of crack.ack.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.677-681
• /
• 2015

$NaBH_4$ 가수 분해용 경량반응기의 재질로서 알루미늄 합금을 검토하였다. 알루미늄은 알칼리에 용해되는데, $NaBH_4$ 반응 용액중에 안정화제로 NaOH가 포함되어 있다. 알루미늄의 부식 속도를 낮추기 위해서 NaOH 농도를 낮추면 저장중에 $NaBH_4$가 손실된다. 그래서 최적의 NaOH 농도를 결정할 때 알루미늄 부식과 $NaBH_4$ 안정화를 모두 고려해야 한다. $NaBH_4$ 안정화와 알루미늄 부식속도는 수소발생속도에 의해 측정하였다. $NaBH_4$ 안정화는 $20{\sim}50^{\circ}C$에서 알루미늄 부식속도는 $60{\sim}90^{\circ}C$ 온도에서 실험하였다. 알루미늄 부식과 $NaBH_4$ 안정화를 모두 고려한 최적의 NaOH농도는 0.30 wt% 였다. 알루미늄 합금 6061를 사용해 반응기 온도 $80{\sim}90^{\circ}C$에서 NaOH 0.3 wt%로 200분간 반응을 진행하였다.