최근, 하 폐수 처리에 있어서 처리수의 보다 나은 수질과 엄격한 기준의 만족을 위해 기존의 공정외에 덧붙여 막분리 공정이 이용되고 있다. 그러나, 수처리 과정에서 막분리 공정의 사용은 막의 막힘 현상과 용존 유기오염물 제거의 어려움 등의 문제점이 있다. 본 연구에서는 막분리 공정에 응집제 alum과 PAC을 이용한 응집공정을 첨가하여 막 투과유속과 처리효율을 증가시켰다. 그리고 응집제 주입효과와 최적운전조건은 투과유속, 누적부피, 막의 총저항, 입자크기, 용존성 유기오염물, 용존성 알루미늄, 처리수의 수질을 분석하여 연구하였다. alum 응집에 비교해 PAC 응집은 큰 입자를 형성하여 여과 매체의 막힘현상을 줄이고 높은 투과유속과 누적 부피량을 보였다. 또한 PAC 응집에서 낮은 용존 유기오염물과 용존성 알루미늄은 투과유속 감소율을 낮추었다. $0.2\;{\mu}m$ 막 사용시 케이크여과의 모습을 보였으며, $0.45\;{\mu}m$ 막 사용시 순환운전으로 인한 플럭 깨짐 현상으로 공극보다 작은 플럭의 투과가 발생하여 투과유속이 계속 감소하고 막의 총저항이 증가하는 모습을 보였다. PAC과 alum 모두 약 $300{\pm}50\;mg/L$가 최적 응집주입량이었으며, PAC 응집과 $0.2\;{\mu}m$ 막 사용시 처리 효율이 가장 높고, $0.45\;{\mu}m$ 막 사용시 투과수량이 가장 많았다. 처리 효율은 탁도 99.8%, SS 99.9%, $BOD_5$ 94.4%, $COD_{Cr}$ 95.4%, T-N 54.3%, T-P 99.8%이었다.
7050 AI합금을 RRA 처리하였을 때 경도, 전기전도도 및 미세조직의 변화를 조사하였다. 120도씨에서 24시간 동안 1차 시효처리한 후 175도씨에서 2차 퇴화처리하였을 때 경도값의 변화는 초기에 감소하다가 피크 경도를 보인 다음 다시 감소하였으며, 3차 재시효처리재가 2차 시효처리재 보다 큰 경도값을 나타내었다. 2차 퇴화처리시 초기 경도 감소는 T6의 주 강화상인 GP zone의 부분적인 분해에 의한 것이며, 3차 재시효 처리하였을 때 강화상은 GP zone과 파이상이었다. 120도씨에서 24시간 동안 1차 시효처리한 후 175도씨에서 2차 퇴화처리하였을 때 전기전도도 변화는 퇴화 쵤부터 연속적으로 증가혀였으며, 3차 재시효처리에 의해 2차 퇴화처리시 보다 %IACS가 0.5 ~ 2.7 증가하였다. 3단시효에 의해 T6정도의 강도를 유지하면서 38%IACS값 이상의 전기전도도를 얻을 수 있는 최적 퇴화처리 조건은 $175^{\circ}C$ 50분이었다. 이는 퇴화처리 경도곡선의 극소점 또는 극대점과 무관하며 오히려 약간 과시효 조건이다.
;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.
구조물의 주요 부재들은 임의의 부분에 과대 하중이 작용하거나 반복 하중을 받아서 재료가 열화되면 균열이 발생한다. 이러한 균열은 구조물의 안전성을 평가할 수 있는 중요한 인자이며 균열의 진전 여부가 구조물의 안전성을 평가하기 위한 중요한 지표로 사용할 수 있다. 따라서 본 연구에서는 구조물의 기존 균열이 진전하는지를 감시하기 위하여 광섬유 브래그 격자 센서를 개발하였다. 이 센서 시스템은 탐촉자, 파장제어 광원부 및 광수신부, 그리고 가진부로 구성된다. 센서 탐촉자 부분은 광섬유 브래그 격자 소자만으로 구성된다. 파장제어 광원부는 전류공급회로와 DFB(distributed feedback) 레이저 다이오드로 구성되고 파장 제어 회로는 레이저 다이오드의 온도를 바꾸어 파장을 제어한다. 또한 가진부는 강체 낙하구에 의하여 구현한다. 이렇게 구성된 센서의 성능은 알루미늄판에 임의의 균열을 만들고 센서를 작동시키면서 출력 신호를 검토하면서 확인하였다. 광섬유 브래그 격자 센서의 출력 신호의 변화는 균열 길이 변화에 따라서 크게 변화되어 나타나므로 균열 진전 탐지 가능성이 충분함을 확인할 수 있었다.
저온 분사된 입자와 섬유강화 복합재료 사이의 접착력을 향상시키기 위해 금속 메쉬와 금속 입자/에폭시 접착제가 조합된 중간층이 도입되었다. 저온 분사 입자 및 금속 메쉬 그리고 금속 입자에는 모두 알루미늄을 활용하였다. 높은 변형률 속도에서 중간 층의 응력을 예측하기 위해서는 접착제 물성의 측정 또는 계산이 필요하다. 따라서, 본 연구에서는 금속 입자/에폭시 접착제의 물성을 계산하기 위해 혼합법칙(Rule of mixture)을 활용한 균질화 기법의 연구를 진행하였다. 균질화 기법의 검증을 위해 금속 메쉬/접착제로 구성된 중간층에 알루미늄 입자를 활용한 저온 분사를 진행하여, 실험으로 측정된 입자의 침투 깊이를 유한요소 해석에서 계산된 입자의 침투 깊이와 비교하였다. 시험과 해석에서 저온 분사 입자 혹은 중간층에 도입된 입자 하나 수준 크기의 침투 결과를 확인하였고, 이를 통해 높은 변형률 속도를 갖는 입자강화 복합재료 층의 물성 예측에 있어 균질화 기법이 적용될 수 있는 가능성을 확인하였다.
Objective : The study's objective is to assess the components of Dendropanax morbifera (DM) utilizing UPLC-MS/MS and assess their antioxidant properties in order to establish fundamental information for quality control of herbal formulations. Methods : The DM leaves were ground into powder and extracted with water at 80℃. The extract was subsequently concentrated and subjected to freeze-drying for subsequent analysis. The LC-MS/MS analysis was performed using a 1260 series HPLC system and a 3200 QTrap tandem mass system in positive ion mode, with detection conducted at 280 nm. The Folin-Ciocalteu method was employed to measure the phenolic content, while a colorimetric method using aluminum chloride was used to determine the flavonoid content, with gallic acid and quercetin as standards, respectively. The evaluation of antioxidant activity was conducted through the measurement of DPPH radical scavenging activity, by adding the DPPH solution to the extract and recording the absorbance at 517 nm. Results : The UPLC-MS/MS analysis identified five polyphenolic compounds in the DM extract, specifically syringin, 6-hydroxyluteolin 7-O-laminaribioside, shaftoside, rutin, and kaempferol-3-O-rutinoside. The extract was found to contain a total phenolic content of 83.106 ± 0.21 mg GAE/g and a total flavonoid content of 87.963 ± 1.014 mg QE/g. The DM extract demonstrated substantial antioxidant properties, resulting in a reduction of DPPH radicals that was evident at concentrations as low as 40 ㎍/㎖. Conclusions : The study determined important polyphenolic compounds in DM and established its considerable antioxidant efficacy. These findings provide evidence for the efficacy of DM in disease prevention related to oxidative stress and establish a foundation for ensuring quality control in herbal preparations.
본고의 목적은 SF영화 <스타트랙> 시리즈에 나타난 시간여행의 모티프가 서사적 측면과 비서사적 측면에서 하고 있는 기능에 대해 고찰함으로써 SF서사에서 이 모티프가 계속 반복되는 이유를 밝히는 데 있다. <스타트랙 IV: 시간 초월의 항해>(1986)는 실제로 사용되는 항법인 슬링샷으로 태양 주위를 돌파하여 그럴듯하게 시간여행을 하는 것과 당시에는 없던 투명 알루미늄의 제작 공식을 알려줘 역사에 변화를 가져오는 예정 역설을 불러오는 것을 통해 이야기에 대한 관객의 흥미를 끌고자 한다. 또한 이 영화는 혹등고래를 중심 서사에 포함시켜 고래 보호운동이라는 당대의 현실적 문제에 부응함으로써 생태주의라는 이데올로기를 환기시키는 기능을 한다. <스타트랙 VIII: 퍼스트 콘택트>(1996)는 빛보다 빠른 속도로의 비행을 가능하게 해주는 가상의 장치로 스타트랙을 대표하는 기술인 워프 드라이브를 시간여행을 통해 그 탄생 시점에서 다룸으로써 서사에 흥미를 더하고자 한다. 그리고 영화는 핵전쟁이 가져올 수 있는 인류의 멸망을 경고하여 평화적 노력을 계속할 것을 역설하고, 외계와의 조우로 행성연방의 창설을 예고하여 현실 세계에서의 국가 간 협력의 중요성을 강조함으로써 평화주의와 이상주의의 시각을 드러낸다. <스타트랙: 더 비기닝>(2009)은 블랙홀에 의한 과거로의 시간 여행과 그로 인해 생성된 평행우주라는 시간여행 서사 요소를 통해 흥미를 높이는데, 특히 후자는 그동안 전개된 이야기를 그대로 유지하면서 자유롭게 새로운 시간선의 이야기를 창조하도록 해주는 리부트 기능을 한다. 더불어 이 영화는 스팍(과 연방함대)과 네로의 대립, 벌컨 행성과 로물루스 행성의 파괴, 인간과 벌컨족의 협력을 통해 1996년 영화에서 보여주었던 평화주의와 이상주의를 반복한다. 결국 세 편의 <스타트랙> 영화에서 시간여행은 서사적 측면에서 이야기에 대한 관객의 흥미를 최대한으로 끌어올리고 서사를 자유롭게 전개하게 해주는 기능을 함과 동시에 비서사적 측면에서 현재의 문제에 대해 논평하고 이상적인 해결 방안을 제시하는 기능을 한다고 할 수 있다. 본고의 의의는 위와 같은 시간여행의 기능으로 볼 때 SF서사에서 시간여행의 모티프가 앞으로도 계속해서 반복되면서 진화할 것이라는 예상을 가능하게 한 데 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.