• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.171-180
• /
• 2005

Bending performances of aluminum square tube beams reinforced by aluminum plates under three point bending loads have been evaluated using experimental tests combined with theoretical and finite element analyses. A finite element simulation for the three-point bending test was performed. Basic properties of aluminum materials used for initial input data of the finite element simulation were obtained from the true stress-true strain curves of specimens which had been extracted from the Al tube beams. True stresses were determined from applied loads and cross-sectional area records of a tensile specimen with a rectangular cross-section by real-time photographing, and true strains were obtained from in-situ local elongation measurements of the specimen gage portion by the multi-point scanning laser extensometer. Six kinds of aluminum tube beam specimens adhered by aluminum plates were employed fur the bending test. The bending deformation behaviors up to the maximum load described by the numerical simulation were in good agreement with experimental ones. After passing the maximum load, reinforcing plate was debonded from the aluminum tube beam. An aluminum tube beam strengthened by aluminum plate on the upper web showed an excellent bending capability.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.60-65
• /
• 2007

Local buckling behaviors of aluminum square tube beams reinforced by aluminum plates under three point bending loads have been analyzed using experimental tests combined with theoretical and finite element analyses. For this analysis true stresses were determined from applied loads and cross-sectional area records of a tensile specimen with a rectangular cross-section by real-time photographing. True strains were also obtained from in-situ local elongation measurements of the specimen gage portion by the multi-point scanning laser extensometer. Six kinds of aluminum tube beam specimens reinforced by aluminum plates were employed for the bending test. The bending deformation behaviors up to the maximum load analyzed by the numerical simulation agreed well with experimental ones. After passing the maximum load, reinforcing plate hindering the local buckling of the tube beam was debonded from the aluminum tube beam. An aluminum tube beam strengthened by aluminum plate on the upper web showed the most excellent bending capacity, which could be explained on the basis of the neutral axis shift and the local buckling deformation range.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.429-434
• /
• 2012

금속 연료로 사용되는 마이크로/나노 알루미늄 입자를 산화피막에 의한 점화 지연을 최소화 하는 점화 방법을 제시 하였다. 알루미늄 입자를 생성시킴과 동시에 가열하여 입자가 생성된 직후 산소와 접촉시 격렬한 산화 반응을 유도하여 점화를 시키는 방법이다. 1064 nm 파장의 Nd:YAG 펄스 레이저를 이용한 레이저 삭마(laser ablation)를 알루미늄 시편에 발생시켜 입자를 생성하였으며, 산란 기법(scattering method)을 이용하여 입자를 가시화하여 생성을 확인하였다. 10.6 ${\mu}m$ 파장의 $CO_2$ 연속 레이저를 사용하여 알루미늄 시편을 가열하고 생성된 입자의 점화 열원으로 사용하여 알루미늄 입자가 점화되고 연소되어 이동하는 궤적을 확인하였다.

• 한국추진공학회지
• /
• 제22권6호
• /
• pp.134-141
• /
• 2018

본 연구에서는 MDF(Mild-detonating Fuse)를 이용한 선형분리장치 개발 가능성을 확인하기 위해 기초 연구를 수행하였다. 지름이 작은 금속(납) 튜브 내부에 화약(RDX)이 충전되어 있는 MDF를 활용한 알루미늄 평판 절개 기초 시험을 수행하였다. 평판의 두께와 MDF의 단위 길이당 화약량을 조절해가며 시험을 수행하였으며, 평판 두께와 화약량에 따른 절개 여부를 확인하였다. 시험 결과를 바탕으로 AUTODYN 기반의 수치 해석 모델을 개발하였으며, 정확한 파괴 조건을 결정하였다. 시험 및 해석 결과 분석을 통해 MDF의 알루미늄 평판 절개 메커니즘과 특성을 확인하였으며, 체계 적용 가능성을 확인하였다. 개발된 해석 기법을 활용하면 다양한 MDF 및 구조물에 대한 절개 가능 여부를 미리 확인하여 개발 과정에서의 시험 비용을 최소화 할 수 있다.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.666-671
• /
• 2018

허니콤 판재(honeycomb panel)는 벌집 모양의 코어(core) 양쪽면에 표면판재를 부착시켜 만든 판재이다. 허니콤 판재는 비강도가 뛰어나며, 재료에 압축하중이 가해졌을 때 재료가 수차례의 좌굴을 반복하기 때문에 에너지 흡수성이 우수하여 내충격성이 요구되는 부위에 사용하기에 적합하다. 특히 최근에는 수송기기의 경량화에 대한 요구가 증가함에 따라 알루미늄 허니콤 판재를 자동차 및 고속전철 등의 차체 재료로 이용하려는 연구가 진행되고 있다. 이 밖에도 허니콤 판재는 흡음성과 평활성이 우수하며, 단열성과 내피로성도 우수하다. 연료 경제성을 증가시키기 위하여 알루미늄 합금 소재와 같은 경량 소재를 허니콤 판재 주 재료로 사용하여 무게를 감량시키는 것에 관한 연구를 진행 하였다.본 연구에서는 허니콤 판재의 설계기술, 알루미늄 허니콤 코어 및 허니콤 판재 제조 기술에 대한 연구를 수행하였으며, 또한 제조된 허니콤 판재의 각종 기계적 특성평가를 행하여 그 결과를 바탕으로 알루미늄 허니콤 판재의 제조 공정 설계, 판재 제작 및 특성 평가방안을 마련하였다. 연구결과 허니콤 판재의 우수한 에너지 흡수성은 코어 버클링의 반복에 기인하며 압축강도가 높을수록 접합면적당 강도 또한 높은 값을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.239-240
• /
• 2011

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.243-248
• /
• 2001

The objective of this study is to investigate the thermal conductivity of cement mortar for apartment housing floor using expansive admixture, copper fiber, cower lathe, hollowed aluminum plate. According to test results, temperature at point (a) located above heating pipe does not show significant variation with age, and temperature at (b), which is located at the finishing surface above heating pipe, and temperature at (c), which is located at center surface between heating pipe has remarkable change. Temperature distribution sat (b) are in order for, structure containing copper fiber>plain structure>structure containing hollowed aluminum plate>structure containing expansive admixture. Temperature distribution, shows high tendency in order for, structure containing copper fiber>structure containing copper lathe>structure containing hollowed aluminum plate>plain structure>structure containing expansive admixture. (a) estimation of temperature distribution is determined with the variation of temperature between (b) point and (c) point during 60 minutes heating.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.89-94
• /
• 2000

Because the structural elements used in the automobile, astronautic and ship industries are put in dynamic loading environments, much interest is given to the damping of the structural elements, as well as high flexural rigidity and strength per density. Therefore, in this study, the structural damping value of the aluminum honeycomb sandwich plate(AHCP) has been experimentally extracted, and directly applied to the finite element, for the dynamic analysis of the plate considering the structural damping. The analysis results of this theory was compared with the results of the actual modal analysis method. It was observable that the two analyses concurred, establishing the structural damping and analysis method of the AHSP.

• Coupled systems mechanics
• /
• 제13권2호
• /
• pp.133-151
• /
• 2024

In this paper, an improved theoretical interfacial stress analysis is presented for simply supported composite aluminum- sandwich honeycomb beam strengthened by imperfect FGM plateusing linear elastic theory. The adherend shear deformations have been included in the present theoretical analyses by assuming a linear shear stress through the thickness of the adherends, while all existing solutions neglect this effect. Remarkable effect of shear deformations of adherends has been noted in the results.It is shown that both the sliding and the shear stress at the interface are influenced by the material and geometry parameters of the composite beam. This new solution is intended for applicationto composite beams made of all kinds of materials bonded with a thin plate. Finally, numerical comparisons between the existing solutions and the present new solution enable a clear appreciation of the effects of various parameters.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.41-47
• /
• 2023

This paper presents the development of a controller that can control the temperature of an heating system based on a thermoelectric module. Temperature controller using Peltier has various external factors such as external temperature, characteristics of an aluminum plate, installation location of temperature sensors, and combination method between the aluminum plate and heating element. Therefore, it is difficult to apply the simulation and simulation results of heating system using Peltier at control algorithm. In general, almost temperature controller is using PID algorithm that finds control gain value heuristically. In this paper, it is proposed mathematical model that explain correlate between the temperature of the heating system and input voltage. And then, optimal parameter of estimated thermal model of the aluminum plate are searched by using genetic algorithm. In addition, based on this estimated model, the optimal PID control gain are inferred using a genetic algorithm. All of the sequence are simulated and verified with proposed real system.