• 한국분말재료학회지
• /
• 제10권6호
• /
• pp.415-421
• /
• 2003

The study for producing the flake powders by milling of aluminum foil and gas atomized powders was carried out. The effects of lifter bars on the ball motions and milling of aluminum foils were also investigated. The aluminum foils were laminated each other, elongated, fragmented into small foils and finally formed into the flake powders during the dry ball-milling. The spherical atomized-powders were milled to coarse flake powders with high aspect ratio and then changed to fine flake powders with lower aspect ratio. Even though long times were required for making flake powders by milling of foils, the water covering areas of them were higher than those of powders milled using gas-atomized powders, suggesting aluminum foils were more plastically deformed by micro-forging. On the other hand, as the number of lifter bars increased, the necessary rotation speeds of milling jar for cascading mode and cataracting mode decreased drastically. It was possible to achieve same quality of milled flake powder by using the lifter bars under the lower milling speeds. The painting test showed that the appearance of painted surface was good and optimum content range of aluminum paste in car paint to maximize the degree of gloss was 3-5%.

• 한국식품영양학회지
• /
• 제23권1호
• /
• pp.23-29
• /
• 2010

Pigment concentrates with violet-red color and sweet taste were obtained from purple-fleshed sweet potato(PFSP) using ethyl alcohol and water. Extract from general potato(GP) were used as a control. The relative stability of PFSP pigment concentrate(PFSPPC) in a storage test over 15 days was confirmed in the order of dark > fluorescence > sun-light irradiation. The relative stability of GP pigment concentrate(GPPC) in a storage test over 15 days was confirmed in the order of sun-light > fluorescence > dark storage. The RRP of PFSPPC was higher than that of GPPC, but the color strength of GPPC was 1/2 that of PFSPPC. Treatment of PFSPPC with aluminum potassium sulfate(0.2~0.3%, w/w) best improved its stability. The improved RRPs of PFSPPC were 45.16~47.31% in sun light irradiation, 55.91~60.22% in fluorescence irradiation, and 76.34~75.97% in dark storage conditions. In substituting aluminum potassium sulfate for chitosan, an amount of 0.2~0.3%(w/w) was suitable, giving similar results in improving pigment stability for all concentrates tested. Also, freeze-dried PFSPPC powder was manufactured as a substitute for dextrin, and also as a substitute for chitosan to the extent of 0.25%(w/w). The results of storage stabilite for freeze-dried PFSPPC and GPPC powder over 15 days, irradiation were, PRRs of 74.47~89.36% and 61.54~76.92%, respectively. The stability improving effect of freeze dried PFSPPC powder was confirmed by the results of storage experiments at various conditions. The use of freeze-dried PFSPPC powder was therefore confirmed to be an effective treatment for general foods.

• 보존과학회지
• /
• 제38권4호
• /
• pp.327-333
• /
• 2022

Sri Lanka has four types of mural painting styles; Classic, Late Classic, Kandyan, and Southern styles, but there is little research on scientific analysis for mural paintings. In this study, we analyze white, yellow, and red clay pigments which were collected from ancient producing sites. Analyzing pigment samples shows that samples are containing aluminum oxide(Al₂O₃) and silicon dioxide(SiO₂) which are connected to the soil. And a degree of iron oxidation determines yellow or red colors. To understand the characteristics of clay pigment samples, we go over previous pigment analyses of mural paintings in Sri Lanka. Kaolin is identified after the 17^th century, yellow and red ochre are applied in early periods, Classic and Late Classic styles. The change in raw materials of pigments occurred in the 17^th century.

• 대한화장품학회지
• /
• 제13권1호
• /
• pp.7-14
• /
• 1987

Production of shikonin derivatives through cell suspension culture of Lithospermum erythrorhizon was investigated. Optimal concentrations of IAA and kinetin on the growth of cell suspension were 0.2 and 0.1 ppm respectively. Pigment content was markedly increased when aluminum oxide was added to the production medium and its optimal concentration was 1.5g/70ml medium. The most effective concentration of IAA was 0.5 ppm and the production of pigment did not depend on the kinetin concentration.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.66-71
• /
• 2006

The objective of this study was to find in what color Hanji(Korean hand-made paper) is dyed when it is dyed with a pigment extracted from clove tree using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. The Hanji dyed with aluminum acetate mordant was colored yellowish brown at pH 4.82, discoloration after aging was as much as a slight difference of color was recognized, and the decrease of strength after aging test was small. Thus, the method using aluminum acetate mordant was usable in coloring Hanji. The second most useful Hanji dyeing moth of was using distilled water and ferrous sulfate mordant, which dyed Hanji light brown at pH 6.03. However, when pigment was extracted using distilled water and copper sulfate mordant was used, discoloration was satisfactory but strength decreased too much and pale brown was obtained. Thus, this method was not usable.

• 공업화학
• /
• 제19권3호
• /
• pp.264-269
• /
• 2008

크롬산납안료입자의 합성과정에서 반응조건의 변화에 따른 입자의 성장특성, 첨가제 첨가에 의한 영향, 그리고 마이크로캡슐화에 관하여 조사하였다. 크롬산납 무기안료의 합성과정에서 생성용액의 pH가 낮을수록, 반응물질의 초기농도가 묽을수록 입자크기가 작은 균일한 분산입자를 얻을 수 있었다. 교반속도가 큰 경우에서 평균입자크기의 감소 및 증가에 대한 변화폭이 크게 나타남을 알 수 있었다. 합성된 크롬산납 안료입자의 숙성과정에 황산알루미늄을 첨가하여 표면처리 함으로써 입자크기의 제어가 가능하였고, 입자의 입도분포 상태를 최적 분산 상태로 유지하는 효과가 있음을 알 수 있었다. 안료입자의 마이크로캡슐화가 진행되는 용액의 pH 범위를 9~10, 반응온도를 $90^{\circ}C$ 이상으로 유지하고 마이크로캡슐화 후 충분한 건조를 통해 입자의 수분함량을 0.5% 이하로 유지할 때 최적의 마이크로캡슐화가 됨을 알 수 있었다.

• Corrosion Science and Technology
• /
• 제6권4호
• /
• pp.206-210
• /
• 2007

Aerospace aluminum alloys such as Al alloy 2024-T3 and 7075-T6 are subject to localized corrosion due the existence of intermetallics containing Cu, Mg or Zn. Chromate is currently widely used in the aerospace industry as the corrosion inhibitor for these alloys. However, chromate needs to be replaced due to its strong carcinogenicity. In this study, an extensive pigment screening has been performed to find replacements for chromates. Different categories of inhibitors were evaluated by immersion tests, DC polarization tests and other methods. Phosphates, zinc salts, cerium salts, vanadates and benzotriazole were found to be effective inhibitors for AA7075. Among those inhibitors, zinc phosphate was found to be the most effective in our novel, silane-based, one-step aqueous primer system. The performance of this primer is comparable to that of currently used chromate primers in accelerated corrosion tests, while it is completely chromate-free and its VOC is about 80% less than that of current primers. Studies by SEM/EDS showed that the unique structure of the superprimer accounts for the strong anti-corrosion performance of the zinc phosphate pigment. The self-assembled stratified double-layer structure of the superprimer is characterized by a less-penetrable hydrophobic layer at the top and a hydrophilic layer accommodating the inhibitors underneath. The top layer functions as the physical barrier against water ingress, while the lower layer functions as a reservoirfor the inhibitor, which is leached out only if the coating is damaged by a scratch or scribe. The presence of a silane in the primer further improves the adhesion and anti-corrosion performance of the primer.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.295-299
• /
• 2022

본 논문에서는 범퍼 스키드 플레이트 및 아웃사이드미러 하우징 부품에 적용되는 polypropylene (PP)와 acrylonitrile styrene acrylate (ASA) 소재를 활용하여 무도장 메탈릭 소재 구현에 대해 연구하였다. 금속 효과를 극대화하기 위해 알루미늄 입자의 종류, 크기, 함량을 최적화하였고 웰드 라인을 은폐하기 위해 종횡비가 상이한 하이브리드 알루미늄 입자를 사용하였다. 또한 부품 표면에 발생되는 플로우 마크를 개선하기 위해 유동성을 제어하였으며 사출 해석을 수행하였다.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.48-53
• /
• 2003

The objective of this study was to find in what color Korean handmade paper(Hanji) is dyed when it is dyed with a pigment extracted from waste onion peelings using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. 1. Korean handmade paper was dyed in different colors according to the kinds of mordant. Mainly it was dyed in orange-brown, and sometimes in gold or khaki. 2. Korean handmade paper dyed was not discolored much, which suggests that the pigment is strong under the condition of aging. 3. As for durability, Korean handmade paper dyed in gold was strongest. Korean handmade paper, to which aluminum sulfate, iron sulfate or sodium dichromate was applied as mordant, had poor durability. Thus, these were not suitable as mordant.

• 한국세라믹학회지
• /
• 제41권8호
• /
• pp.610-617
• /
• 2004

평균입자크기가 20 ${\mu}$이고, 두께가 0.2∼0.3 ${\mu}m$인 ${\alpha}-Al_2O_3$ 판상체를 제조하기 위하여 전구물질로써 황산알루미늄과 황산나트륨을 사용하여 수산화알루미늄을 제조하였다. 이때 첨가되는 인산나트륨의 양이 ${\alpha}Al_2O_3$ 판상체의 입자크기, 형상, 그리고 두께에 어떠한 영향을 미치는지에 대하여 관찰하였다. 인산나트륨을 첨가하지 않았을 경우, 대부분의 ${\alpha}-Al_2O_3$ 판 상체가 육각판상모양을 띠고 있었으나 그 두께가 1.0 ${\mu}m$ 이상으로 진주안료 기질로는 적합하지 않았다. 반면, 인산나트륨이 첨가되었을 경우, ${\alpha}-Al_2O_3$ 판상체의 두께를 감소시켜 각형비를 증가시키는 현상을 초래하였다.