• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.269-271
• /
• 2009

We investigated on the sintering behaviors and electrical properties of photo-sensitive aluminum (Al) electrode materials in plasma display panels. General characteristics of Al electrodes was totally different to that of conventional Ag materials; resistivity was decreased with the increasing of metal particle sizes and the amount of frit content and there is almost no width difference between developed and fired electrodes layers. Microstructures of fired electrodes revealed that Al electrodes had different mechanism on necking between metal particles and making electrical conducting path. Chemical durability (especially, antialkalinity) and adhesion of Al electrodes must be carefully controlled. Nevertheless there are difficulties of processing Al electrodes, we developed and optimized photo-sensitive Al materials as address electrodes without any changes of existing patterning equipment and sintering conditions.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.59-66
• /
• 2020

Herein, we investigated the thermal conductivity and thermal stability of natural rubber composite systems containing hybrid fillers of boron nitride (BN) and aluminum nitride (AlN). In the hybrid system, the bimodal distribution of polygonal AlN and planar BN particles provided excellent filler-packing efficiency and desired energy path for phonon transfer, resulting in high thermal conductivity of 1.29 W/mK, which could not be achieved by single filler composites. Further, polyethylene glycol (PEG) was compounded with a commonly used naphthenic oil, which substantially increased thermal conductivity to 3.51 W/mK with an excellent thermal stability due to facilitated energy transfer across the filler-filler interface. The resulting PEG-incorporated hybrid composite showed a high thermal degradation temperature (T₂) of 290℃, a low coefficient of thermal expansion of 26.4 ppm/℃, and a low thermal distortion parameter of 7.53 m/K, which is well over the naphthenic oil compound. Finally, using the Fourier's law of conduction, we suggested a modeling methodology to evaluate the cooling performance in thermal management system.

• 자원리싸이클링
• /
• 제28권4호
• /
• pp.23-29
• /
• 2019

블랙드로스로부터 순수한 알루미나를 회수하기 위해 기계적 처리한 블랙드로스의 수산화나트륨 침출용액을 대상으로 침전실험을 수행했다. 본 연구에서는 합성용액에 과산화수소를 침전제로 첨가했다. 실험변수중 과산화수소의 농도와 과산화수소와 용액의 부피비가 수산화알루미늄의 침전에 큰 영향을 미쳤다. 최적 조건에서 용액중 알루미네이트이온이 대부분 침전되었다. 수산화알루미늄을 $1200^{\circ}C$에서 하소시켜 ${\theta}$와 ${\alpha}$상을 지닌 알루미나를 얻었고 제조한 알루미나의 특성은 XRD와 EDS로 측정했다. 알루미나 입자의 평균 입경은 $3.73{\mu}m$ 이었다.

• 한국표면공학회지
• /
• 제54권1호
• /
• pp.25-29
• /
• 2021

The fabrication of nanopore membrane by deposition of Al2O3 film using electron-beam evaporation, which is fast, cost-effective, and negligible dependency on substance material, is investigated for potential applications in water purification and sensors. The decreased nanopore diameter owing to increased wall thickness is observed when Al2O3 film is deposited on anodic aluminum oxide membrane at higher deposition rate, although the evaporation process is generally known to induce a directional film deposition leading to the negligible change of pore diameter and wall thickness. This behavior can be attributed to the collision of evaporated Al2O3 particles by the decreased mean free path at higher deposition rate condition, resulting in the accumulation of Al2O3 materials on both the surface and the edge of the wall. The reduction of nanopore diameter by Al2O3 film deposition can be applied to the nanopore membrane fabrication with sub-100 nm pore diameter.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.489-495
• /
• 2022

This research investigated how adding Sb (0.75, 1.0, 2.0 and 5.0 wt%) to as-extruded aluminum alloys affected their microstructure, mechanical properties, electric and thermal conductivity. The addition of Sb resulted in the formation of AlSb intermetallic compounds. It was observed that intermetallic compounds in the alloys were distributed homogenously in the Al matrix. As the content of Sb increased, the area fraction of intermetallic compounds increased. It can be clearly seen that the intermetallic compounds were crushed into fine particles and homogenously arrayed during the extrusion process. As the Sb content increased, the average grain size decreased remarkably from 282.6 ㎛ (0.75 wt%) to 109.2 ㎛ (5.0 wt%) due to dynamic recrystallization by the dispersed intermetallic compounds in the aluminum matrix during the hot extrusion. As the Sb content increased from 0.75 to 2.0 wt%, the electrical conductivity decreased from 61.0 to 59.8 % of the International Annealed Copper Standard. Also, as the Sb content increased from 0.75 to 2.0 wt%, the ultimate tensile strength did not significantly change, from 67.3 to 67.8 MPa.

• 한국추진공학회지
• /
• 제15권5호
• /
• pp.96-106
• /
• 2011

젤 추진제는 젤 추진 시스템에서 액체 추진 시스템과 같이 제어의 용이성, 저장성, 취급성, 비누설성 등과 같은 장점을 포함한다. 또한, 젤 추진제는 액체 추진제와 비교했을 때 보다 높은 발열량 특성을 나타내며, 금속 입자(알루미늄, 보론)의 첨가로 높은 비추력을 얻을 수 있다. 미립화 특성과 관련하여 젤 추진제는 젤화제의 다양한 점도와 금속 입자의 첨가 정도에 따라 저조한 미립화 특성을 나타낸다. 젤 추진제의 미립화 특성 향상과 연소 효율을 증대 시키기 위해 젤화제의 함유량 변화와 금속 입자의 첨가 정도에 따른 젤 추진제 제조 기술을 바탕으로 동적 분무 특성, 연소 특성 연구를 수행하고 있으며, 이에 대한 연구동향을 소개한다.

• Corrosion Science and Technology
• /
• 제13권4호
• /
• pp.130-138
• /
• 2014

Wall thinning can be classified into three types: flow-accelerated corrosion, cavitation erosion and solid particle erosion. This article presents a study of solid particle erosion, which frequently causes damages to power plants' pipe system. Unlike previous studies, this study uses a mechanism to make solid particles in a fluid flow collide with pipe materials in underwater condition. Experiment is conducted in three cases of velocity according to solid-water ratio using the three types of the materials of A106B, SS400, and A6061. The experiments were performed for 30 days, and the surface morphology and hardness of the materials were examined for every 7 days. Based on the velocity change of the solid particles in a fluid flow, the surface changes, the change in the amount of erosion, the erosion rate and the variation in the hardness of carbon steel and aluminum family pipe materials can all be determined. In addition, factor-based erosion rates are verified and a wall-thinning relation function is suggested for the pipe materials.

• 소성∙가공
• /
• 제7권1호
• /
• pp.66-71
• /
• 1998

The present study is concerned with the hydrostatic extrusion process of copper-clad aluminium bar to investigate the bonding conditions as well as the basic flow characteristics. Considering the bonding mechanism of bi-metal contact surface as cold pressure welding the normal pressure and the contact surface expansion are selected as process parameters governing the bonding conditions, in this study the critical normal pressure required for the local extrusion-the protrusion of virgin surfaces by the surface expansion at the interface-is obtained using a slip line method and is then used as a criteron for the bonding. A rigid plastic finite element method is used to analyze the steady state extrusion process. The interface profile of bi-metal rod is predicted by tracking the paths of two particles adja-process. The interface profile of bi-metal rod is predicted by tracking the paths of two particles adja-cent to interface surface. The contact surface area ration and the normal pressure along the interface are calculated and compared to the critical normal pressure to check bonding. It is found that the model predictions are generally in good agreement with the experimental observations. The compar-isons of the extrusion pressure and interface profile by the finite element with those by experi-ments are also given.

• 한국분말재료학회지
• /
• 제16권3호
• /
• pp.209-216
• /
• 2009

A composite of rapidly solidified Al-6061 alloy powder with graphite particle reinforcements was prepared by ball milling and subsequent hot extrusion. The microstructure and mechanical properties of these composites were investigated as a function of milling time. With increasing milling time, the gas atomized initially and spherical powders became elongated with a maximum aspect ratio after milling for 30 h. Then, refinement and spheroidization were achieved by further milling to 70 h with a homogeneous and fine dispersion of graphite particles forming between the matrix alloy layers. The best compression and wear properties were obtained in the powder milled for 70 h, associated with the increased fine and homogeneous distribution of graphite particles in the aluminum alloy matrix.

• 상하수도학회지
• /
• 제28권5호
• /
• pp.589-600
• /
• 2014

Tuberculation and slime accumulated in water mains play an important role in modifying water quality of drinking water. Therefore, in this study, it was investigated that what materials were accumulated, and what components were included in the tuberculation and slime of water mains. The Various tuberculation and slime sample were collected from the 12 water mains to analyze their physical and chemical properties and crystal structure. As a analysis method, VSS(Volatile suspended solid), SEM(scanning electron microscope), EDS(Energy Dispersive X-ray spectroscope), ICP(Inductively Coupled Plasma Mass Spectrometer) and XRD(X-Ray Diffractomete) were used. The results of analysis on the samples, the representative materials were verified such as iron corrosion products, the fine sand particles generated during backwash, fine particles of activated carbon, aluminum used in coagulation process, and manganese included in raw water.