• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.445-451
• /
• 1989

Hydrolysis of aluminum isopropoxide with excess water in the presence of excess isopropyl alcohol resulted in the formation of boehmite in independence of temperature of hydrolysis and aging. Stoichiometric and substoichiometric amount of water hydrolyzed aluminum isopropoxide to pseudo-boehmite and amorphous one, respectively. $\alpha$-Al2O3 with 0.3${\mu}{\textrm}{m}$ in median size was produced by calcination of boehmite, bseudo-boehmite and amorphous boehmite at 125$0^{\circ}C$, 120$0^{\circ}C$, and 115$0^{\circ}C$ for one hour, respectively. Singnificant reduction in particle size was found during transition from $\theta$-Al2O3 to $\alpha$-Al2O3. $\alpha$-Al2O3 produced in this study was relatively uniform spherical and its purity was found to be over 99.9%.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.79-87
• /
• 1994

AIN은 불안정하여 물과 접촉하면 12시간 이내에 172cal/g의 열을 내면서 가수분해되어 알루미나 삼수화물이 생성되었다. AIN의 가수분해 과정은 초기에 비정질 알루미나 수화물이 생성되었으며, 가수분해 조건에 따라 비정질알루미나 수화물의 용해-재석출과정으로 알루미나 삼수화물 특히 bayerite가 생성되었고, 응축과정으로 pseudo-boe-hmite가 AIN 입자표면에 생성되었다. 가수분해 온도 4$0^{\circ}C$ 이하에서는 비정질 알루미나 수화물이, 4$0^{\circ}C$와 6$0^{\circ}C$ 사이에서는 bayerite가 각각 생성되었고, 6$0^{\circ}C$ 이상의 경우는 초기에 pseudo-boehmite의 입자표면에 형성되었다. bayerite는 가수분해 시간이 길수록, 그리고 용액내 pH가 높을수록 잘 생성되었으나 pseudo-boehmite는 가수분해 반응이 급격히 일어날 때와 용액내 ethyl alcohol의 존재로 OH 기의 흡착을 방해하여 가수분해 반응이 억제될 때 잘 생성되었다. 그리고 pH=2.0인 용액에서는 AIN의 가수분해가 거의 일어나지 않았다.

• 자원리싸이클링
• /
• 제28권1호
• /
• pp.15-22
• /
• 2019

습식법으로 고순도 알루미나를 제조할 수 있는 알콕사이드 가수분해법, 암모늄 명반의 열분해법, 암모늄 알루미늄탄산염(AACH) 열분해법을 소개하였다. 상기 세 공정으로 알루미나 제조시 용액의 pH, 온도와 불순물이 알루미나의 상전이와 고순도에 미치는 영향을 조사했다. 알콕사이드와 암모늄 명반의 열분해법으로는 ${\alpha}$와 ${\gamma}$알루미나의 제조가 가능하다. 그러나 AACH 열분해법으로는 ${\gamma}$알루미나 제조는 어렵다.

• 한국표면공학회지
• /
• 제57권1호
• /
• pp.49-56
• /
• 2024

Superhydrophobic surfaces have been expected to be able to provide considerable performance improvements and introduce innovative functions across diverse industries. However, representative methods for fabricating superhydrophobic surfaces include etching the substrate or attaching nanosized particles, but they have been limited by problems such as applicability to only a few materials or low adhesion between particles and substrates, resulting in a short lifetime of superhydrophobic properties. In this work, we report a novel coating technique that can achieve superhydrophobicity by electrophoretic deposition of aluminum nitride (AlN) nanopowders and their self-bonding to form a surface structure without the use of binder resins through a hydrolysis reaction. Furthermore, by using a water-soluble adhesive as a temporary shield for the electrophoretic deposited AlN powders, hierarchical aluminum hydroxide structures can be strongly adhered to a variety of electrically conductive substrates. This binder-free technique for creating hierarchical structures that exhibit strong adhesion to a variety of substrates significantly expands the practical applicability of superhydrophobic surfaces.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.677-681
• /
• 2015

$NaBH_4$ 가수 분해용 경량반응기의 재질로서 알루미늄 합금을 검토하였다. 알루미늄은 알칼리에 용해되는데, $NaBH_4$ 반응 용액중에 안정화제로 NaOH가 포함되어 있다. 알루미늄의 부식 속도를 낮추기 위해서 NaOH 농도를 낮추면 저장중에 $NaBH_4$가 손실된다. 그래서 최적의 NaOH 농도를 결정할 때 알루미늄 부식과 $NaBH_4$ 안정화를 모두 고려해야 한다. $NaBH_4$ 안정화와 알루미늄 부식속도는 수소발생속도에 의해 측정하였다. $NaBH_4$ 안정화는 $20{\sim}50^{\circ}C$에서 알루미늄 부식속도는 $60{\sim}90^{\circ}C$ 온도에서 실험하였다. 알루미늄 부식과 $NaBH_4$ 안정화를 모두 고려한 최적의 NaOH농도는 0.30 wt% 였다. 알루미늄 합금 6061를 사용해 반응기 온도 $80{\sim}90^{\circ}C$에서 NaOH 0.3 wt%로 200분간 반응을 진행하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2004년도 International Symposium on Powder Materials and Processing
• /
• pp.80-81
• /
• 2004

The results obtained are summarized as follows; (1) Boehmite produced in the high temperature and acid region showed a nano fibrous shape with several nm in diameter and several hundreds nm in length having high specific surface areas with a maximum value of $409m^2/g$. (2) In order to obtain nano fibrous boehmite with high surface areas from nano metal powder, the hydrolysis reaction should be done at a high temperature over $50^{\circ}C$, high acidity under pH 6, and terminated before a transition to the bayerite phase.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.60-66
• /
• 1991

The polymeric alumina sol was prepared by partial hydrolysis of aluminum sec-butoxide reacted with acetylacetone and its characteristics was investigated. The effects of alcohol solvent, acetylacetone, and acid concentration to the sol were investigated. FT-IR and Al27-MASNMR were used to study hydrolysis and polymerization reaction of aluminum complex. Synthesized sol showed the characteristics of polymeric alumina sol. To make a clear polymeric alumina sol, the optimum contents of acetylacetone, H2O and alcohol solvent were 0.4-0.6 mole, 0.25-1.25 mole, 3-5 mole per one mole alkoxide respectively. As a result of the Al27-MASNMR analysis, it was noted that hexa-penta-coordinated Al were main structure.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.672-681
• /
• 2015

As a part of abating the formaldehyde emission of amino resin-bonded wood-based composite panels, this study was conducted to investigate hydrolytic stability of urea-melamine-formaldehyde (UMF) resin depending on various hydrolysis conditions and hardener types. Commercial UMF resin was cured and ground into a powdered form, and then hydrolyzed with hydrochloric acid. After the acid hydrolysis, the concentration of liberated formaldehyde in the hydrolyzed solution and mass loss of the cured UMF resins were determined to compare their hydrolytic stability. The hydrolysis of cured UMF resin increased with an increase in the acid concentration, time, and temperature and with a decrease in the smaller particle size. An optimum hydrolysis condition for the cured UMF resins was determined as $50^{\circ}C$, 90 minutes, 1.0 M hydrochloric acid and $250{\mu}m$ particle size. Hydrolysis of the UMF resin cured with different hardener types showed different degrees of the hydrolytic stability of cured UMF resins with a descending order of aluminum sulfate, ammonium chloride, and ammonium sulfate. The hydrolytic stability also decreased as the addition level of ammonium chloride increased. These results indicated that hardener types and level also had an impact on the hydrolytic stability of cured UMF resins.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.246-246
• /
• 2003

• 한국세라믹학회지
• /
• 제33권3호
• /
• pp.348-354
• /
• 1996