• Resources Recycling
• /
• v.12 no.5
• /
• pp.10-15
• /
• 2003

In this study, the separation of rare earths and aluminium from the dried powder of waste cerium polishing slurry was investigated. Since cerium oxide, 40％ of rare earths, is the most stable state in rare earth, the dissolution of cerium oxide in acid solution is not easy. Therefore the dissolution process of cerium oxide by sulfation was examined in order to increase the recovery of rare earth. The rare earths could be separated from aluminum by double salt precipitation using sodium sulfate.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.24 no.1
• /
• pp.36-44
• /
• 2011

Objective : Propolis (PP) has been used in oriental medicine. PP has various biological activities. However, its immunoregulatory and anti-inflammatory activities have not been well studied. In this study, I investigated these activities of PP by using ovalbumin-induced allergic asthma in mice. Methods : To examine the effect of PP on allergic asthma, mice were sensitized with $100{\mu}g$ of OVA and 1mg of aluminum potasssium sulfate (Alum; Sigma) intraperitoneally on day 0 and 7. On day 14, mice were challenged on consecutive 3 days with 5% OVA and AHR was assessed 24 hours after the last challenge. To examine severity of AHR, I examined the population of eosinophiles and T cells in spleen and lung and cytokine production in T cells. Futhermore, I examined histological changes during the OVA-induced allergic asthma. Results and Conclusion : PP reduced the population of eosinophil and CD4+ T cells on the OVA-induced AHR mice model. PP also inhibited IL-4 production but increased INF-g production in T cells. These results suggest that PP may be beneficial material for allergic asthma.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.3
• /
• pp.107-117
• /
• 2007

Objective : Kumsoouyukkun-joen extract(KSE) has been used treating asthma for a long time in korea. In the present study, I examined the effects of KSE on the ovalbumin(OVA)-induced airway hyper-reactivity(AHR). Methods : To examine the effects of KSE on asthma, mice were sensitized with $100{\mu}g$ of OVA and 1 mg of aluminum potassium sulfate(Alum; Sigma)intraperitoneally on day 0 and 7. On day 14, mice were challenged on 3 consecutive days with 5% OVA and AHR was assessed 24 hrs after the last challenge. To examine severity of AHR, I examined eosinophil population and cytokine production in bronchoaveloar lavage fluid(BALF) and stained with hematoxylin and eosin in lung and also measured enhanced pause(Penh) in AHR from mice. Results and Conclusion : KSE potently inhibited the development of Penh and also reduced the number of eosinophil during OVA-induced AHR. KSE also inhibited cytokines production such as IL-4, IL-5 in BALF. Furthermore, KSE inhibited percentage of eosinophil in BALF. These results suggest that KSE may be beneficial oriental medicine for AHR.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.601-608
• /
• 2014

A coagulation-flocculation (CF) process using aluminum sulfate as a coagulant was employed to treat highly suspended solids in tunnel wastewater. Response surface methodology (RSM) based on a Box-Behnken design was applied to evaluate the effects of three factors (coagulant dosage, pH and temperature) on total suspended solids (TSS) removal efficiency as well as to identify optimal values of those factors to maximize removal of TSS. Optimal conditions of coagulant dosage and pH for maximum TSS removal changed depending on the temperature ($4{\sim}24^{\circ}C$). As temperature increased, the amount of coagulant dosage and pH level decreased for maximum TSS removal efficiency during the CF process. Proper adjustment of optimal pH and coagulant dosage to accommodate temperature fluctuations can improve TSS removal performance of the CF process.

• Journal of the Korean institute of surface engineering
• /
• v.23 no.1
• /
• pp.34-43
• /
• 1990

Al-Si piston alloys such as AlS10CuMg have been anodized to examine apossibility of forming a hard film aat relatively higher temperatures compard with those in conventional sulfuric acid processes. Three types of electrolytes have been employed in this study ; electrolyte A(15% H2SO4, $0^{\circ}C$), electrolyte B(12% H2SO4, 1% oxalic, $10^{\circ}C$), electrolyte C(tartaric acid 125g/L+oxalic 75g/L+aluminum sulfate 225g/L, $25^{\circ}C$). Hard anodisine process in electrolyte B at a current density of 1.54A/dm2 produced a harder film of VHN 396 at a relatibely low film forming voltage compared with those obtained in other electrolyte at equivalent current density. A liner relationship between hardness and abrasion resistance exists for Al-Si piston alloys. The hardness of anodized film decreasees with increasing silicon content in Al-Si alloys and also with bath temperature. The film hardeness of Na-modified alloy os higher than that of P-modified alloy due to its finer microstructre. The film on the silicon phase in Al-Si alloys is observed to be formed by lateral growth of oxide film nucleated at surroundings.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.444-451
• /
• 2004

This study was carried out to investigate the chemical and dyeing properties of Petasites japonicus leaf extract under the various extracting and dyeing conditions such as temperature, time, the ratio of water and pH, repetition of dyeing in silk and cotton fabrics with Petasites japonicus leaf. The results were as follows: 1. It was found that λ$_{\max}$ of color solution extracted by Petasites japonicus leaf has two peaks at 290nm and 323nm. 2. The optimum extracting conditions were studied at 10$0^{\circ}C$, 40min., pH 7 and 1 : 20(the ratio of water and Petasites japonicus leaf), the optimum dyeing temperature, dyeing time, dyeing pH and repetition of dyeing were 10$0^{\circ}C$, 60min., pH 7, repetitions of three times, respectively. 3. Silk and cotton fabrics dyed with Petasites japonicus leaf extract were colored yellowish orange. The colory Petasites japonicus leaf extract in silk and cotton fabrics were deeped by same-mordanting with aluminum potassium sufate and cupric sulfate. 4. Washing fastness of silk fabrics was 4∼5 grade, but cotton fabrics was 3∼4 grade, so washing fastness of silk fabrics washed with neutral detergent was excellent.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.18-26
• /
• 1991

This study was carried out to examine not only the effect and the process of activation of aluminum sulfate for the manufacture of PB and MDF, but also application of the activation treatment to PB and MOF made with MDI adhesive. The results were as follows: 1. For the manufacture of PB, activating effect did not take place Because the low moisture content of 30% in the process of activation treatment made probably insufficient activation. It needs to examine higher moisture content for the uniform and enough activation same as that of MOF. 2. In the case of MOF, Activating effect was excellent, it showed not only better results of MOR 48%, MOE 29%, IB 60% than those of the control but also better dimensional stability. 3. Application of alum activation to the PB and MDF made with MDI adhesive yielded no effects. Maybe it was the reson that the curing mechanism of MDI is different. 4. Modifing the wood surface was the oxidation and wettability was not the variable limiting glueline performance. It is necessary to make a more study about activating reaction.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.294-299
• /
• 2007

Natural gypsum has been used as a soil amendment in the United States. However, flue gas desulfurization (FGD)-gypsum has not traditionally been used for agricultural purpose although it has potential benefit as a soil amendment. To expand use of FGD-gypsum for agricultural purpose, the effect of FGD-gypsum on soil chemical properties was investigated in the field scales. Application rates for this study were 0 (control), 1.1, and 2.2 Mg ha-1 of FGD-gypsum. After two year application, the soil samples were taken to 110 cm depth and sub-sampled at 10 cm intervals. The heavy metal contents in FGD-gypsum were lower than ceiling levels allowed by regulations for land-applied biosolids. Soil pH was not largely affected by FGD-gypsum application. Although degree of calcium (Ca) saturation in surface horizons increases only slightly with respect to the control, there is a clear decrease in exchangeable aluminum (Al). FGD-gypsum clearly increases the soil electrical conductivity (EC) with increasing application rate. Water-soluble Ca and sulfate is increased with FGD-gypsum application and these ions moved to a depth of at least 80 cm after only 2 years. We conclude that surface application of FGD-gypsum can mitigate toxicity of Al and deficiency of Ca in subsoil of acid soil.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.2
• /
• pp.234-237
• /
• 2002

A 77-year-old female was admitted 3 hours after intentionally ingesting 5g of aluminum ammonium sulfate ('Alum') powder dissolved in water. Gastric lavage with normal saline, activated charcoal chelation, and supportive therapies were performed. She showed a high anion gap metabolic acidosis, which rapidly progressed to multiple organ failure including ARDS. The patient subsequently progressed to a refractory shock which eventually led to death.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.617-621
• /
• 2002

Calcium aluminosulfate (3CaO.3Al$_2$O$_3$.CaSO$_4$or $C_4$A$_3$S) was prepared by chemical synthesis from the nitrate salts and aluminum sulfate. $C_4$A$_3$S was the main phase after calcination at 110$0^{\circ}C$. The specific surface areas after calcination at 110$0^{\circ}C$ and 130$0^{\circ}C$ were about 2.5 and 1.0 $m^2$/g, respectively. Hydration was investigated by XRD, DSC, SEM, EDS, conduction calorimetry and analysis of the liquid phase. Calorimetry showed that the induction period was longer than that of a sample prepared by conventional solid state sintering and this was attributed to the formation of amorphous coatings in abundance of $Al_2$O$_3$ and SO$_3$. Crystalline hydration products, principally calcium monosulfoaluminate hydrate and Al(OH)$_3$, appeared subsequently.