• 한국결정성장학회지
• /
• 제31권6호
• /
• pp.264-269
• /
• 2021

본 연구는 공침법을 통하여 비정질 알루미늄 실리케이트 분말을 제조하였으며, 슬러리의 알루미늄 실리케이트 분말 함량 및 분산제 첨가량을 조절하여, 슬러리의 특성에 따른 분무 건조 알루미늄 실리케이트 과립 분말 제조의 영향 분석 및 최적화 연구를 진행하였다. 연구 결과, 알루미늄 실리케이트 슬러리의 분말 함량 27.5 wt% 이하, 슬러리의 분산제 첨가량 0.8 wt% 이상, pH 6~9의 중성 분위기의 슬러리에서 안정적으로 과립 분말이 제조되었으며, 슬러리의 분말 함량 20, 22.5 wt%에서 과립 분말의 평균 입도는 약 14 ㎛, 슬러리의 분말 함량 25, 27.5 wt%에서 과립 분말의 평균 입도가 약 19 ㎛인 것을 확인하였다. 분무 건조 과립 분말의 형상은 슬러리의 분산안정성 및 점도 영향을 받으며, 분말 함량이 높을수록 평균 입자 사이즈가 증가하는 것을 확인하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2003년도 춘계학술강연 및 발표대회
• /
• pp.30-30
• /
• 2003

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.716-717
• /
• 2006

Gas release behavior from aluminum and Al 7075 alloy powders during heating in argon was investigated by in-situ gas chromatography. Water vapor, hydrogen, carbon mono-oxide were detected as individual evolution spectra against heating temperature and time. The mechanisms of water and hydrogen evolutions were studied in detail for the determination of effective degassing condition. Magnesium in the alloy powder was found to lower the hydrogen evolution temperature to enhance overall hydrogen release.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.585-592
• /
• 1988

Aluminum sec-butoxide was synthesized from aluminum foil and alcohol. The characteristics of the alumina powder prepared from the synthesized alkoxide by the Yoldas method were studied. As a result of measuring the synthesized aluminum sec-butoxide by GC, the purity of the synthesized alkoxide was 98.7% on the basis of commercial alkoxide and the yield was 78.5%. A127-MASNMR analysis shows that powders dried at 9$0^{\circ}C$ and $\alpha$-Al2O3 have 6-cordinated structure and ${\gamma}$-Al2O3 has 4-coordinated structure. The characteristics of alumina powder prepared from the synthisized alkoxide showed the same characteristics with the alumina powder prepared from the commercial alkoxide.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1071-1074
• /
• 2006

Fabrication and investigation of composite made of graphite, SiC, mullite and aluminum as the additive are the aim of this project. Aluminum acts as an anti-oxidant. SiC is a non-metallic anti-oxidant that increases composite strength. Different compositions with influent percents of aluminum have been selected to determine product specifications by XRD, SEM and STA methods. Results show that the composition of 40wt% graphite-20% SiC- 20% mullite-20% aluminum is a more robust and occurs at elevated temperatures than other graphite combustion composites.

• The Korean Journal of Ceramics
• /
• 제1권1호
• /
• pp.35-39
• /
• 1995

Yttrium aluminum garnet(YAG) powders were synthesized by spray-drying of the hydroxides coprecipitated from a mixture of aqueous solutions of $Al(NO_3)_3.9H_2O \;and\; Y(NO_3)_3.6H_2O$ Phase formation in the powders during heat treatments and their sintering charactristics were investigated. In the powder obtained by washing the hydroxides before spray-drying, a metastable yttrium aluminum hexagonal (YAH) phase was first crystallized and then transformed into YAG as temperature was increased. The formation of YAH was attributed to a deviation in compositions of the particles from the starting composition of YAG. However, the powder prepared without washing step contained a stable yttrium aluminum monoclinic(YAM) phase in addition to YAG due to a large deviation from the starting composition. A powder compact of a single phase YAG was pressureless-sintered for 4 hrs at $1700^{\circ}C$ and the density was 93% of the theoretical density.

• 한국재료학회지
• /
• 제28권9호
• /
• pp.495-498
• /
• 2018

Intermetallic compound matrix composites have been expected to be established as high temperature structural components. $Ni_3Al$ is a representative intermetallic alloy, which has excellent ductility even at room temperature by adding certain alloying elements. $Ni_3Al$ matrix composites with aluminum oxide particles, which are formed by the in-situ reaction between the alloy and aluminum borate whiskers, are fabricated by a powder metallurgical method. The addition of aluminum borate whiskers disperses the synthetic aluminum oxide particles during sintering and dramatically increases the strength of the composite. The uniform dispersion of reaction synthesized aluminum oxide particles and the uniform solution of boron in the matrix seem to play an important role in the improvement in strength. There is a dramatic increase in strength with the addition of the whisker, and the maximum value is obtained at a 10 vol% addition of whisker. The $Ni_3Al$ composite with 10 vol% aluminum oxide particles $0.3{\mu}m$ in size and with 0.1 wt% boron powder fabricated by the conventional powder metallurgical process does not have such high strength because of inhomogeneous distribution of aluminum oxide particles and of boron. The tensile strength of the $Ni_3Al$ with a 10 vol% aluminum borate whisker reaches more than twice the value, 930 MPa, of the parent alloy. No third phase is observed between the aluminum oxide and the matrix.

• 한국분말재료학회지
• /
• 제10권6호
• /
• pp.415-421
• /
• 2003

The study for producing the flake powders by milling of aluminum foil and gas atomized powders was carried out. The effects of lifter bars on the ball motions and milling of aluminum foils were also investigated. The aluminum foils were laminated each other, elongated, fragmented into small foils and finally formed into the flake powders during the dry ball-milling. The spherical atomized-powders were milled to coarse flake powders with high aspect ratio and then changed to fine flake powders with lower aspect ratio. Even though long times were required for making flake powders by milling of foils, the water covering areas of them were higher than those of powders milled using gas-atomized powders, suggesting aluminum foils were more plastically deformed by micro-forging. On the other hand, as the number of lifter bars increased, the necessary rotation speeds of milling jar for cascading mode and cataracting mode decreased drastically. It was possible to achieve same quality of milled flake powder by using the lifter bars under the lower milling speeds. The painting test showed that the appearance of painted surface was good and optimum content range of aluminum paste in car paint to maximize the degree of gloss was 3-5%.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.712-713
• /
• 2006

We successfully developed Al-Si-Transition Metal (TM) -Rare Earth (RE) Powder Metallurgy (P/M) alloy with fine microstructure, which has high strength at high temperature. This material was compacted rapidly solidified powder and directly consolidated by hot extruding or forging. Before consolidating, rapid heating was performed on powder compaction in order to keep the fine microstructure in powder state. We have also investigated the processing conditions of this new alloy by computing simulations and experiments.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.106-110
• /
• 2011

A high thermal conductive AlN composite coating is attractive in thermal management applications. In this study, AlN-YAG composite coatings were manufactured by atmospheric plasma spraying from two different powders: spray-dried and plasma-treated. The mixture of both AlN and YAG was first mechanically alloyed and then spray-dried to obtain an agglomerated powder. The spray-dried powder was primarily spherical in shape and composed of an agglomerate of primary particles. The decomposition of AlN was pronounced at elevated temperatures due to the porous nature of the spray-dried powder, and was completely eliminated in nitrogen environment. A highly spherical, dense AlN-YAG composite powder was synthesized by plasma alloying and spheroidization (PAS) in an inert gas environment. The AlN-YAG coatings consisted of irregular-shaped, crystalline AlN particles embedded in amorphous YAG phase, indicating solid deposition of AlN and liquid deposition of YAG. The PAS-processed powder produced a lower-porosity and higher-hardness AlN-YAG coating due to a greater degree of melting in the plasma jet, compared to that of the spray-dried powder. The amorphization of the YAG matrix was evidence of melting degree of feedstock powder in flight because a fully molten YAG droplet formed an amorphous phase during splat quenching.