• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2017

The packaged optical fiber Bragg grating sensors which were networked by multiplexing the Bragg grating sensors with WDM technology were investigated in application for the structural health monitoring of the marine trestle structure transporting the ship. The optical fiber Bragg grating sensor was packaged in a cylindrical shape made of aluminum tubes. Furthermore, after the packaged optical fiber sensor was inserted in polymeric tube, the epoxy was filled inside the tube so that the sensor has resistance and durability against sea water. The packaged optical fiber sensor component was investigated under 0.2 MPa of hydraulic pressure and was found to be robust. The number and location of Bragg gratings attached at the trestle were determined where the trestle was subject to high displacement obtained by the finite element simulation. Strain of the part in the trestle being subjected to the maximum load was analyzed to be ${\sim}1000{\mu}{\varepsilon}$ and thus shift in Bragg wavelength of the sensor caused by the maximum load of the trestle was found to be ~1,200 pm. According to results of the finite element analysis, the Bragg wavelength spacings of the sensors were determined to have 3~5 nm without overlapping of grating wavelengths between sensors when the trestle was under loads and thus 50 of the grating sensors with each module consisting of 5 sensors could be networked within 150 nm optical window at 1550 nm wavelength of the Bragg wavelength interrogator. Shifts in Bragg wavelength of the 5 packaged optical fiber sensors attached at the mock trestle unit were well interrogated by the grating interrogator which used the optical fiber loop mirror, and the maximum strain rate was measured to be about $235.650{\mu}{\varepsilon}$. The modelling result of the sensor packaging and networking was in good agreements with experimental result each other.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.664-668
• /
• 2011

Spherical alumina precursors represented by $AlO_xCl_y(OH)_z$, 30~200 nm in particle diameter, were prepared by partial hydrolysis of $AlCl_3$ vapor in a 500 ml reactor. Investigated on the particle morphology and size were the effects of the reaction time, the stirring speed and the reaction temperature. The particle morphology and size was insensitive to the reaction time in the range 20 to 300 s. The variation of the stirring speed from 0 to 300 and 800 rpm showed that the particle size was the largest at 0 rpm. As the temperature was varied from 180 to 190, 200, $140^{\circ}C$, the particle size showed a maximum at $190^{\circ}C$. By calcination of the as-produced particles at $1,200^{\circ}C$ for 6h with a heating rate of $10^{\circ}C$/min, ${\alpha}$-alumina particles 45 nm in surface area equivalent diameter were obtained. The particle shape after calcination turned wormlike due to sintering between neighboring particles. A rapid calcination at $1400^{\circ}C$ for 0.5 h with a higher heating rate of $50^{\circ}C$/min reduced the sintering considerably. An addition of $SiCl_4$ or TMCTS(2,4,6,8-tetramethylcyclosiloxane) to the $AlCl_3$ reduced the sintering effectively in the calcination step; however, peaks of ${\gamma}$ or mullite phase appeared. An addition of $AlF_3$ to the particles obtained from the hydrolysis resulted in a hexagonal disc shaped alumina particles.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.365-376
• /
• 1999

The importance of finishing and polishing the restoration has been described by several authors. The final step provides for improved metallurgical properties, better marginal adaptation, reduced plaque accumulation. Unfortunately, finishing of the restorations can produce damage from temperature rises at the pulpal wall. The aim of this study was to determine the changes in temperature can be occurred during the use of finishing and polishing instruments under a variety of conditions. ; with or without a water coolant, intermittent or continuous operation, high or low rotation speed, remaining dentin thickness and various restorative materials. Class V preparations were cut on extracted molars and restored with composite resin(Z 100), resin-modified glass ionomer cements(Dyract, Fuji II LC), and amalgam. Finishing was done with aluminum oxide coated disc($Sof-lex^{(R)}$ polishing disc, 3M, USA). The following results were obtained. 1. The rise of temperature during polishing of amalgam restorations was the highest among the all experimental groups except polishing with water coolant(P<0.05). However, there were no statistical differences in temperature rises between Z 100, Dyract and Fuji II LC(P>0.05). 2. The intrapulpal temperature was greatly influenced by the applied time, and intermittent polishing was showed significantly lower temperature rises than continuous polishing(P<0.01). 3. The intrapulpal temperature was increased according to the application of polishing regard less of using water coolant. However, polishing with water coolant showed significantly lower temperature in the pulp than not used water coolant(P<0.01).

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.5
• /
• pp.425-433
• /
• 2004

Background : Induction of oral tolerance (OT) has been known to prevent allergic inflammation in acute asthma model within 4 weeks. However it is remained whether induction of OT may effectively prevent allergic inflammation in chronic asthma model over 4 weeks. We observed the effect of induction of OT on allergic inflammation and airway remodeling in chronic asthma model up to 8 weeks. Methods : 5-week-old female BALB/c mice divided into 4 groups-control group, asthma group, low dose OT group, and high dose OT group. To induce oral tolerance mice were fed ovalbumin (OVA) before sensitization with OVA and aluminum hydroxide-1 mg for 6 consecutive days in the low dose OT group and 25 mg once in the high dose OT group. Mice in the asthma group were fed phosphate buffered saline instead of OVA. After sensitization followed by repeated challenge with aerosolized 1% OVA during 6 weeks, enhanced pause (Penh), inflammatory cells, IL-13, and IFN-${\gamma}$ levels in bronchoalveolar lavage (BAL) fluids as well as OVA-specific IgE, IgG1, and IgG2a levels in serum were measured. In addition the degree of goblet cell hyperplasia and peribronchial fibrosis were observed from lung tissues by PAS and Masson's trichrome stain. Results : Both OT groups showed a significant decrease in Penh, inflammatory cells, IL-13, and IFN-${\gamma}$ levels in BAL fluids as well as OVA-specific IgE, IgG1, and IgG2a levels in serum compared with the asthma group (P<0.05). In addition, the degree of goblet cell hyperplasia and peribronchial fibrosis were significantly attenuated in both OT groups compared with the asthma group (P<0.01). Conclusion : These results suggest that induction of OT may effectively prevent allergic inflammation as well as airway remodeling even in chronic asthma model up to 8 weeks.

• Journal of Korean Society of Forest Science
• /
• v.77 no.1
• /
• pp.43-52
• /
• 1988

One-year-old seedlings of Ginkgo biloba were treated with various simulated acid rains(pH 2.0, pH 3.0, pH 9.0 and pH 5.0) to examine the effects of simulated acid rain on the chemical properties of the tested soil. The seedlings were grown in a pot($4500cm^3$)containing one of three different soils(nursery soil, mixed soil and sandy soil). Simulated acid rain was made by diluting sulfuric and nitric acid solution($H^1SO^4$ : $HNO^3$ =3 : 1, V/V) with tap water and tap water(pH 6.4), and treated by 5mm each time for three minutes during the growing seasons(April to October 1985). Acid rain treatments were done three times per week to potted seedlings by spraying the solutions. The chemical properties of potting media were compared among three soil types as well as among the various pH levels. The results obtained in this study were as follows : 1. Exchangeable calcium and magnesium contents and base saturation of the soil decreased with decreasing pH levels of acid rain, and their decreasing rates were as follows : sandy soil was the highest, followed by mixed and nursery soils, However, exchangeable aluminum content rather increased as the pH levels decreased. 2. Available phosphate in the soil decreased as the pH levels of acid rain decreased. Its content increased in nursery soil, compared with those before acid gain treatment, Gut decreased in mined and sandy soils. 3. Soil sulfate and nitrate contents increased remarkably as the pH levels decreased, and the only significant difference in the sulfate was found among the pH levels. Soil sulfate content was the highest in nursery soil, followed by mixed and sandy soils.

• Journal of Korean Society of Forest Science
• /
• v.78 no.1
• /
• pp.11-25
• /
• 1989

Four regions have been selected and surveyed to investigate the effects of air pollution and acid deposition on forest ecosystem. They were Seoul as urban region, Yeochon and Ulsan as industrialized region, and Kangwondo as uncontaminated region. Soil pH and the distribution of elements were analyzed in process of time for three years as well as by distance from pollution sources. In general, forest soils acidified in process of time from pollution sources to suburban areas. Hydrogen ion concentration in forest soils increased in 1988 as much as 60% of that in previous year. Average soil pH values in coniferous forest were 4.45 in Seoul, 4.54 in Yeochon, 4.81 in Ulsan, and 6.03 in Kangwondo. Forest soil pH increased with the distance from pollution sources to suburban areas at constant rate within short ranges (up to 30 km) and at decreasing rate within long ranges (up to 200 km). On the contrary, sulfur content in soils decreased every year except in Yeochon region. Base saturation of forest soils in polluted regions were all below 20% level compared with 70% in Kangwondo region. Active aluminum content in soils increased with the soil acidification at the highest rate in Yeochon, and the next in Ulsan and Seoul. Heavy metal content such as copper and zinc in tree tissues were the lowest in Kangwondo region, and the next in Yeochon, Seoul and Ulsan.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.349-362
• /
• 1999

To understand the role of protozoa in the early formation of microbial fouling community, the studies on the formation of microbial film, the succession of microbial fouling communities, and the grazing pressure on bacteria population in microbial film were carried out in the laboratory, Inchon outer port and Inchon inner harbour. Bacteria and heterotrophic flagellates formed primary microbial film on the aluminum surface within 6 hours and oligotrich ciliates were observed 2 cells $mm^{-2}$ on the same surface at 9 hours in Inchon inner harbour which had physically stagnant condition. The larvaes of Balanus albicostatus which were dominant meiobenthos in Inchon coastal area attached on the glass surface at the first day of experiment. Heterotrophic flagellates showed maximum abundance of 465 cells $mm^{-2}$ at the 13rd day and ciliates showed maximum abundance of 63 cells $mm^{-2}$ at the 11st day in the Inchon inner harbour. In the Inchon outer port which opens to the outer sea, the maximum abundance of protozoa occurred at early phase, but not so many. The dominant heterotrophic flagellates were Metrornonas simplex and Bodonids. Dominant ciliates were small tintinnids and oligotrich ciliate Strombidium sp., Large Strombidium (oligotrich ciliate) and sessile Acineta turberosa (suctorian ciliate) occurred after 10 days. The attached larvae of Balanus occurred as biofouling organism on the early surface and showed maximum abundance of 18 indiv. $cm^{-2}$ at 7th day. At that time, adult barnacles were observed on the surface and dead barnacles were observed after two days. Except barnacles, the larvaes of Anthozoa sp., Oysters (Crassostrea gigas) and Polychaeta were observed on the surface from 3rd day. 3 benthic copepods including Harpacticus sp., I isopod, 1 polychaeta and 1 gastropoda were observed as predators of the microbial film on the surface after 7 days when microbial film developed very well. Although the ingestion rates of protozoa on the bactctia of the rnicrobi31 film were relatively low, the average grazing rate of protozoa on bacteria was high of 0.058 $h^{-1}$. This implied that the grazing pressure of protozoa influences the mortality of bacteria populations on the microbial film. but protozoa cannot get enough energy from only bacteria on the microbial film.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.97-102
• /
• 2006

Anodic alumina with self-organized and ordered nano hole arrays can be a good candidate of an irradiation mask to modify the properties of nano-scale region. In order to try using porous anodic alumina as a mask for ion-beam patterning, ion beam transmittance of anodic alumina was tested. 4 Um thick self-standing AAO templates anodized from Al bulk foil with two different aspect ratio, 200:1 and 100:1, were aligned about incident ion beam with finely controllable goniometer. At the best alignment, the transmittance of the AAO with aspect ratio of 200:1 and 100:1 were $10^{-8}\;and\;10^{-4}$, respectively. However transmittance of the thin film AAO with low aspect ratio, 5:1, were remarkably improved to 0.67. The ion beam transmittance of self-standing porous alumina with a thickness larger than $4{\mu}m$ is extremely low owing to high aspect ratio of nano hole and charging effect, even at a precise beam alignment to the direction of nano hole. $SiO_2$ nano dot array was formed by ion irradiation into thin film AAO on $SiO_2$ film. This was confirmed by scanning electron microscopy that the $SiO_2$ nano dot array is similar to AAO hole array.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.161-175
• /
• 2008

The soil developed from volcanic ash in Jeju Island, Korea, were classified as typical Andisols. The soils had acidic pH, high water contents, high organic matters and clay-silty textures. The crystalline minerals of the samples were mainly composed of ferromagnesian minerals such as olivine and pyroxene, and iron oxides such as magnetite and hematite derived from basaltic materials. A large amount of gibbsite was found at the subsurface horizon as a secondary product from the migration of excessive aluminum. In addition, our study has shown that considerable amounts of poorly ordered minerals like allophane and ferrihydrite were present in Jeju soils. The contents of $SiO_2$ were lower than those of other soil orders, but $A1_2O_3$ and $Fe_2O_3$ contents were higher. These results are some of the important chemical properties of Andisols. The contents of heavy metals were in the range of $84{\sim}198$ for Zn, $56{\sim}414$ for Ni, $38{\sim}150$ for Co, $132{\sim}1164\;mg\;kg^{-1}$ for Cr, which are higher than the worldwide values in most of the soils. Some soil samples contained relatively high levels of Cr exceeding 1000 mg/kg. Mean reduction capacity of the Jeju soils was $6.53\;mg\;L^{-1}$ reduced Cr(VI), 5.1 times higher than that of the non-volcanic ash soils from inland of Korea. The soil reduction capacity of the inland soils had a good correlation with total carbon content (R = 0.90). However, in spite of 20 times higher total carbon contents in the Jeju soils, there was a week negative correlation between the reduction capacity and the carbon content (R = -0.469), suggesting that the reduction capacity of Jeju soils is not mainly controlled by the carbon content and affected by other soil properties. Correlations of the reduction capacity with major elements showed that Al and Fe were closely connected with the reduction capacity in Jeju soil (R = 0.793; R = 0.626 respectively). Moreover, the amounts of Ni, Co and Cr had considerable correlations with the reduction capacity (R = 0.538; R = 0.647; R = 0.468 respectively). In particular, in relation to the behavior of redox-sensitive Cr, the oxidation of the trivalent chromium to mobile and toxic hexavalent chromium can be restricted by the high reduction capacity in Jeju soil. The factors controlling the reduction capacity in Jeju soils may have a close relation with the andic soil properties explained by the presence of considerable allophane and ferrihydrite in the soils.

• Korean Journal of Poultry Science
• /
• v.31 no.4
• /
• pp.213-219
• /
• 2004

The objectives of this study were to investigate the effect of applying three different chemical additives to the litter (rice hull) on broiler performance, ammonia and carbon dioxide gas reduction in a poultry house at 6 weeks. A total of 96 broiler chicks (6 treatments$\times$4 replicates$\times$4 birds) were fed the experimental diets for 6 weeks. The chemical additives were applies as a top dressing to the litter at a rate of 200 g ferrous sulfate $(FeSO_4)$, 200 g aluminum chloride $(AlCl_3)$ + 50 g calcium carbonate $(CaCO_3)$ and 20 g potassium permanganate $(KMnO_4)$ per kg litter, while the control group did not have the three different chemicals added to the litter. There were no significant differences in broiler performance between the three chemical additives and control group. $FeSO_4\;and\;AlCl_3\;+\;CaCO_3$ treatment reduced ammonia production from the litter at 6 weeks by as much as 91 and $53\%$, respectively (P<0.05). $KMnO_4$ treatment decreased ammonia production at 6 weeks up to $69\%$ compared to the controls (P<0.05). Poultry litter amended with $AlCl_3\;+\;CaCO_3\;and\;KMnO_4$ also caused a decrease (P<0.01) in carbon dioxide productions at 6 weeks (59 and $65\%$, respectively). In conclusion, although broiler performance was not affected by the three chemical additives and control group, these results indicate that $FeSO_4,\;AlCl_3\;+\;CaCO_3\;and\;KMnO_4$ application to litter in a poultry house resulted in a significant reduction in atmospheric ammonia and carbon dioxide gas.