• Resources Recycling
• /
• v.6 no.1
• /
• pp.5-10
• /
• 1997

The aluminum was recovered from the middle size (Q1.0-12.0 mm) aluminum drosses using NaCl and KC1 mixuture as a basic salt flux. The maximum aluminum recovery was about 76.9% when 40% basic salt flux was added to aluminum dross at 850$^{\circ}$C for two hours. Also, aluminum remvery increased with increasing fluoride (1%-5%) addition to basic salt flux. But, there was no considerable effect due ta the increasing of viscosity when the fluorides were added over 5%, respectively. E s p d y , the most aluminum recovery was about 83.5% when 5% cryolite was added to 40% basic salt flux.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.166-173
• /
• 2001

Composite materials consists of two or more different material layers. The usefulness of clad metal rods forms the possibilities of combination of properties of different metals. Copper clad aluminum composite materials are being used for economic and structural purpose. In this study, composite billet consists of commercially pure copper and aluminum(A6061) and experimental conditions consist of the combinations of clad thickness, extrusion ratio, and semi-cone angle of die. In order to investigate the influence of these parameters on the hot direct extrudability of the copper clad aluminum composite material rods, the experimental study have been performed with various extrusion temperatures, extrusion ratios, semi-cone angles of die, and composition rate of Cu:Al.

• Journal of Korea Foundry Society
• /
• v.31 no.2
• /
• pp.83-86
• /
• 2011

Ni-Al based intermetallic compounds of self-propagating high-temperature synthesis (SHS) by the heat of molten aluminum and been coated on the aluminum casting alloy. The effects of the pouring temperature in casting and the thickness of casting substrate on SHS of the coating layer have been investigated. The experimental result showed that the reaction of the coating layer was activated with increasing the pouring temperature in casting and the thickness of casting substrate. However, the aluminum substrate was re-melted by the heat of formation for intermetallic compounds. Then, it was considered that some mechanical or thermal treatments for elemental powder mixtures were required to control the heat of formation for intermetallic compounds in advance.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.92-102
• /
• 1996

In this research, to develope the A1 7075/CFRP multilayered hybrid composites, CRALL(Carbon Reinforced aluminum lamiate) specimens were processed by autoclavecuring system that curing temperature, time, surface pretreatment condition of aluminum were constant. Andthe fatigye life and failure mechanism on CFRP volume fraction and fiber orientation of CRALLspecimens were investigated. A fatigue life was greatly influenced by effect of CFRP fiber volume fraction but it was less effected than those of fiber orientation. The fatigue failure arised from interface delamination of CFRP and aluminum sheet after shear fracture of aluminum layer. The failure mechanism is assumed that the aluminum laminates which divide the CFRP into many thim layers tend to arrest the failure propagation.

• Journal of the Korean Ceramic Society
• /
• v.31 no.5
• /
• pp.485-490
• /
• 1994

The reactive ion etching characteristics of aluminum oxide films, prepared by PECVD, were investigated in the CCl4 plasma. The atomic chlorine concentration and the DC self bias were determined at various etching conditions, and their effects on the etch rate of aluminum oxide film were studied. The bombarding energy of incident particles was found to play the more important role in determining the etch rate of aluminum oxide rather than the atomic chlorine concentration. It is considered to be because the bombardment of ions or neutral atoms breaks the strong Al-O bonds of aluminum oxide to help activate the formation reaction of AlCl3 which is the volatile etch product.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.759-765
• /
• 2000

A composite material consists of two or more different material layers. Copper clad aluminum composite materials are being used for economic and structural reasons. This study is concerned with experimental investigation in the direct extrusion of copper clad aluminum rods through conical dies. The suggestion are given for the proper extrudability of copper clad aluminum rods via hot direct extrusion. This paper presents the variation of flow state and hardness at a variable of extrusion ratio and semi-angle of die. By measuring after and before extrusion radius ratio of Cu sleeve and Al core, proportional flow state has been considered. And also by measuring hardness, through extrusion way, a variation of hardness has been considered.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.585-592
• /
• 1988

Aluminum sec-butoxide was synthesized from aluminum foil and alcohol. The characteristics of the alumina powder prepared from the synthesized alkoxide by the Yoldas method were studied. As a result of measuring the synthesized aluminum sec-butoxide by GC, the purity of the synthesized alkoxide was 98.7% on the basis of commercial alkoxide and the yield was 78.5%. A127-MASNMR analysis shows that powders dried at 9$0^{\circ}C$ and $\alpha$-Al2O3 have 6-cordinated structure and ${\gamma}$-Al2O3 has 4-coordinated structure. The characteristics of alumina powder prepared from the synthisized alkoxide showed the same characteristics with the alumina powder prepared from the commercial alkoxide.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.276-288
• /
• 1989

Interpretation of high-resolution transmission electron microscopy images of defects and complex structures such as found in ceramics generally requires matching of the images with compound image simulations for reliable interpretation. A transmission electron microscopy study of the aluminum oxide was carried out at high-resolution, so that the crystal structure of the aluminum oxide could be modelled on an atomic level. In conjunction with computer simulation comparisons, the images reveal directly the atomic structure of the oxide. Results show that comparison between experimental high-resolution electron microscopy images and simulated images leads to a one to one correspondence of the image to the atomic model of the aluminum oxide. The aluminum atoms are disordered in the octahedral sites and the tetrahedral sites in the spinel aluminum oxide.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.1
• /
• pp.49-52
• /
• 2004

In this study, we investigated the fatigue characteristics of silane-treated aluminum/CFRP composite material. Three different specimens of cracked aluminum, cracked aluminum repaired with CFRP patch, and silane-treated aluminum repaired with CFRP patch were used in the fatigue tests. Load ratio and the frequency applied in the fatigue tests were 0 and 10 Hz, respectively. The results showed that the specimen repaired by composite patch showed three times more improved fatigue life than aluminum specimen. Furthermore, the silane-treated specimen repaired by composite patch showed four times more improved fatigue life than the non-treated specimen.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.483-484
• /
• 2012