• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.414-417
• /
• 2003

A copper-clad aluminium composite bar is lighter and less expressive than a commercial copper alloy bar. Copper-clad aluminium composite bar can be fabricated by hot hydrostatic extrusion process. In this work, the effect of die angle on the compressive properties of copper-clad aluminium composites fabricated using hydrostatic extrusion process was investigated experimentally. The results showed that optimum half die angle was in the range of 40$^{\circ}$ to 50$^{\circ}$ for an extrusion ratio of 19. The results also showed that the half die angle had little influence on the compressive strength of copper-clad aluminium composites. A diffusion layer increased with increasing die angle.

• 한국식품영양학회지
• /
• 제7권4호
• /
• pp.318-322
• /
• 1994

Aluminium alloy, comprising water, silicone manganese and porous aluminium carrier added into soybean oil in order to investigated its effect on polar lipid content, polymer content, conjugated dienoic acid and free fatty acid value during deep-fat frying at 185$^{\circ}C$. Increase rates of polar lipid and polymer content of the frying ell were reduced about one thirds of the oil without aluminium alloy during deep-fat frying. The aluminium alloy, however, have no significantly effect to inhibit the increase of conjugated dienoic acid and free fatty acid value. Treatment of the frying oil with aluminium alloy was found to be able to inhibit polymer and polar lipid formation.

• 한국안전학회지
• /
• 제7권4호
• /
• pp.7-12
• /
• 1992

The smouldering combustibility of cellulose insulation treated with boric acid-borax-aluminium sulfate as combustion retardants are examined by cigarette ignition method and electrical cardrige heater method. The effectiveness of Aluminium sulfate as a third combustion are acceptable both smouldering resistance and flame resistance at 18% level of all examined formulation. As the proportion of Aluminium sulfate in the formulation was increased, the flame resistance of cellulose insulation was improved.

• The Korean Journal of Ceramics
• /
• 제5권1호
• /
• pp.78-81
• /
• 1999

Aluminium titanate is highly anisotropic in thermal expansion. As a result, thermal stresses build up in the material and intergranular cracks can develop. Both the outstanding thermal shock resistance and the low mechanical strength of aluminium titanate ceramics are a result of intergranular microcracking. The authors have previously identified a possibility of remarkably increasing fracture toughness of aluminium titanate without excessive penalty on strength. The paper shows that sintered density and porosity measurements can be used for optimizing the sintering and microstructure of aluminium titanate for an ideal balance between toughness and strength and, hence, the best thermal shock resistance.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.107-116
• /
• 2005

Precipitated silicas modified by aluminium were characterised using inverse liquid chromatography in anhydrous heptane with squalene as probes. Their monolayer capacities of adsorption, Langmuir's and Henry's constants were determined from the desorption isotherms according to frontal analysis. A narrow band consisting of isotherms was observed. The introduction of aluminium has little influence on the monolayer capacity, Langmuir's constants and the Henry constant. Experimental data show that neither the amounts of aluminium on the silica nor the methods of the introduction of aluminium into the silica influence the interactions between the squalene and the silicas.

• Corrosion Science and Technology
• /
• 제10권6호
• /
• pp.199-204
• /
• 2011

Hot dip metallic coated steels like as galvanized (GI), zinc-aluminium (GL) and aluminium coated steels are mostly used where corrosion resistance is needed. There are two kinds (type 1 and type 2) of aluminium coated steel being commercially used among them. Type 1 aluminium coated steel is coated with an Al-5~11 wt%Si alloy and Type 2 aluminium coated steel consists of commercially pure aluminium. Type 1 Al coated steel is generally used in automotive components and electrical appliances while type 2 aluminium coated steel is mainly used in construction applications such as building cladding panels, air conditioning and ventilation system. In this study, Type 1 aluminium coated steels have tested by accelerated conditions (salt spray or corrosive gas) and outdoor exposure condition in order to understand their corrosion behaviour. Due to the distinct corrosion mechanism of Al which exposes to the severe chloric condition, Salt Spray Test cannot predict the ordinary atmospheric corrosion of Al based coated materials. In addition, the test results and their corrosion feature of Al coated steel sheets will be discussed comparing with other metallic coated steel sheets of GI and GL.

• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.584-594
• /
• 1996

본 연구에서는 고령토 침출용액으로부터 고순도의 염화알루미늄 결정을 분리하고자 침출용액의 용존 염화알루미늄의 농도, 결정화 온도 및 염소가스 주입속도 등의 결정화 조건이 염화알루미늄 결정의 순도에 미치는 영향에 대해 연구하였다. 결정의 순도는 침출용액의 염화 알루미늄의 과포화 농도 수준에 크게 영향을 받았다. 결정화의 조건에 따라 염화알루미늄의 과포화 농도가 낮게 형성되면 철이온의 함유가 낮은 고순도의 염화알루미늄 결정이 생성되었다. 침출용액 내의 과포화 농도 수준은 용액 내의 용존 염화알루미늄의 농도, 염산 농도, 결정화 온도 등에 의해 결정되었다. 그러나 이와 같은 결정화 조건의 변화에도 불구하고 염화알루미늄의 결정 모양은 침상형으로 일정하게 나타났다. 고령토 침출용액의 염산농도 측정을 위하여 Shank [9]가 제시한 Oxalate 적정법을 적용하였으며 고령토 침출용액과 같은 다성분 이온 용액에서도 정확한 염산 농도 측정이 이루어질 수 있음을 알 수 있었다.

• 상하수도학회지
• /
• 제12권3호
• /
• pp.30-40
• /
• 1998

Increasing water consumption produced sludge problems of the water treatment plants. The objective of this study is to investigate aluminium coagulants recovery n acidic and alkaline conditions. Water treatment plant sludge produced in Pusan Metropolitan City were tested for the aluminium extraction process. Experiment samples were obtained in summer from water treatment plants of Deoksan and Myongjang. Aluminium coagulants used in these plants during the test period were polyaluminium chloride(PAC), polyaluminium sulfate organic(PSO), polyaluminium sulfate silicate(PASS). Aluminium contents of water treatment sludge were in the range of 7.2~10.9% of the total solids. The recovery percentages for aluminium and iron by acidic extraction method was evaluated to 88% and 42% respectively. Extracted mass variation for other materials such as iron, manganese, total organic carbon was observed during the extraction operation. Alkaline extraction produced more than two times amount of total organic carbon than that in the acidic extraction process.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.455-463
• /
• 1996

Aluminium nitride (AlN) powder was prepared by using aluminium (III) complexes with dibasic carboxylate ligands(adipato)(hydroxo) aluminium(III) and (hydroxo)(succinato)aluminium (III) as a precursor. The AlN pow-der was obtained by calcining the complexes without mixing any carbon source under a flow of ammonia at 120$0^{\circ}C$ Contary to the conventional carbothermal reduction and nitridiation the process of decarboniza-tion of the residual carbon was not required because of the reaction of ammonia with carbon at temperature >100$0^{\circ}C$. Fine AlN powder was also prepared by calcining a mixture of an (adipato)(hydroxo)aluminium(III) complex and carbon under a flow of nitrogen at 140$0^{\circ}C$ The AlN powders prepared were ultrafine and their morphology was almost the same as that of powders of two precursors.

• 융복합기술연구소 논문집
• /
• 제4권2호
• /
• pp.41-45
• /
• 2014

Micro fabrication technologies of aluminium have been required to satisfy many demands in technology fields. Pulsed laser beam machining can be an alternative method to accomplish the micro machining of aluminium. Pulsed laser beam can be applied to micro machining such as micro drilling and milling. Using pulsed laser beam, the machining characteristics of aluminium in micro drilling and milling were investigated according to average power, repetition rate, moving speed of spot. The laser beam machining with the optimal conditions can achieve precise micro figures. As a result, micro pattern, text and structures on aluminium surface was successfully fabricated by pulsed laser beam machining.