• 한국결정성장학회지
• /
• 제27권5호
• /
• pp.223-228
• /
• 2017

Aluminum nitride (AlN) powder was successfully synthesized at low temperature via carbothermal reduction and nitridation (CRN) assisted by microwave heating. The synthesis processes of AlN powder were investigated with X-ray diffraction, FE-SEM, FT-IR and TGA/DSC. Aluminum nitrate was used as an oxidizer and aluminum source, urea as fuel, and glucose as carbon source. These starting materials were mixed with D.I water and reacted in a flask at $100^{\circ}C$ for 20 minutes. After the reaction was finished, black foamy intermediate product was formed, which was considered to be an amorphous $Al_2O_3$ particles through intermediate product obtained by solution combustion synthesis (SCS) at the results of X-ray diffraction patterns and FT-IR. This intermediate product was nitridated at temperatures of $1300^{\circ}C$ and $1400^{\circ}C$ in $N_2$ atmosphere by a microwave heating furnace and then decarbonated at $600^{\circ}C$ for 2 hours in air. It should be noticed from FE-SEM images that as nitridated particles, identified as AlN from X-ray diffraction patterns, are covered with carbon residues. After decarbonating the nitridated powders, the spherical pure AlN powders were obtained without alumina and their particle sizes were dependent on the nitridating temperature with high temperature of $1400^{\circ}C$ giving large particles of around 70~100 nm.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.100-108
• /
• 1989

Aluminum hydroxides were prepared by the alkoxide hydrolysis method using Al-isopropoxide as a starting material and NH4OH as a catalytic agent. When Al-isopropoxide was hydrolyzed in a H2O-NH3 system, only Al(OH)3 was obtained over all pH values. However, AlOOH was formed besides Al(OH)3 when Al-isopropoxide was hydrolyzed in a H2O-NH3-isopropyl alcohol system. The AlOOH/Al(OH)3 ratio was increased as the isopropyl alcohol content was increased. The hydroxides, Al(OH)3 and AlOOH, obtained in this study and the commerical products, $\alpha$-Al2O3 and AlOOH were subjected to the carbothermal reduction and nitridation reaction to product AlN powder, using carbon black as a reducing agent under N2 atmosphere at various temperatures. AlN was synthesized from the obtained Al(OH)3 and the commercial AlOOH at 145$0^{\circ}C$, however, synthesized from the obtained AlOOH and the commercial alpha-alumina at 135$0^{\circ}C$. The temperature difference is assumed to be attributed to the reactivity of those powders. AlN powder prepared from the Al-isopropoxide was observed to have the narrower particle size distribution than that prepared from the commercial $\alpha$-Al2O3 or AlOOH.

• 한국결정성장학회지
• /
• 제28권6호
• /
• pp.235-242
• /
• 2018

$Y_2O_3$를 소결조제로 사용한 질화알루미나(AlN)에 다양한 소결조건과 MgO의 도핑이 고온전기전도도의 특성에 대해 미치는 영향에 대해 연구하였다. MgO를 도핑 하였을 때, 2차상으로 스피넬과 페로브스카이트 상이 생성되었고, 이는 전기적 특성에 영향을 끼쳤다. 고온 임피던스를 분석한 결과 MgO의 도핑은 AlN 입내의 활성화 에너지와 전기전도도의 감소를 보이는 반면에, 입계의 경우에는 활성화 에너지와 전기전도도의 증가를 보였다. 이는 저항이 높은 비정질의 액상이 입계에 형성되거나, Mg의 석출에 의하여 쇼트키 장벽이 높아졌기 때문으로 예상된다. MgO가 도핑된 AlN을 어닐링 한 경우에는 어닐링 하지 않은 경우에 비하여, 활성화 에너지와 전기전도도가 더욱 증가하는 것을 볼 수 있었다. 이러한 결과는 $1500^{\circ}C$에서 어닐링을 통하여 미세구조분석에서 보이는 바와 같이 Mg 이온이 입계에서 입내로 확산된 때문으로 예상된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.337-341
• /
• 2004

Engineering ceramics have superior heat resistance, corrosion resistance, and wear resistance. Consequently, these art significant candidates for hot-section structural components of heat engine and the inner containment of nuclear fusion reactor. Besides, some of them have the ability to heal cracks and great benefit can be anticipated with great benefit the structural engineering field. Especially, law fracture toughness of ceramics supplement with self-healing ability. In the present study, we have been noticed some practically important points for the healing behavior of silicon nitride, alumina, mullite with SiC particle and whisker. The presence of silicon carbide (SiC) in ceramic compound is very important for crack-healing behavior. However, self-healing of SiC has not been investigated well in detail yet. In this study, commercial SiC was selected as sample, which can be anticipated in the excellent crack healing ability. The specimens were produced three-point bending specimen with a critical semi-circular crack of which size that is about $50-700{\mu}m$. Three-point bending test and static fatigue test were performed cracked and healed SiC specimens. A monotonic bending load was applied to cracked specimens by three-point loading at different temperature. The purpose of this paper is to report Strength Properties and Elastic Waves Characteristics of Silicon Carbide with Crack Healing Ability.

• 한국재료학회지
• /
• 제22권3호
• /
• pp.155-158
• /
• 2012

In this work, AlON-$Al_2O_3$ coatings were prepared on Al2021 alloy by the electrolytic plasma processing (EPP) method. The experimental electrolytes include: 2 g/l NaOH as the electrolytic conductive agent, 10 g/l $Na_2AlO_2$ as the alumina formative agent, and 0.5 g/l $NaNO_2$, $NaNO_3$, and $NH_4NO_3$ as the nitride inducing agents. The effects of different nitrogen inducing agents were studied by a combined compositional and structural analyses of the ceramic coatings carried out by Xray diffractometry (XRD) and scanning electron microscopy (SEM) for the specimens EPP-treated at room temperature for 15 min under a hybrid voltage of 260 DC along with an AC 50 Hz power supply (200 V). Microhardness tests and wear tests were carried out to correlate the evolution of the microstructure and the resulting mechanical properties. Potentiodynamic polarizations and immersion corrosion tests were carried out in 3.5wt% NaCl water solutions under static conditions in order to evaluate the corrosion behavior of the coated samples. The results demonstrate that $NaNO_2$ is proven to be a good nitrogen inducing agent to produce high quality AlON-$Al_2O_3$ ceramic coatings.

• 한국결정학회지
• /
• 제1권2호
• /
• pp.99-104
• /
• 1990

본 연구에서는 고밀도 광원 활용에 의한 유기금속화합물의 광분해 반응을 이용하여 AmBv 형광 전재료의 Hetero-epitaxy를 고찰하였다. 실제로 ArF Excimer laser(파장 193nm)에 의 하여 III족원으로 trlmethylgallium과 V족원으로 Ammonia의 2분자간 광분해 반응을 이용, (001)면 Sapphire 기판상에 증착시켰다. 생성되는 성막상태는 주사식 전자현미경, X-ray 회절 및 전자선 회절법 (RED)에 의하여 평가하였다. Laser광려기 유무에 따라 결정병합 상태 및 결정형태에 현저한 차이를 관찰할 수 있었으며, 특히 결정격자의 방위성에 큰 영향을 주고 있음이 주목되었다. 광원 조사방법은 수직조사에 의한 기판면 여기보다는 수평조사에 의 한 기상 반응물 여기가 더 효과적 이였다. Laser 광여기에 의한 성막층의 격자형성은 다음 과 같은 2가지 Model중 하나로 설명 할 수 있었다. (001)면 Sapphire//wurzite형 GaN의 (001) 면 또는 (001)면 Sapphire//wurzite형 GaN인의 (001) 면 -t Twinned Zincblende형의 GaN(111)면

• 한국재료학회지
• /
• 제17권10호
• /
• pp.560-566
• /
• 2007

AlN plates were fabricated by hot pressing at $1700-1900^{\circ}C$ using yttria and alumina (3 and $10\;{\mu}m$ particle size) powders as additives and characterized: density, thermal conductivity, transverse rupture strength, and grain size measurement by SEM and EDS. Density values of $3.31-3.34\;g/cm^3$ are largely attributed to hot pressing of powder mixtures in carbon mold under $N_2$ atmosphere which caused effective degree of oxygen removal from yttrium-aluminate phase expected to form at $1100^{\circ}C$. The grain size of hot pressed AlN was almost homogeneous, with size approximately from 3.2 to $4.0\;{\mu}m$ after hot pressing. $Al_2O_3$ powder of $3\;{\mu}m$ particle size resulted in better transverse rupture strength and finer grain size compared to $10\;{\mu}m$ $Al_2O_3$ powder. The thermal conductivity of AlN ranged between $83-92.7\;W/m{\cdot}K$ and decreased with $Al_2O_3$ addition. Fine grain size is preferred for better mechanical properties and thermal conductivity.