• 제목/요약/키워드: Alumina filtering

검색결과 5건 처리시간 0.021초

On-line SPE-HPLC Method using Alumina Filtering to Selectively Extract Phenolic Compounds from Environmental Water

  • Lee, Sung-Kwang
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권12호
    • /
    • pp.3755-3759
    • /
    • 2010
  • A on-line SPE (solid phase extraction)-HPLC preconcentration method was developed for the determination of phenolic compounds at trace levels in environmental water sample. XAD-4 and Dowex 1-X8 were used as sorbent in the on-line SPE-HPLC method for the selective enrichment of nine phenolic compounds, which are included in the priority pollutants list of the US EPA. Also alumina prefiltering considerably reduced the amount of interfering peaks due to humic substances that could accumulated due to the preconcentration step and prevent quantification of polar phenolic compounds in environmental water samples. This method was used to determine the phenolic compounds in tap and river water and superiority to the US EPA 625 method in its enrichment factor, pretreatment time, recoveries, and detection limit. The limits of detection were in the range of $0.3-0.9\;{\mu}g/L$ in tap water sample.

알루미나 여과막의 상전이와 미세구조 변화 (Phase Transformation and Microstructural Change of Alumina Membrane)

  • 정훈;최덕균;정덕수
    • 한국재료학회지
    • /
    • 제10권9호
    • /
    • pp.619-623
    • /
    • 2000
  • 알루미나 여과막은 boehmite 분말 (${\Upsilon}-AlOOH$)을 이용하여 졸-겔법으로 준비되어졌다. 제조된 여과막은 상전이 온도와 미세구조 변화를 관찰하기 위해 지지체 없이 형성된 여과막을 제조하였다. 여과 공정의 응용에서 균일한 기공크기와 분포를 제어하는 것이 중용하다. 다공성 담체 위에 형성된 여과막과 다공성 담체 없이 형성된 여과막의 ${\theta}-to\;{\alpha}-AL_2O_3$로의 상전이는 박막 XRD를 이용하여 분석하였고, 미세구조의 변화의 관찰은 주사전자현미경(SEM)을 사용하여 관찰하였다. XRD에서 분석된 결과는 다공성 담체 위에 형성된 여과막이 다공성 담체 없이 형성된 여과막과 비교하여 $100^{\circ}C$ 더 높은 상전이 온도를 가지는 것을 보여주었다. 이런 유사한 효과는 여과막의 미세구조 변화에서도 관찰되었다.

  • PDF

고효율 바이오물질 분리 및 농축을 위한 나노필터소자제작 (Fabrication of Nano-filter Device for High Efficient Separation and Concentration of Biomolecules)

  • 허윤석;최봉길;홍원희
    • Korean Chemical Engineering Research
    • /
    • 제50권4호
    • /
    • pp.738-742
    • /
    • 2012
  • 본 연구에서는 알루미나 나노 템플레이트(anodic alumina oxide; AAO)를 이용하여 신속하면서도 효과적으로 나노입자 및 바이오물질을 분리, 농축할 수 있는 나노필터 소자를 개발하였다. 본 연구에서 사용한 나노필터 소자는 유체의 주입 및 흐름이 가능한 미세유체채널(microfluidic channel)을 PDMS에 패터닝하였다. 위아래로 형성된 PDMS 미세유체채널 사이로, 다양한 크기의 나노 다공을 형성하고 있는 AAO 막을 삽입하여 크기에 따른 나노입자 및 바이오 물질을 분리할 수 있었다. 위아래로 PDMS 유체채널과 AAO 분리막을 집적하고, 최종적으로 아크릴레이트 플락스틱(acrylic plastic)으로 전체 소자를 고정하여 나노필터유체소자를 제작하였다. 완성된 나노필터소자를 이용하여 나노입자의 농축효율 및 은나노입자가 뭉쳐져있는 필터존(filtration zone)으로부터 뎅기 바이러스(dengue virus)를 표면증강라만(surface enhanced Raman scattering)분석법에 의해 검출할 수 있었다.

화학증착 탄화규소 휘스커에 의한 다공성 알루미나 필터의 기공구조 개질 및 특성 평가 (Pore Structure Modification and Characterization of Porous Alumina Filter with Chemical Vapor Infiltration (CVI) SiC Whisker)

  • 박원순;최두진;김해두
    • 한국세라믹학회지
    • /
    • 제41권7호
    • /
    • pp.518-527
    • /
    • 2004
  • 본 연구에서는 다공성 알루미나 기판의 기공 형상 개질을 통해서 필터의 집진 효율, 성능 및 내구성 향상을 위한 공정에 대해서 다루었다. 탄화규소 휘스커를 통한 기공 개질을 위해서 모재의 표면뿐만 아니라 기공 내부에까지 균일한 탄화규소 휘스커를 얻고자 화학 기상 침착법(Chemical Vapor Infiltration: CVI)을 사용하여 실험을 진행하였다. 실험결과 증착 온도와 증착 위치 및 입력 기체비와 같은 공정 조건의 변화에 따라 증착 경향에 확연한 차이를 나타내는 것을 알 수 있다. 다시 말해 첫째, 시편의 관찰 위치가 표면에서 내부로 들어갈수록 “반응 기체의 고갈 효과”로 인해 휘스커가 점점 세선화 되는 것을 볼 수 있으며 두 번째로 증착 온도에 따라서 debris, whisker, film등과 같이 증착물의 형상이 변화하게 된다. 이러한 형상의 변화는 여러 가지 물성의 변화를 가져오게 되는데 그 중에서, film이 증착 되는 경우에는 기판의 강도가 박 115.7% 가량 현저하게 증가하는 반면에 비표면적과 기체 투과율은 감소하게 되지만, 휘스커의 경우에는 강도가 95%, 비표면적은 33.5% 정도가 증가하며 기체 투과율 감소를 최소화 할 수 있다. 따라서 다공성 알루미나 기판 내부 기공에 휘스커를 증착 하면 필터로 인한 압력 저하를 최소화하면서 기공의 크기보다 작은 미세 분진들을 걸러 낼 수 있게 되므로 차세대 필터 재료로 기대된다.

도금욕 부유드로스의 감소 (Reduction of floating Dross in the Zinc Bath)

  • Chang, Seky
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 1999년도 춘계학술발표회 초록집
    • /
    • pp.97-97
    • /
    • 1999
  • Dross formation in the zinc bath is inevitable under any condition as long as coating process on steel strip continues. Thus, bath aluminum and temperature are precisely managed to suppress the increase of dross. Also, excessive dross for normal coating process is generally eliminated physically by bubbling and skimming. Total amount of dross in the bath can be sometimes high enough to cause coating defect. On the other hand, local concentration of dross can make coating defect even with satisfactory level of total amount of dross. Reduction of dross in the bath was attempted by using ceramic foam filter made of mainly alumina. Dross in molten zinc was almost reduced to the levels of solubility of iron and aluminum in molten zinc at $450~460^{\circ}C$. Their solubility levels were confirmed by thermodynamic calculations or DEAL program. Two kinds of filters were tested for dross reduction. One was #20 ppi, porous per inch, and the other #30 ppi filter. Both were effective in reducing the bath dross to the solubility levels at the static state. Bath iron was reduced by 24 wt% and 19 wt% with #20 filter, and by 35 wt% and 29 wt% with #30 filter for GI and GA pot, respectively. Also, ceramic foam filter did not make any harm to the zinc bath composition after filtering test.

  • PDF