• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.2
• /
• pp.85-90
• /
• 2000

Forage sorghum (Sorghum bicolor x S. bicolor) was cultivated for knowing the effect of alum sludge application on its root growth in a mountainous site, Kumsan. And the results obtained are as follows: The available P205 content in the soil seemed to decrease with the advance of level of alum sludge application. And plant P content decreased with the advance of sludge application without phosphate fertilizer. With phosphate fertilizer, root number of the forage was greater than that without the fertilizer. The root growth of forage sorghum was the highest with NPK and the least in control and alum application, and it is not recommended to apply NPK and alum together for the growth of the forage root. (Key words : Root, Sorghum, Mineral, Sludge, Kumsan)

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.715-718
• /
• 2001

This study uses traditional alum coagulation and sedimentation process to treat CMP wastewater from cleaning after polishing. The primary goal is to successfully recycle both solid fines and water for semiconductor manufacturing. Results indicated that CMP wastewater may be successfully treated to recover clean water and fine particles by alum coagulation. The optimum operating conditions for coagulation are as fellowing: alum dosage of 10 ppm, pH at 5, rapid mixing speed at 800 rpm, 5 min rapid mixing time, and long slow mixing time. The treated water with low turbidity and an average residual aluminum ion concentration of 0.23 ppm may be considered for reuse. The settled sludge after alum coagulation contains mainly SiO$_2$particle with a minor content of aluminum (1.7 wt%) may be considered as raw materials for glass and ceramic industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.228-242
• /
• 2019

This research investigated the effect of mordants on the degradation of madder dye in silk when silk was treated by the H2O2/UV condition as a laboratory simulation of burial induced degradation. Alum, iron, and alum/iron composite mordanting methods were applied to silk before dyeing with madder dye. Dye extracted from silk was examined using HPLC-DAD-MS analysis. The abundance of the chromatogram peak at 8.88 min retention time was used as the concentration of alizarin pigment in silk. K/S values, CIE $L^{\ast}a^{\ast}b^{\ast}$ values; in addition, Munsell HVC values were obtained using a spectrocolorimeter. The findings indicated that alizarin degraded most severely in silk mordanted by alum/iron composite mordanting than alum mordanting or iron mordanting. Mordanting with alum alone provided a relatively lower dye fixation at the point of dyeing; however, it provided a better survival of alizarin after 12 hours of degradation treatment.

• Journal of Pharmacopuncture
• /
• v.15 no.2
• /
• pp.11-14
• /
• 2012

Objectives: The purpose of this study was to compare the antioxidant and anti-inflammatory effects of Alum (AL) and Burnt Alum (BAL), which are commonly used as external ointments. Methods: Extracts of AL and BAL were classified into three groups: 20, 50, and $100mg/{\mu}{\ell}$. The cytotoxicity was measured by using MTT assays in human keratinocyte cell line (HaCaT). The anti-oxidant effect was measured by using the DPPH (1, 1-diphenyl-2-picryl-hydrazyl-hydrate) radical scavenger. The anti-inflammatory effect was measured by using the inhibitory efficacy for the amount of nitric-oxide (NO) produced in mouse macrophage cell line (RAW 264.7). Results: BAL showed a higher level of cytotoxicity than AL. The AL groups showed a concentration-dependent scavenging effect on DPPH radicals, but no significant relevance was found. The BAL groups showed a concentration-dependent scavenging effect on DPPH radicals. The scavenging effects of the BAL groups were almost insignificant, but the values for the 20, 50, and $100{\mu}g/m{\ell}$ trials were different. The BAL groups showed significant concentration-dependent inhibitory effects on NO production, but the AL groups did not. Conclusions: AL showed an anti-oxidant effect more efficiently than BAL did, which demonstrated a superior anti-inflammatory effect. Therefore, for external usage, AL must be distinguished from BAL.

• Membrane and Water Treatment
• /
• v.12 no.2
• /
• pp.83-93
• /
• 2021

In this study, defluoridation efficiency by aluminium sulphate (alum) and polyaluminium chloride (PACl) were compared for recommended Nalgonda dose (100%) and 80% of this dose in both batch and continuous modes. The residual turbidity was found to be higher in case of alum as compared to PACl with 80% dose representing lesser efficient settling of suspensions, which primarily comprise alumino-fluoro complexes that result in high residual aluminium in the treated water and this was confirmed by TEM and Zeta analysis. Moreover, the application of PACl also resulted in much lesser addition to the TDS and also required lesser lime for pH compensation due to its lower acidity. Hence this reduced dose was recommended for defluoridation. It was also observed that in case of alum, residual aluminium in treated water was 0.88 mg/L (100% dose) & 0.72 mg/L (80% dose) and in case of PACl, it was 0.52 mg/L(100% dose) & 0.41 mg/L(80% dose). After subsequent microfiltration, residual aluminium was 0.28 & 0.21 mg/L for 100% & 80% dose respectively and in case of alum and in case of PACl, it was 0.16 & 0.11 for 100% & 80% dose respectively, which conform to the Al standards(<0.2 mg/L).

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.480-493
• /
• 2019

In this study, the method for processing glue and glue-alum sizing from the dancheong ground treatment was evaluated with respect to weather resistance, and its effect on the conservation of dancheong was analyzed. Viscosity and pH of the glue and glue-alum specimen were measured and classified into three categories(none layer, glue layer, and glue-alum layer), which were further classified according to low concentration(four times for 2%) and high concentration(once for 10%). The base layer formation was subsequently classified into three categories based on pigment adoption, namely, Noerok(celadonite), Seokganju(terra rossa), and Jangdan(red lead). The completed specimen was subjected to a changing-environment experiment for evaluating weather resistance and observing the surface. Color variations were analyzed before and after the experiment. The results indicate that glue-alum sizing comprising 5% alum or 7% alum has strong acidity that can affect the life of dancheong, and the high level of 7% alum makes it difficult to create a solid coating layer. After ultraviolet irradiation, the specimen with 7% alum changes its color to yellow. Furthermore, after moisture absorption and drying, cracks can be observed on the entire specimen surface that corroborate the physical change. Additionally, gas-based corrosion causes marginal surface changes. Hence, the formation of a stable coating layer can be achieved by incorporating a low concentration glue solution that is almost neutral, and the application of glue-alum sizing having 2% concentration can aid in the conservation of dancheong.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.86-88
• /
• 2001

An experiment was conducted to determine how broiler performance, feces and litter concentration of N can be maintained and whether NH3 gas concentration can be reduced with reducing dietary CP, adding ALUM(AL2(SO4)3.14H20) in litter and supplementing with amino acid and vitamin D in feed. The experiment was divided into a starter period(1 to 21d) and grower period(22 to 42d), each having three different CP with 90 birds per treatment of 3 replications. The CP treatments consisted of a mean CP of 23.0(control 71), 20.4 (72) and 18.0 (73) % for starter and 21.0(control 71),19.3 (72) and 17.0 (73) % for grower, respectively, but with similar amino acid levels as the control. Alum was mixed in each treatment except control treatment with 200g in kilogram litter(rice bran) weight. Results suggested that reducing CP below control in the diets fed during 3wks and 6wks slightly increased feed gain and slightly decreased feed intake and weight gain. However, there were no significant difference among treatments. Reducing CP caused NH3 gas concentration to decline by 74.8 - 80.9% when Alum was mixed in litter(P < 0.05). Litter N concentration did not show any difference(P > 0.05) among treatments. These results suggest that dietary manipulation with adding Alum in litter show for significant reducing NH3 gas concentration while maintaining acceptable Production performance from broiler.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.37-43
• /
• 2006

The coagulation efficacy of Al-based coagulants (such as Alum, PACS, and PACC) was investigated to ascertain removal efficiencies of turbidity and phosphate with variation of solution pH, coagulant dosages, and pre-dilution ratios. The efficacy of Al-based coagulants was maximized in the pH range of 6~9. Under the initial condition of pH 8, $10mg/L\;{PO_4}^{3-}$, and 20 NTU, Al-based coagulants exhibited a similar efficacy in the removal of turbidity, whereas the removal efficiency of phosphate was clearly dependent on the basicity of coagulants: Alum (0%) > PACS (45~50%) > PACC (70%). At high initial turbidity of 100 NTU, polymeric coagulants, such as PACS and PACC, exhibited a higher removal efficiency of turbidity compared to Alum. In comparison to direct injection of coagulants at low initial turbidity (20 NTU), 500~2000 times pre-diluted Alum, exhibited reduced coagulation efficacy; however, removal efficiencies of turbidity and phosphate increased with the increase of retention time. Pres-diluted PACC exhibited the enhanced coagulation efficacy followed by silght decrease of the removal efficiencies with increase of the retention time. At high initial turbidity of 100 NTU, pre-diluted Alum and PACC exhibited higher removal efficiencies of turbidity and phosphate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.1
• /
• pp.1-12
• /
• 1999

The objective of this study is to improve the function of an artificial culture soil which was mixed mainly with alum sludge. The artificial culture soil was more efficient than the commercial culture soil for the growth of perennial ryegrass and bush clover. Artificial culture soil was prepared paper sludge(40%), alum sludge(30%), sewage sludge(20%), and compost (10%). This artificial culture soil had no adverse effect on phytotoxicity tests. The alum sludge gives some water holding capacity and cohesion strength to the soil enought to require no other addition of adhesive agents. The leaching of aluminum from the alum sludge was negligible even at very low pH(=2) due to the mixed compost.

• Journal of Korean Society on Water Environment
• /
• v.21 no.5
• /
• pp.458-463
• /
• 2005

Considering the characteristics of a filtration bio-reactor equipped with a mesh filter module which can effectively maintain high concentration of biomass and enhanced solid-liquid separation performance, the hybrid process of filtration bio-reactor combined with coagulation was investigated to get improved filtration characteristics as well as water quality in this work. Two bio-reactors (Run-1 & Run-2) were operated under the following conditions: working volume of 25 L, continuous loading of a synthetic wastewater (BOD: 200 mg/L, T-N: 50 mg/L, T-P: 5 mg/L), where an appropriate amount of alum ($Al_2(SO_4)_3{\cdot}18H_2O$) was added once a day into the reactor (Run-2). In the system without using a alum (Run-1), the clogging of mesh filter module was observed two times through 85 days of whole operation. Meanwhile, the filter module did not clog even at higher MLSS concentration (6,000~12,000 mg/L) and the stable filtration (0.7 mid) was continued in the case of using a alum. Due to the stable formation of cake layers, BOD and SS were shown below 6 and 3 mg/L, respectively. T-P and pH of the effluent were changed because of the intermittent addition of the alum. In the case of Al/P=2.5, the average T-P removal efficiency per day was 85.2% and the average T-P concentration of the effluent was 0.3 mg/L. However, the removal efficiency of phosphate was influenced by pH in the reactor.