• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.59-62
• /
• 2004

Affinity membranes have emerged principally to overcome the problems of limited specificity experienced with membranes that operate purely on a sieving mechanism and as an alternative to the traditional affinity resins. It is a logical expectation that affinity membranes might combine the outstanding selectivity of affinity resins with the high productivity associated with filtration membranes.(omitted)

• Geomechanics and Engineering
• /
• v.36 no.4
• /
• pp.329-341
• /
• 2024

Retaining structures are one of the most important elements in the stabilization of excavations and slopes in various engineering projects. Mechanically stabilized earth (MSE) walls are widely used as retaining structures due to their flexibility, easy and economical construction. These benefits are especially prominent for projects built on soft and weak foundation soils, which have relatively low resistance and high compressibility. For high retaining walls on weak foundations, conventional design methods are not cost-effective. Therefore, two alternative solutions for different foundation weakness are proposed in this research: optimized multi-tiered MSE walls and single tier wall with foundation improvement. The cost optimization considers both the construction components and the land price. The results show that the optimal solution depends on several factors, including the foundation strength and more importantly, the land price. For low land price, the optimized multi-tiered wall is more economical, while for high land price (urban areas), the foundation improvement is preferable. As the foundation strength decreases, the foundation improvement becomes inevitable.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.1-12
• /
• 2016

The industry producing the parts of aircraft engines is a traditional order-made system with highly variety and small quantity, and the manufacturing system is the typical job shop with identical or non-identical multiple machines in a workstation. Furthermore, there are many alternative operations and alternative machines allowed in machining processes, and tremendous routings and assembly operations should be considered. Usually simulation is the most efficient technology to analyze such a complex system, and high modeling skills are required for developing the simulation models. In this paper, a case study on a company which produces the parts of aircraft engines is introduced, specially focused on simulation modeling methodologies for the complex system.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.2
• /
• pp.53-64
• /
• 2020

We provide one of the first investigation on the impact of the degree of total leverage to the dividend policy of bank. We use a large sample of US bank holding companies from 2000:Q1 to 2017:Q4 to shed light our research question. Our empirical analysis provides consistent evidence that banks with high degree of total leverage (i.e. banks with a relatively high fixed-to-variables costs) are less likely to pay dividends, and they spend a lower fraction of incomes to pay back shareholders, suggesting a higher conservatism in dividend policy of banks subject to high degree of total leverage. The evidence remains unchanged with alternative econometric approaches, alternative measures of dividend policy and degree of total leverage. We further document that this higher conservatism is strengthened for a sample of banks with low franchise value during the financial crises. Our result suggests that the conservatism in dividend policy of banks with high degree of total leverage seems to be related to the precautionary motives aimed at preserving corporate resources under financial distress. Our study contributes to the literature of cost structure and dividend policy by pointing out that the impacts of the degree of fixed-to-variable expenses to dividend policy are extended to the case of banks.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1065-1066
• /
• 2008

Printed thin-film transistors (TFTs) have received profound interests as an alternative to their silicon counterparts for use in fabricating next-Gen microelectronics by virtue of projected low manufacturing cost and certain salient features (e.g., thin and lightweight characteristics, structural flexibility, etc.) that printed TFTs bring to device architecture. The economic advantages stem from engaging low-cost printing techniques (e.g., screen printing, gravure, flexography, etc.) for deposition and patterning in place of traditionally costly high-vacuum, high-temperature photolithographic processes. To render printing TFTs possible, solution processable materials are necessary.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.107-115
• /
• 2015

The study targeted Japanese employees who have visited hospital for spinal disorder. The study analyzed work environment and pain relief methods of work-related back pain patients, and the relationship between back pain and other body parts. The purpose of this study was to provide draw up measures for patients with back pain and to provide basic data for the sustainable prevention program. The study result of back pain, in other words, employees suffering from lumbago, had disparity between occupations; the highest number of patients were made up of 16-years or above long-serving employees, and below 5-years of short-serving employees. There were more patients complaining of chronic lumbago than acute lumbago, and patients recognized poor posture as the primary cause of lumbago. Furthermore, 99.5% of spinal disorder patients complain back pain, 23.2% use only alternative therapy, and 15.2% visit clinic and hospital with alternative therapy. Patients showed pain reduction and high satisfaction after using alternative therapy. The study targeted Japanese employees where complement therapy is more generalized than that of Korea, and thus there should be multilateral management programs provided in Korea as well.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1277-1281
• /
• 2020

A novel ceramic Gas Electron Multiplier (GEM) has been developed to meet the demand of high counting rate for the neutron detection which is an alternative to ³He-based detector at China Spallation Neutron Source (CSNS). An experiment was performed to measure the neutron transmittance of ceramic-GEM and FR4-GEM at the small angle neutron scattering (SANS) instrument. The result showed the ceramic-GEM has higher transmittance and less self-scattering especially for cold neutrons. One single ceramic GEM could give a gain of 10²-10⁴ in the mixture gas of Ar and CO₂ (90%:10%) and its energy resolution was about 27.7% by using ⁵⁵Fe X ray of 5.9 keV. A prototype has been developed in order to investigate the performances of the ceramic GEM-based neutron detector. Several neutron beam tests, including detection efficiency, spatial resolution, two-dimensional imaging, and wavelength spectrum, were carried out at CSNS and China Mianyang Research Reactor (CMRR). The results show that the ceramic GEM-based neutron detector is a good candidate to measure the high intensity neutrons.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.7
• /
• pp.980-991
• /
• 1998

In this study, nucleate pool boiling heat transfer coefficients of alternative refrigerants on a plain, low fin, and two enhanced tubes were measured and compared against each other. To obtain data at conditions similar to the actual evaporator, a fluid heating method was employed instead of an electric heating method in the experiments. R123, R134a, R22 and R410a were used as working fluids and data were taken at 7 deg.C ar heat fluxes of 20 ~ 100 kW/m$\^$2/. Comparison of the plain tube data against some correlations showed that the simplest correlation of Cooper based on reduced pressure predicted the data for all fluids tested with a 10% deviation. For all refrigerants, enhanced tubes composed of subsurface and subtunnels, especially Thermoexcel-E tube, showed the highest heat transfer coefficients among the tubes tested with one exception that the low fin tube's performance was better than those of enhanced tubes for high vapor pressure fluid such as R410a at high heat flux. Finally, a low fin and enhanced tubes showed higher heat transfer enhancement for low vapor pressure of R123 than for high vapor pressure fluisd. For R123, the enhancement factors for Turbo-B and Thermoexcel-E tubes were 2.8 ~ 4.8 and 4.6 ~ 8.1 respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.377-377
• /
• 2016

Under nanosecond-pulsed laser irradiation, light-absorbing thin films have been used for photoacoustic transmitters for ultrasound generation. Especially, nanostructured absorbers are attractive due to high optical absorption and efficient thermoacoustic energy conversion: for example, 2-dimensional (2-D) gold nanostructure array, synthetic gold nanoparticles, carbon nanotubes (CNTs), and reduced graphene oxides. Among them, CNT has been used to fabricate a composite film with polydimethylsiloxane (PDMS) that exhibits excellent photoacoustic conversion performance for high-frequency, high-amplitude ultrasound generation. Previously, CNT-PDMS nanocomposite films were made by using a high-temperature chemical vapor deposition (HTCVD) process for CNT growth. However, this approach is not suitable to fabricate large-area CNT films (>several cm2). This is because a chamber dimension of HTCVD is limited and also the process often causes nonuniform CNT growth when the film area increases. As an alternative approach, a solution-based process can be used to overcome these issues. We develop PDMS composite transmitters, based on the solution process, using several nanostructured light-absorbers such as CNTs, nanoink powders, and imprinted regular arrays of gold nanostructure. We compare fabrication processes of each composite transmitters and photoacoustic output performance.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.3
• /
• pp.220-237
• /
• 2020

Modern electrochemical energy devices involve generation and reduction of fuel gases through electrochemical reactions of water splitting, alcohol oxidation, oxygen reduction, etc. Initially, these processes were executed in the presence of noble metal-based catalyst that showed low overpotential and high current density. However, its high cost, unavailability, corrosion and related toxicity limited its application. The search for alternative with high stability, durability, and efficiency led scientists towards carbon nanoparticles supported catalysts which has high surface area, good electrical conductivity, tunable morphology, low cost, ease of synthesis and stability. Carbon nanoparticles are classified into two groups based on morphology, one and zero dimensional particles. Carbon nanoparticles at zero dimension, denoted as carbon dots, are less used carbon support compared to other forms. However, recently carbon dots with improved electronic properties have become popular as catalyst as well as catalyst support. This review focused on the recent advances in electrocatalytic activities of carbon dots. The mechanisms of common electrocatalytic reactions and the role of the catalysts are also discussed. The review also proposed future developments and other research directions to overcome current limitations.