• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2014

The vast stores of biomass available in the worldwide have the potential to displace significant amounts of petroleum fuels. Fast pyrolysis of biomass is one of several paths by which we can convert biomass to higher value products. The wood pyrolysis oil (WPO) has been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of WPO in a diesel engine requires modifications due to low energy density, high water contents, high acidity, high viscosity, and low cetane number of the WPO. One possible method by which the shortcomings may be circumvented is to co-fire WPO with other petroleum fuels. WPO has poor miscibility with light petroleum fuel oils; the most suitable candidates fuels for direct fuel mixing are methanol or ethanol. Early mixing with methanol or ethanol has the added benefit of significantly improving the storage and handling properties of the WPO. For separate injection co-firing, a WPO-ethanol blended fuel can be fired through diesel pilot injection in a dual-injection dieel engine. In this study, the performance and emission characteristics of a dual-injection diesel engine fuelled with diesel (pilot injection) and WPO-ethanol blend (main injection) were experimentally investigated. Results showed that although stable engine operation was possible with separate injection co-firing, the fuel conversion efficiency was slightly decreased due to high water contents of WPO compare to diesel combustion.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.6
• /
• pp.654-660
• /
• 2018

The dependence on global fossil fuels has been gradually reducing all over the world. Some countries which recognized the important of environmental values were joining to carry out international GHG goals. Our country has also participated with high targets (37% reduction compared to BAU 2030 years). So we need to supply materials of lower GHG value such as a bio-diesel. Bio-alcohol is one of the similar bio-fuels that can be reducing GHG. A lot of countries had tried to commercialize through various R&D for bio-alcohol. In this study, we analyzed the fuel characteristics of bio-alcohol fuel produced by domestic technology. And we evaluated a possibility to use as vehicle fuel through mixing of bio-alcohol and gasoline. The mixed fuels were satisfied with 2.3 wt% of oxygen content that is standard of the petroleum and petroleum alternative fuel business Act. We tried to evaluate a emission characteristic of vehicle by mixed fuel. In accordance with the results we tried to find a correlation between fuel and emission.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.286-293
• /
• 2020

In this study, we tried to verify the correlation of the amount of combustible industrial by-products, household waste used as fuels on cement sintering process and the amount of NOx, and CO, harmful components in the exhaust gas. The analysis uses coal as natural fuel, soft plastics (plastics with properties that tend to be scattered by wind, such as vinyls), hard plastics (plastics with properties that are not scattered by wind, such as PETs, wate rubbers), and reclaimed oils as alternative fuels. Utilizing the response surface analysis (RSM) technique using the process data of 2019, such as the fuel input and combustion temperature of a domestic A cement manufacturer's sintering facilities as independent variables, and the NOx, and CO emissions to the stack as dependent variables. Correlation was analyzed. As a result, it was confirmed that the impact on the emission material differs for each waste. In particular, it was analyzed that the hard plastics increase the CO emission but have an excellent effect of reducing NOx.

• Explosives and Blasting
• /
• v.27 no.2
• /
• pp.56-60
• /
• 2009

In view of physics, energy is defined as the ability to work. The use of natural gas and nuclear power have been increased since 1980s to replace fossil fuels such as coal and petroleum. Recently, solar energy, wind power, tidal power, and geothermal energy have been considered as promising alternative energy sources to overcome environmental pollution. However, their energy efficiencies are much lower than those of chemical energies such as nuclear power, explosive, and petroleum gas. In this study, the present situation of the green energy was reviewed to seek out the way to overcome the limit of the environmental (alternative) energy. Also, purification, application and development trend of the highly efficient alternative energy sources were investigated.

• International Journal of Railway
• /
• v.5 no.3
• /
• pp.117-123
• /
• 2012

According to the Intergovernmental Panel on Climate Change, combustion of petroleum-based and other fossil fuels results in the increasing atmospheric concentrations of $CO_2$ and other greenhouse gases (GHG's) and is a major contributing factor to global warming. This paper includes estimates of the energy and petroleum use and the GHG emissions caused by the transportation sector. It then examines the extent to which diversions to alternative modes may be possible. Estimates are made of the potential reductions in energy and petroleum use and GHG emissions resulting from diversions from conventional modes, to both low-speed urban and high-speed intercity maglev vehicle trips based on "well-to-wheel" (i.e. total-fuel-cycle) calculations.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.712-714
• /
• 1998

Fuel cell systems offer high energy efficiencies for transportation application. In addition, they can use alcohols and alternative fuels as the fuel, while producing little or no noxious emissions. Fuel cell-powered vehicles should be competitive in performance characteristics and in capital and maintenance costs with internal combustion engine vehicles. The objective of the present study is to design a fuelcell/battery powered vehicles to analyze technical feasibity.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.264-266
• /
• 1997

Fuel cell systems offer high energy efficiencies for transportation application. In addition, they can use alcohols and alternative fuels as the fuel, while producing little or no noxious emissions. Fuel cell-powered vehicles should be competitive in performance characteristics and in capital and maintenance costs with internal combustion engine vehicles. The objective of the present study is to design a fuel cell-powered passenger car to analyze technical feasibility.

• Journal of Power System Engineering
• /
• v.8 no.2
• /
• pp.18-23
• /
• 2004

Recently many researchers have been studying the development of alternative energy due to serious environmental pollution and drying up fossil energy. Among various alternative fuels, authors investigated the physical and combustion characteristics of the bio diesel fuel(BDF) which was made from the wasted vegetable oil. In this study, PXI and LabVIEW, which is a novel measuring instrument and online analysis, was used to investigate the combustion characteristics of BDF in a DI diesel engine.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.1-6
• /
• 2003

Natural gas is one of the promising alternative fuels because of the abundant deposits and the cleanness of emission gas. CNG has a lot of merits except lower burning speed has a slow disadvantage. One way to overcome the disadvantage is to raise a turbulence intensity. We give various intake for changing turbulence intensity in the cylinder by three kinds of swirl control valve with a way to raise a turbulence intensity. In the present study, a $1.8\ell$ conventional gasoline engine is modified to use a CNG as a fuel instead of gasoline. We try to virify combustion and emission characteristics in each engine parameters. Parameters of experimentation are equivalence ratio, spark timing and intake flow change. The results of this study are as swirl flows. In the case of adding swirl flow, burning speed and torque are increased. But NOx and THC concentration are increased a little respectively.

• Hwankyungkyoyuk
• /
• v.10 no.2
• /
• pp.325-338
• /
• 1997

Review of the global change in various energy usages and resulting environmental impacts were made in terms of population increase, economic development and energy consumption. Greater use of fossil fuels in past couple of centuries give rise to acid rain and gradual climate changes mainly due to Green House inducing gases emissions from fossil fuel combustion. In view of the forthcoming Kyoto conference in December, various alternative options were assessed. To cope with rapidly developing robust Korean economy, the alternative energy options for the sustainable development in 21st Century would be the wider use of Nuclear Energy in parallel with constrained use of fossil fuel and renewable energy development. However there are many hurdles to overcome. One of the most important element is to improve public acceptability of those alternatives. Since public acceptance depend heavily upon individual perception on specific energy technology applications, the basic energy technologies education from primary up to high school education and the related curriculum organization is important. The suggested improvement in education for Nuclear Energy Application was made on the basis of advanced industrial countries with substantial Nuclear Energy Application programs.