• 여성건강간호학회지
• /
• 제2권2호
• /
• pp.160-181
• /
• 1996

This study measures the subjectivity(opinions, attitudes) of college women. Identifying the schemata (structure of subjectivity) would be a basic step for the sexual educational program and alternative strategies of sexual harassment. More concretely, those following research questions are focused. 1) The subjective schemata : find out typologies based on the opinions and attitudes toward the sexual harassment. 2) Applications : describe the characteristics of each type. 3) Alternatives : provide suggestion of the alternative strategies for solving the sexual harassment problems of women. Q-Methodological method was used for that purpose. As the research method, Q-statements were collected preliminary to the study of through indepth interviews and a literature review. For the study 34 Q-statements were selected. There were 48 college women as subjects for the research. The 48 college women sorted the 34 statements using the principle of Forced Normal Distribution. The principle of Forced Normal Distribution, which has nine scales to measure the individual opinions, was called. Q-Factor Analysis by using PC Quanl Program to supply the material. According to the outcomes of this study, there were four categories of special opinion about the sexual harassment in college women. The first type is called Blaming offenders type. This type is to hold offenders accountable. The second type is called Preventive alternative strategies type. This type is to take preventive measures. The third type is called Blaming social structure type. This type is to hold the society as a whole responsible. The fourth type is called Blaming victims type. This type is to hold victims accountable. As a result, We not need to change our perspective of women's health problems and need to develop realistic way of caring those women in suffering women's problems. Followings are to be suggested of the alternative strategies for solving the sexual harassment problems. Finally, The result of the study will provide us the clue for developing the sexual educational program and alternative strategies for women's sexual harassment problems.

• 성인간호학회지
• /
• 제16권3호
• /
• pp.432-441
• /
• 2004

Purpose: This descriptive survey was conducted to investigate out the utilization of alternative complementary remedies for stroke patients. Method: The subject for this study were 194 patients, selected from inpatients department of 11 major medical center at Busan and Ulsan. Data were collected from August 19th to November 12th, 2002 through interview schedule designed by the investigator. Data was analyzed with frequency, percentage, and ${\chi}^2$-test by using SPSS Win 10.0. Results: 71.6% of objects has used alternative complementary remedies. The use of alternative complementary remedies according to disease-related features was statistically significant in concurrent diseases(${\chi}^2=15.03$, p=0.001), rehabilitation treatment(${\chi}^2=6.341$, p=0.012) and the level of ADL(${\chi}^2=19.63$, p=0.000). The most frequently used therapies were diet and nutrition(31.8%). The patients with less than 3month onset and in the mid-period of treatment frequently used remedies. The reason for using remedies were the belief in it's effects on treatment, but most patients responded was not effective(30.9%) or not much improvement after using remedies. Most of the patients were recommended to use remedies by their neighbors(27.3%) and family members(25.2%). The family members were most supportive in therapy(56.1%). The 28.1% of patients responded that the remedies were effective in promoting blood circulation and 95% of the patients had not experienced side effects. Conclusion: These results could be the basic material in developing nursing intervention for cerebral apoplexy patients.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.27-33
• /
• 2008

Most of existing repair materials have some shortcomings such as brittle fracture, imperfect interface bonding and marked difference in modulus of elasticity compared with the structures. These problems make their repair inefficient. Some researches on using a fiber-reinforced mortar as an alternative to enhance the efficiency have been carried out recently. This paper presents the results of an experimental study on the performance of sprayed PVA fiber-reinforced mortar as a repair material. We evaluated its mechanical properties, durability and strengthening effect. This study shows that the sprayed PVA fiber-reinforced mortar is remarkably effective as a repair material.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.95-99
• /
• 2001

Cu is considered as a promising alternative interconnection material to Al-based interconnection materials in Si-based integrated circuits due to its low resistivity and superior resistance to the electromigration. New humping and UBM material systems for solder flip chip interconnection of Cu pads were investigated using electroless-plated copper (E-Cu) and electroless-plated nickel (E-Ni) plating methods as low cost alternatives. Optimally designed E-Ni/E-Cu UBM bilayer material system can be used not only as UBMs for solder bumps but also as bump itself. Electroless-plated E-Ni/E-Cu bumps assembled using anisotropic conductive adhesives on an organic substrate is successfully demonstrated and characterized in this study

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.855-862
• /
• 1992

Thermoelectric power, electrical conductivity and Hall effect were measured, as functions of temperature in the range of 100 to 600 K, on polycrystalline Bi4/3Sb2/3Te3 which had been prepared via uniaxial hot-pressing at different temperatures in the range of 373 K to 773 K, aiming at searching a profitable processing route to a polycrystalline thermoelectric material, a promising, viable alternative to a single crystalline one. It was found that, with increasing temperature of pressing under a fixed pressure, the material, normally a p-type prior to being hot-pressed, underwent a transition to n-type. This transition was confirmed to be due to plastic deformation during hot-pressing and interpreted as being attributed to the change of the major ionic defect BiTe' into TeBi˙at temperature high enough for structure elements mobility. Thermoelectric figure-of-merit of the hot-pressed material was discussed in connection with the p-n transition in addition to microstructure.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.163-169
• /
• 2001

The solution of two-dimensional deflection of circular wavy reinforcing fiber elastics was obtained for one end clamped boundary under concentrated load condition. The fiber was regarded as a linear elastic material. Wavy shape was described as a combination of half-circular arc smoothly connected each other with constant curvature of all the same magnitude and alternative sign. Also load direction was taken into account. As a result, the solution was expressed in terms of a series of elliptic integrals. These elliptic integrals had two different transformed parameters involved with load value and initial radius of curvature. While we found the exact solutions and expressed them in terms of elliptic integrals, the recursive ignition formulae about the displacement and arc length at each segment of circular section were obtained. Algorithm of determining unknown parameters was established and the profile curve of deflected beam was shown in comparison with initial shape.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.127-130
• /
• 2003

Electrolytic polishing is the anodic dissolution process in the transpassive state. It removes non-metallic inclusions and improves mechanical and corrosion resistance of stainless steel. Electrolytic polishing is normally used to remove a very thin layer of material from the surface of a metal object. An electrolyte of phosphoric, sulfuric and distilled water has been used in this study. In the low current density region, there can be found plateau region and material removal process and leveling process occur successively. In this study, an electrochemical polishing process using pulse current is adopted as a new electrochemical polishing process. In electrochemical machining processes, it has been found that pulse electrochemical processes provide an attractive alternative to the electrochemical processes using continuous current. Hence, this study will discuss the electrochemical polishing processes in low current density region and pulse electrochemical polishing.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1106-1116
• /
• 1994

Leak Before Break(LBB) design concept is applied to piping systems of newly-built Yonggwang 3, 4 nuclear generating stations as a design alternative to the provision of pipe whip restraints, in recognition of the questionable benefits of providing such restraints. The objective of this paper is to evaluate the material properties (tensile and fracture toughness) of SA312 TP316 stainless steel and their associated welds manufactured for shutdown cooling system of Yonggwang 3, 4 nuclear generating stations. Effect of various parameters such as specimen orientation, test temperature, welding on material properties were examined.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.279-284
• /
• 2007

Elasto-forming has been dedicated to specific and limited production. Today, using enhanced pad materials, it has become an efficient and economical process alternative for low and medium volume metal-forming production. The non-linear properties of elastomer which are described as strain energy function are important parameter to design and evaluate of elastomer component. These are determined by material tests which are uni-axial tension and bi-axial tension. In order to investigate the design paramerer, Finite element analysis was carried out for elasto-forming process.

• 한국경영과학회지
• /
• 제26권1호
• /
• pp.71-85
• /
• 2001

This paper considers a cost model for a U-shaped manufacturing cell formation which incorporates a required number of machines and various material flows together under multi-part multi-cell environment. The model is required to satisfy both the specified operation sequence of each part and the total part demand volume, which are considered to derive material handling cost in U-shaped flow line cells. In the model several cost-incurring factors including set-up for batch change-over, processing time for operations of each part, and machine failures are also considered in association with processing load and capacity of each cell. Moreover, a heuristic for a good machine layout in each cell is newly proposed based on the material handling cost of each alternative sequence layout. These all are put together to present an efficient heuristic for the U-shaped independent-cell formation problem, numerical problems are solved to illustrate the algorithm.