• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.111-114
• /
• 2003

In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature ($T_{c,zero}$ : 90 K) and critical current density ($2354\;A/cm^2$). Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.135-140
• /
• 2020

An experimental study was conducted using the tracking wheel test (IEC 62217) method for evaluating the performance of insulator materials, in particular ethylene propylene diene monomer (EPDM) and silicone rubber. In addition, we studied the tracking characteristics resulting from applying the same method for the shape of the insulator housing, that is, the performance of regular and alternating sheds. The evaluation parameters were leakage current, surface characteristics, SEM, EDX, hydrophobicity, and temperature distribution; likewise, we applied the commercial frequency dry (and wet) flashover voltage test. We found that the regular shed had a greater leakage current than the alternating shed and that the recovery of the hydrophobicity in terms of rest time was greater than that of the EPDM in terms of leakage current. All of the regular-shed insulators of silicone rubber had tracking traces and choking on the sheath parting line, while the alternating shed showed only choking at the interface but no tracking traces. Therefore, it can be concluded that the commercial frequency wet flashover voltage of the silicone rubber with regular shed before and after the tracking wheel test is higher than that of the alternating shed.

• Korean Journal of Weed Science
• /
• v.31 no.1
• /
• pp.78-83
• /
• 2011

This study was conducted to evaluate germination rate of Vicia tetrasperma and V. hirsuta as affected by storage duration, temperature, and light. All seeds of both species were gathered from Dangjin, Chungnam in the late June of 2004 and 2005, stored for a certain period of time, and then exposed for 20 days to the alternating temperatures ($15/^{\circ}C,\;20/10^{\circ}C,\;25/15^{\circ}C$, and $30/20^{\circ}C$) for evaluating the germination rate. Both 2004 and 2005, two species stored at room temperature for 3 months had germination rates less then 30% with applying various alternating temperatures for 20 days although the highest germination rate was obtained with $25/15^{\circ}C$ treatment. V. tetrasperma at 12 month storage after seed gathering in 2005 had 82% of germination rate with $25/15^{\circ}C$ treatment and showed the increased rate as time passed. V. hirsuta at 6, 9, and 12 month storage after seed gathering in 2005 ranged, however, from 33 to 53% of the germination rate at alternating temperature treatments for 20 days and did not seem to be affected by the elapsed time of the storage. Storage at room temperature was more effective for increasing germination rate of both species compared to those of the storage at low temperature. The germination rate of both species was not significantly affected by either exposure of light or short period of high temperature.

• Economic and Environmental Geology
• /
• v.17 no.2
• /
• pp.141-147
• /
• 1984

For the discussion of palaeogeomagnetic field direction and the movement and rotation of geotectonic blocks it is prerequisite to eliminate the secondary remanent magnetization component out of the NRM vector of given rock samples. Among various techniques alternating field and thermal demagnetization methods are most easily applicable and most widely used ones. Physical principle underlying these methods is the concept of relaxation time: Either with an action of external magnetic field or with an elevated temperature relaxation time of magnetic minerals can be drastically shortened. It has been furthermore shown experimentally that the secondary remanent magnetization can be more easily demagnetized than the primary remanent magnetization. Through careful stepwise demagnetization it should also be possible to discriminate the kind of various remanent magnetizations. In addition to the introduction to the underlying physical principles and experimental results of the alternating field and thermal demagnetization this paper gives various practical tips in earring out the demagnetization experiments. Each alternating field and thermal demagnetization instrumentation which is easily adaptable to domestic palaeomagnetic laboratories is also introduced. This paper provides a compact and practical introduction to the methods in palaeomagnetism and would be of interest to present workers and to those who want to embark on research in this field.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.577-582
• /
• 2007

The plasma display panel is an image expression display using gas discharge plasma. However, gas discharge characteristics vary with temperature as gas discharge is sensitive to temperature. The discharge time lag extends a lot in low temperature and it is known as the cause which hinders high speed addressing which is essential for the size enlargement of the panel. Accordingly this research aims at identifying the temperature-dependent discharge characteristic. The lower temperature becomes, the longer addressing discharge time lag becomes. Particularly the statistical time lag extends much in low temperature. The increasing of electric field shortens discharge time lag in low temperature. Also, when priming particles are sufficiently supplied, stable discharge can be performed regardless of the influence of temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1921-1924
• /
• 2007

In order to measure the superconducting transition temperature, the critical current and the alternating current(AC) loss on short samples of high temperature superconductor, a cryocooler cooled cryostat has been designed and built. Two closed-cycle coolers provide cooling with an ultimate sample temperature below 16K. Temperature regulation is provided by 50W of electrical heater that opposes the cooling power from the cold heads. Temperature control feedback is by means of a cernox temperature sensor co-located with the heaters on the second stage of the cold head. Additional temperature sensors are located on the sample mount(B1), on the CVI cold head(B2) and on the Dakin cold head(B3). AC losses on the sample high temperature superconductor were measured at 30K so that the developed device performance was evaluated. In this paper, the design, fabrication and test results on the cryocooler cooled cryostat are presented.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.2
• /
• pp.70-77
• /
• 1999

This study was carried out to suggest an effective method for the rehabilitation of Close-to-Nature River and artificial wetland. The results on the revegetation methods by seeding and sodding of Phragmites japonica, Miscanthus sacchariflorus, Themeda triandra, and Pennisetum alopecuroides were summarized as follows. Seed germination of Phragmites japonica was 76.3% at $30^{\circ}C$, that of Miscanthus sacchariflorus was 68.7% at $20^{\circ}C$, that of Themeda triandra germinated 52.3% at $25^{\circ}C$, $30^{\circ}C$ constant temperature and that of Pennisetum alopecuroides germinated 86.7% at $30^{\circ}C/20^{\circ}C$ alternating temperature. Seed germination of Pennisetum alopecuroides exceeded 80% at $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$ constant temperature and $25^{\circ}C/15^{\circ}C$ alternating temperature. At 60 days after seeding, the ground coverage of Phragmites japonica, Miscanthus sacchariflorus, Themeda triandra, and Pennisetum alopecuroides reached 81%, 81 %, 74%, and 86% respectively in the soil media of vermiculite and peatmoss(1 : 1 by volume). In the results of sod experiment, Phragmites japonica, Miscanthus sacchariflorus, Themeda triandra, and Pennisetum alopecuroides were formed sod completely in soil composition type of vermiculite and peatmoss(1 : 1, v/v). Thus this media seems to be best sad production media for rehabilitation works of Close-to-Nature River and man-made wetlands. Phragmites japonica and Miscanthus sacchariflorus were not significantly different in shoot height and the number of tillers by different planting distance for the first one year of experiment. Pennisetum alopecuroides shows high possibility to be used for Close-to-Nature River rehabilitation works by seeding.

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.124-130
• /
• 1998

It failed occasionally to take a reasonable emergence rate since tobacco (Nicotiana tabacum L.) seeds were planted on late Jan. showing lowest temperature. This experiment was done to measure the effect of GA3 (concentration ; period) , light quality (red ; white ; dark) during or after its treatment, daily irradiation hours( 0 ; 8 ; 12 ;16) and germination termperature (20 or 10 $^{\circ}C$ ocnstant ; 20/1$0^{\circ}C$ alternating) on the germination rate. Red and white light given during grmination showed no differences between the other daily irradiation hours except that 8 hours red light delayed germination although their 12 hours irradiation had the gratest rate. The rate was increased with increased concentration to GA3 0.01 mM or increased imbibition period to 3 days although the rate of cv. NC 82 was less than that of cv. Burley 21 in the case of dark imbibition of GA3 but daily 12 hours irradiation during germination. Light quality forced during GA3 imbibition eliminated such effect of GA3 shown in the darkness so that only light quality pretreatment and termperature during germinition were affected on the rate. The germination rate of thecultivars was decreased in the order of red, white light, darkness meaning that it was highly influenced by the light quality during GA3 treatment. Regardless of GA3 or light quality treatment,on the other hand, the rate was greater in 20 $^{\circ}C$ constat than 1$0^{\circ}C$ constant and 20/1$0^{\circ}C$ alternating germination temperature having similar germinative patterns.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.121-125
• /
• 2017

This study deals the prediction of temperature effect on low-frequency dispersion of alternating current (AC) conductivity spectra of composite materials based on copolymer reinforced with carbon black (CB) particles. A sample of ethylene butylacrylate loaded with 13% of CB particles were prepared and investigated using the impedance spectroscopy representation in the frequency range from 40 Hz to 0.1 MHz and temperature range from $20^{\circ}C$ to $125^{\circ}C$. The dielectric constant, ${\varepsilon}^{\prime}$, and dielectric losses, ${\varepsilon}^{{\prime}{\prime}}$, were found to decrease with increasing frequency. The frequency dependence of the AC conductivity follows the universal power law with a large deviation in the high frequency region, the positive temperature coefficient in resistivity effect has been observed below the melting temperature which makes this composite potentially remarkable for industrial applications.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.11
• /
• pp.1028-1034
• /
• 2008

The exhaust systems are usually subjected to vibration or shock at high temperatures. The high temperature fatigue tests of the exhaust systems are rarely performed in domestic industries due to limited number of test facility and high test costs. In this paper, the high temperature fatigue test of some part of the exhaust system, not the whole system, is carried out. The resonator located at the central range is heated in the cylindrical electric furnace and the alternating load is applied on the end of the pipe welded to the resonator. The high temperature fatigue strength of the welded joint is obtained. The location of the fatigue crack is different to that in room temperature.