Kim, Kyung-Tack;Choi, Hee-Don;Kim, Sung-Soo;Hong, Hee-Do
Applied Biological Chemistry
/
v.41
no.6
/
pp.431-436
/
1998
The optimum ohmic heating condition of apple juice was investigated with model solution. The temperature rise of model solution was found to be $7.8,\;21.0,\;47.4^{\circ}C/min$ when the distances between electrodes were 29, 22, and 17mm, respectively. The heating rate increased proportionally with the numbers of electrode pairs, 1 to 3 and highly dependent on applied voltage. The heating rate was not affected by the frequencies ranged from 60 Hz to 60 KHz and the wave form of applied alternating electric current. The apple juices prepared by ohmic heating sterilization revealed similar physicochemical properties to that by commercial sterilization.
Proceedings of the Materials Research Society of Korea Conference
/
2011.05a
/
pp.38.1-38.1
/
2011
최근 중동정세의 변화와 유류 소비의 증가에 따른 유가의 급등과, 일본 지진사태로 일어난 원자력 발전의 안정성에 대한 문제로 인하여 안전하고 깨끗하게 에너지를 생산할 수 있는, 저탄소 녹색성장을 구현할 수 있는 신재생 에너지에 관련된 연구에 많은 관심이 모아지고 있다. 특히 태양광 에너지를 전기로 변환하여 사용하는 것은 최근 가장 큰 관심사 중 하나이다. 나노결정 Si (nc-Si) 박막은 이러한 광전자 산업 및 태양 에너지 분야에서의 폭넓은 응용 가능성으로 많은 연구가 진행되고 있다. 이러한 nc-Si 박막의 발광 특성은 비정질 박막내 Si 나노결정에 기인한 양자제한효과(quantum confinement effect)에 의한 것으로 알려져 있다. 본 연구에서는 증착시 기판에 AC (alternating current) Bias를 인가하여 PE CVD 기법으로 nc-Si:H 박막을 증착하였다. H2와 SiH4를 각기 45, 20 sccm으로, 100 W의 RF 전압을 주어 플라즈마를 생성하였으며, 60~900 Hz의 주파수 범위에서 60 V의 Bias를 인가하여 박막을 증착하였다. 이들 박막의 결정 크기, 결정화도, 나노 구조 및 광학적, 화학적, 기계적 특성을 XRD, FT-IR, Raman spectroscopey, AFM, PL, Nano indenter 등을 사용하여 조사하였으며, 기판에 인가된 전압과 주파수에 따른 결정크기와 박막의 광학적 특성과 상관관계를 고찰하였다. Bias 전압에 따라 ~1에서 ~4 nm의 크기를 갖는 나노 크리스탈이 생성 되었으며, 최고 10%의 나노결정 분율을 가지는 박막을 증착하였다. 이는 광학적 특성에도 영향을 주어 PL (photoluminescence)의 피크는 470~710 nm의 영역에서 관찰되었다. 또한 AC-Bias의 영향으로 박막 내 응력 해소에도 영향을 주어 박막내 존재하는 응력이 결정에 미치는 영향도 알 수 있었다. 이번 발표에선 증착 조건에 따른 박막의 나노구조 및 광학적 특성의 변화와 이들 간의 상관관계를 발표하고자 한다.
The Journal of Korean Association of Computer Education
/
v.4
no.1
/
pp.127-134
/
2001
Many teachers at vocational high schools have had difficulties overcoming the gap between what students know and what students have to achieve in many topics. Mathematics is toughest of all, since most of textbooks in electronics are assuming student's basic knowledge in math. Considering that many students with very low achievements are entering vocational high schools, reality is far from such assumption. Inevitably, we have to face two difficult questions; do we have enough time to teach these kids all the math that they need in two years? If not, what alternatives we should adopt? We just do not have enough time and therefore find out a way to cope with harsh reality. According to our preliminary study, we suggest that multimedia-based CAI may be the best way to attack this problem. From hardware point of view, fortunately, many of vocational high schools are reasonably equipped for multimedia-based education. However there have been hardly any effort to develop courseware for vocational education in Korea. In this paper, a CAI title for learning basic characteristics of alternating current has been designed and implemented. The developed multimedia-based CAI title has been applied with respect to first grade students at local vocational high schools. A survey after classes shows that CAI could help student feel much comfortable with Basic Electricity course and grasp physical understanding much easily. Accordingly we conclude that classes adopting CAI would be of great help to put education in vocational high schools on the right track.
Kim, Min-Jeong;Park, Sang-Dong;Lee, A-Ram;Kim, Kyung-Ho;Jang, Jun-Hyouk;Kim, Kap-Sung
Journal of Acupuncture Research
/
v.19
no.2
/
pp.238-249
/
2002
Facial palsy is commonly encountered disease in the clinic but bilateral facial palsy is known as rare disease. Type of facial nerve paralysis include unilateral, recurrent ipsilateral, recurrent alternating and bilateral simultaneous palsies. Among the types, the reported incidence of bilateral simultaneous palsy is 0.3~2% of facial paralysis patients. We experienced I case of patient with bilateral simultaneous facial palsy that was concluded as bilateral bell's palsy. Objective : The purpose of this paper is to report the patient with bilateral facial palsy, who improved by oriental medical treatment. Another purpose is to review the current literature and to differential diagnosis of bilateral facial paralysis. Methods and Results : The patient was treated by acupuncture, herb medication and self-massage on facial muscle for 14 weeks. House-brackmann grading score was improved into I/I (Rt/Lt) from IV/IV. Conclusion : Through reviewing some literatures and reports, It is concluded that bilateral facial palsy was related to many other disorders and more ominous than unilateral facial palsy. therefore, its work-up should include a complete neurologic assesment and thorough evaluation. also, we consider that bilateral Bell's palsy can improve by oriental medical treatments.
Journal of the Korean Society of Clothing and Textiles
/
v.19
no.2
/
pp.297-316
/
1995
The system and symbolizing ideologic meanings of the metallic Kwon in period of the Three-Kingdoms were comsidered by comparing to their cultural path and structal styles throughout the tree and the deer worship ideology. The results of this study are as followings; Firstly, the beginning of the Korean, mostly northern style was originated from metal tools of the Bronze age in BC 6c-7c. The maJ;lufature of the metallic adornment brought the pr-evailing use of metallic objects of craftwork after the supply of ironmongery. Secondly, the cultmal characteristics of the metallic Kwan in the kor-ean Peninsula were influenced f-rom the northern chinese tribes, Momg Go, Hung No, and Sien-pi who were transmitted from the scythian of the southern Russia having a prefenence for gold. Thir-dly, the metallic Kwon of the Kogmgo and the Baekje era was ideologically based on the ar-t of Buddism of the pattern of blazing flame, the carved pattern of flower- of herb, and the honey. sukle which were tramsmitted to china thr-ough the silk noad. Fourthly, the metallic K wam of the silla era consisted of the tree and the antler types in closely nelated to the tree and the deer ideology which were based on the background of shamanism. It should be raid that the metallic Kwan of the silla esa are connected to the type of nor-them ancient K wan. Lasthy, the metallic Kwan-Mo of the Kaja esa was mosthy original type of flower of herb even if kome of these ar-e similiar to the tree adornment type of silla. This type of flower of herb in based on the scythian type with a statue im silveer founded at Alexandnopol in the southern russia.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.491-491
/
2011
Transparent and flexible electronic devices that are light-weight, unbreakable, low power consumption, optically transparent, and mechanical flexible possibly have great potential in new applications of digital gadgets. Potential applications include transparent displays, heads-up display, sensor, and artificial skin. Recent reports on transparent and flexible field-effect transistors (tf-FETs) have focused on improving mechanical properties, optical transmittance, and performances. Most of tf-FET devices were fabricated with transparent oxide semiconductors which mechanical flexibility is limited. And, there have been no reports of transparent and flexible all-organic tf-FETs fabricated with organic semiconductor channel, gate dielectric, gate electrode, source/drain electrode, and encapsulation for sensor applications. We present the first demonstration of transparent, flexible all-organic sensor based on multifunctional organic FETs with organic semiconductor channel, gate dielectric, and electrodes having a capability of sensing infrared (IR) radiation and mechanical strain. The key component of our device design is to integrate the poly(vinylidene fluoride-triflouroethylene) (P(VDF-TrFE) co-polymer directly into transparent and flexible OFETs as a multi-functional dielectric layer, which has both piezoelectric and pyroelectric properties. The P(VDF-TrFE) co-polumer gate dielectric has a high sensitivity to the wavelength regime over 800 nm. In particular, wavelength variations of P(VDF-TrFE) molecules coincide with wavelength range of IR radiation from human body (7000 nm ~14000 nm) so that the devices are highly sensitive with IR radiation of human body. Devices were examined by measuring IR light response at different powers. After that, we continued to measure IR response under various bending radius. AC (alternating current) gate biasing method was used to separate the response of direct pyroelectric gate dielectric and other electrical parameters such as mobility, capacitance, and contact resistance. Experiment results demonstrate that the tf-OTFT with high sensitivity to IR radiation can be applied for IR sensors.
Journal of the Korean Society of Industry Convergence
/
v.17
no.3
/
pp.93-102
/
2014
Recently the interest in permanent magnet alternating motor using for electric compressor become great. Especially the research on Interior Permanent Magnet Motor has been doing actively for its advantages in the energy density and the efficiency. In order to control the output of motor to the desired value, the current control or speed control of motor are required. The accurate detection of rotor position and speed information are necessary for the control of motor. In general, the encoder, hall sensor, and resolver are used to obtain the information of motor position and speed and the speed detection algorithm, M/T method, is applied. However, the M/T method causes the error depending on rotor speed. Therefore, this M/T speed detection method is not perfect. In this paper, it is proposed that the PI control with a 1st transfer function and the integration element between velocity and position are composed in series and this feeds back to the reference value of position angle. The proposed algorithm is a function of the integral elements 2nd term, speed element, is used as an output. Thus, it is possible to detect the correct speed by configuring like the mechanical structure similarly. The proposed algorithm is verified by using PSIM DLL and is applied to the BLAC motor drive. And also it is confirmed that this system estimates the accurate speed regardless of rotor speed changes. As a example, the experimental results and simulations shows that the proposed method is very effective.
The plasma ion density in AC-PDP has shown to be increased from $5.6{\times}10^{11}cm^{-3}$ to $9.0{\times}10^{11)cm^{-3}$ as the Xe mixture ratio to neon increase from 1 % to 10 %, respectively, at fixed pressure of 400 Torr, by using the micro-Langmuir probe. It is noted that the plasma ion density is density increases as the gas pressure increases in this experiment. The electron temperature decreases from 2.3 to 1.2 eV as the Xe mole fraction increases from 1 % to 10 % at fixed pressure of 400 Torr, which is measured by the micro Langmuir probe and high-speed ICCD camera in this experiment. It is noted that the electron temperature decreases as the gas pressure increases from 150 to 400 Torr in this experiment. It is also observed that the exited Xe atom density and the plasma ion density are in strong correlation sharp between each other in this experiment. It is noted that $5.2{\times}10^{12}cm^{-3}$ in the $1s_5$ metastable state and $1.2{\times}10^{12}cm^{-3}$ in the $1s_4$ resonance state for the PDP cell with gap of 50 um distances under the fixed gas pressure of 400 Torr and Xe content ratio of 10 %.
Huh, Pil-Ho;Park, Myung-Geun;Jo, Nam-Ju;Lee, Jin-Kook;Lee, Jang-Oo;Wongkang Yang
Macromolecular Research
/
v.12
no.4
/
pp.422-426
/
2004
Solid polymer electrolytes based on poly(ethylene glycol)-polyurethane (PEG-PU) complexed with LiClO$_4$ salt have been prepared by the solvent casting method. A PEG-PU material (PEG:4,4'-diphenylmethane diisocyanate: l,4-butanediol = 1:2:1) was synthesized through a typical two-step condensation reaction. We investigated the effects of the salt concentration on the ionic conductivity ($\sigma$) and the glass transition temperature (T$_{g}$ ) of the complex electrolytes by using alternating current impedance spectroscopy, differential scanning calorimetry, and dynamic mechanical thermal analysis. The measured values of both $\sigma$ and T$_{g}$ exhibited similar tendencies in that they had maxima within the range studied, probably because of two opposite effects, i.e., the increased number of carrier ions and the decreased chain mobility (or increased T$_{g}$ ) caused by the increase in the salt concentration. The highest conductivity, on the order of 2.43 ${\times}$ 10$^{6}$ S$cm^{-1}$ /, was obtained at an [O]/[Li$^{+}$] ratio of ca. 16 (0.92 ㏖ salt per kg of matrix polymer).
Lee, Dongryul;Lee, Yugin;Kim, Hyung-Jong;Lee, Min Hyung
Journal of the Korean institute of surface engineering
/
v.47
no.2
/
pp.68-74
/
2014
The seed step-coverage enhancement process (SSEP) using Pd/Cu/PVP colloids was investigated for the filling of through silicon via (TSV) without void. TEM analysis showed that the Pd/Cu nano-particles were well dispersed in aqueous solution with the average diameter of 6.18 nm. This Pd/Cu nano-particles were uniformly deposited on the substrate of Si/$SiO_2$/Ti wafer using electrophoresis with the high frequency Alternating Current (AC). After electroless Cu deposition on the substrate treated with Pd/Cu/PVP colloids, the adhesive property between deposited Cu layer and substrate was evaluated. The Cu deposit obtained by SSEP with Pd/Cu/PVP colloids showed superior adhesion property to that on Pd ion catalyst-treated substrate. Finally, by implementing the SSEP using Pd/Cu/PVP colloids, we achieved 700% improvement of step coverage of Cu seed layer compared to PVD process, resulting in void-free filling in high aspect ratio TSV.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.