• Journal of Life Science
• /
• v.18 no.7
• /
• pp.980-985
• /
• 2008

This study was carried out to develope an alcoholic drink by fermentation of onion extract using Saccharomyces cerevisiae. The optimal conditions for ethanol production were obtained by standing culture at $25^{\circ}C$ for 5 days with 5% inoculum volume. At the results by flask culture, the growth curve of used S. cerevisiae reached to the stantionary phase at 48 hr and the death phase at 90 hr, whereas ethanol production reached maximum at 114 hr. Under the above conditions, a large scale production was carried out. A standing culture in 5 l fermenter showed the similar results to its flask culture, but progressed 24 hr rapidly more than that of the flask culture. A fed-batch culture was performed by addition of the onionic medium supplemented with 10% (v/v) sucrose after 72 hr from the fermenting start. The fed-batch culture could prevent S. cerevisiae from entering into the death phase and maintain constant level of alcohol production. A continuous culture was able to carry out by adding per every 24 hr the onionic medium supplemented with 10% (v/v) sucrose after 72 hr from the fermenting start. Although S. cerevisiae used showed a little decreased growth, alcohol production maintained roughly the constant level at the maximum yield. To enhance the quality of this alcoholic drink, $2-O-{\alpha}-D-glucopyranosyl$ L-ascorbic acid (AA-2G) was supplemented into the onion extract of the substrate for fermentation. As resulted at this study, this alcoholic drink containing AA-2G should be used as a functional fermented alcohol drink strengthened with vitamin C.

• Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.293-298
• /
• 2009

Several studies have reported that nonylphenol (NP) and 2,2', 4,6,6'-pentachlorobiphenyl (PCB104) exhibit estrogenic activity. To investigate the estrogenic potency of NP and PCB104 during oocyte maturation, fully vitellogenic oocytes (0.76 mm diameter in average) of yellow fin goby, Acanthogobius flavimanus, were exposed in vitro to these chemicals at different concentrations (0.1, 1, 10, 100, and 1,000 ng/mL) with the exogenous precursor $17\alpha$-hydroxyprogesterone ($17{\alpha}OHP$) 50 ng/mL in the presence or absence of human chorionic gonadotropin (HCG). The production of testosterone (T), estradiol-$17\beta$ (E2), and $17\alpha,20\beta$-dihydroxy-4-pregnen-3-one ($17\alpha20{\beta}OHP$) in response to NP or PCB104 were measured by radioimmunoassay. Steroid levels were also expressed as E2/T and E2/$17\alpha20{\beta}OHP$ ratios. In the absence of HCG, no significant differences in either NP or PCB104 treatment groups were observed. In the presence of HCG, NP treatment did not show significant differences in the production of T, E2, and $17\alpha20{\beta}OHP$ at any concentrations tested, but E2/T ratios were decreased at concentrations of 0.1, 1, 10, and 1,000 ng/mL compared with the control group. PCB104 decreased E2 production at concentrations of 0.1, 10, and 1000 ng/mL, but did not show significant differences in the production of T and $17\alpha20{\beta}OHP$ at any concentration tested. While E2/T ratios were decreased at PCB104 concentrations of 0.1, 1, 10, and 1,000 ng/mL, E2/$17\alpha20{\beta}OHP$ ratios were also decreased at 0.1, 10, and 1,000 ng/mL compared with the control. Results indicate that both NP and PCB104 appeared to have antiestrogenic effects during this phase.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.327-336
• /
• 1994

The synergistic effects in mechanical mixture catalysts of Mo-V-O and metal oxide were investigated for the selective oxidation of acrolein. The metal oxides used are $SnO_2$, ${\alpha}-Sb_2O_4$, $WO_3$, ${\alpha}-Al_2O_3$, CuO, $MnO_2$, $Cu_2O$, MgO, CoO, and ZnO. Mechanical mixtures of Mo-V-O plus $SnO_2$ or ${\alpha}-Sb_2O_4$ had resulted in higher conversion of acrolein and higher yield of acrylic acid than Mo-V-O. The origin of the synergy is attributed to the cooperation of Mo-V-O and $SnO_2$ or ${\alpha}-Sb_2O_4$, in which $SnO_2$ or ${\alpha}-Sb_2O_4$ forms dissociated oxygens at their oxygen vacancies and transports them to Mo-V-O. $Cu_2O$, MgO, CuO, and $MnO_2$, increased conversion of acrolein but decreased yield of acrylic acid. CoO and ZnO inhibited the catalytic performance of Mo-V-O. The different role of these metal oxides is explained in terms of their oxidation-reduction properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1289-1292
• /
• 2005

The objective of this study was to characterize and determine contents of vitamin E isomers (alpha-, beta-, gamma-, delta-tocopherols and tocotrienols) in different steamed rice dishes, with or without other grains. Five different rice dishes were evaluated for the vitamin E nutritional value as major Korean staple foods. They were plain steamed rice (SR) and steamed rice mixed with barley (SRBa), red bean (SRRB), black bean (SRBB), or multi-grains (SRMG) containing a mixture of black rice, barley, red beans, and black beans. Vitamin E isomers were extracted from five grams of freeze-dried samples with hexane after saponification. An analytical method, using a normal-phase HPLC with a UV detector, was developed and used to determine the amount of each vitamin E component. The results showed that SR contained three vitamin E isomers (alpha-tocopherol, alpha-tocotrienol, and gamma-tocotrienol). Alpha-tocopherol and gamma-tocotrienol were de-tected from all samples while only SRBB contained beta-tocopherol and beta-tocotrienol. SRMG showed the highest (3.9$\mu$g/g dry wt) and SRRB showed the lowest alpha-tocopherol (1.3$\mu$g/g dry wt) contents. SRBB contained about 5 to 16 times more gamma-tocopherol (19.7$\mu$g/g dry wt) than othe.5. These results suggested that adding black bean or multi-grains can dramatically improve the vitamin E nutritional values compared to the plain steamed rice (SR). Information obtained from this study can be directly related to the amount of vitamin E intake and can be used to balance the diet for Koreans.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.3
• /
• pp.360-369
• /
• 2019

Cadherins are essential transmembrane proteins that promote cell-cell adhesion and maintain the corpus luteum structure in the ovary. This study examined the influence of prostaglandin F2 alpha ($PGF2{\alpha}$) on E-cadherin, N-cadherin, and adhesion in luteal theca cells (LTCs). The luteal cells were isolated from the mid-phase corpus luteum, and the LTCs were cultured separately from the luteal heterogeneous cells according to the morphology of the mesenchymal cells and to determine if steroidogenic and endothelial cells of LTCs, 3beta-hydroxysteroid dehydrogenase ($3{\beta}$-HSD), and vascular endothelial growth factor receptor 2 (VEGFR2) mRNA were used. The LTCs were then incubated in the culture medium supplemented with 0.01, 0.1, and 1.0 mM $PGF2{\alpha}$ for 24 h, and the E-cadherin and N-cadherin proteins in the LTCs were detected by confocal laser scanning microscopy. The results revealed $3{\beta}$-HSD mRNA expression in the LTC but no VEGF2R mRNA expression. The E-cadherin and N-cadherin proteins of the LTCs were damaged in the 0.01, 0.1, and 1.0 mM $PGF2{\alpha}$ treatment groups, and the expression of the N-cadherin protein was reduced significantly in 0.01 mM $PGF2{\alpha}$ compared to the 0 mM $PGF2{\alpha}$ treatment groups (P<0.05). In addition, the number of attached LTCs were significantly lower in the 0.01 mM $PGF2{\alpha}$ treatment group than in the 0 mM $PGF2{\alpha}$ treatment group (P<0.05). In conclusion, $PGF2{\alpha}$ affected the disruption of cadherin proteins and cell adhesion in LTCs. These results may help better understand the cadherin and adhesion mechanism during corpus luteum regression in the ovary.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.4
• /
• pp.243-247
• /
• 2007

Retinoids have many important and diverse functions and particularly, have been widely used as anti-aging agent and for the treatment of acne and psoriasis in cosmetics. However, retinoids have low stability against the air, light, water, oxygen and heat, thus, to stabilize the retinoids in formulations is very critical procedure. In this study, cubic liquid crystalline phase of monoolein was applied to stabilize the retinylpalmitate (RP) and to enhance the transdermal permeation. Cubic liquid crystalline phase significantly enhanced the stability of RP. After 15 days, the content of RP in the cubic formulation was 94.7% while the content of RP in ethanol solution was below 0.5% at room temperature. Although BHT containing crystalline phase showed the slightly increased stability of RP, there were no significant differences in RP stability between with or without antioxidants (ascorbic acid, ${\alpha}$-tocopherol, BHT, BHA) at $40^{\circ}C$. The skin retention of RP in crystalline formulations was approximately $5.3{\sim}6.4$ times greater than that of o/w cream formulation. Incorporation of RP into cubic liquid crystalline phase of monoolein effectively stabilized the RP and worked as excellent topical vehicle for RP. Liquid crystalline phase is considered to be suitable formulation for RP for topical delivery system as a stabilizer and permeation enhancing agent.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.11
• /
• pp.1751-1757
• /
• 2007

Elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition upon a change in temperature. This thermally triggered phase transition allows for a simple and rapid means of purifying a fusion protein. Recovery of ELPs-tagged fusion protein was easily achieved by aggregation, triggered either by raising temperature or by adding salt. In this study, levansucrase has been used as a model enzyme in the development of a simple one-step purification method using ELPs. The levansucrase gene cloned from Pseudomonas aurantiaca S-4380 was tagged with various sizes of ELPs to functionally express and optimize the purification of levansucrase. One of two ELPs, ELP[V-20] or ELP[V-40], was fused at the C-terminus of the levansucrase gene. A levansucrase-ELP fusion protein was expressed in Escherichia coli $DH5{\alpha}$ at $37^{\circ}C$ for 18 h. The molecular masses of levansucrase-ELP[V-20] and levansucrase-ELP[V-40] were determined as 56 kDa and 65 kDa, respectively. The phase transition of levansucrase-ELP[V-20] occurred at $20^{\circ}C$ in 50 mM Tris-Cl (pH 8) buffer with 3 M NaCl added, whereas the phase transition temperature ($T_t$) of levansucrase-ELP[V-40] was $17^{\circ}C$ with 2 M NaCl. Levansucrase was successfully purified using the phase transition characteristics of ELPs, with a recovery yield of higher than 80%, as verified by SDS-PAGE. The specific activity was measured spectrophotometrically to be 173 U/mg and 171 U/mg for levansucrase-ELP[V-20] and levansucrase-ELP[V-40], respectively, implying that the ELP-tagging system provides an efficient one-step separation method for protein purification.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.551-554
• /
• 2002

As a general rule, the brazing process between cemented carbides and steel used by Silver (Ag) type brazing filler. The composition of Ag type filler were used Ag-Cu-Zn-Cd type filler mainly. But, the demand of Cadmium (Cd)-free in Ag type filler was raised recently. The reason why Cd-free in Ag brazing filler were occupied to vaporize as a CdO$_2$ when brazing process, because of Cd element was almost low boiling point of all Ag type filler elements. And, CdO$_2$ was a very harmful element for the human body. This experiment was developed Cd-freeing on Ag type filler that was used Indium (In) instead of Cd element. In this experiment, there were changed from 0 to 5% In addition in Ag brazing filler and investigated to most effective percentage of Indium. As a result, the change of In addition instead of Cd, there was a very useful element and obtained same property only 3% In added specimens compared to Cd 19% added specimens. These specimens were obtained same or more deflective strength. In this case, there were obtained 70 MPa over strength and wide brazing temperature range 650-800 C. A factor of deflective strength were influenced by composition and the shape of $\beta$ phase and between $\beta$ phase and cemented carbides interface. Indium element presented as $\alpha$ phase and non-effective factor directly, but it's occupied to solid solution hardening as a phase. $\beta$ phase were composed 84-94% Cu-Ni-Zn elements mainly. Especially, the presence of Ni element in interface was a very important factor. Influence of condensed Ni element in interface layer was increased the ductility and strength of brazing layer. Therefore, these 3% In added Ag type filler were caused to obtain a high brazing strength.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.2
• /
• pp.57-64
• /
• 2002

The 22%Cr-5%Ni-3%Mo duplex and 18%Cr-8%Ni austenitic stainless steels have been nitrogen permeated under the $1Kg/cm^2$ nitrogen gas atmosphere at the temperature range of $1050^{\circ}C{\sim}1150^{\circ}C$. The nitrogen-permeated duplex and austenitic stainless steels showed the gradual decrease in hardness with increasing depth below surface. The duplex stainless steel showed nitrogen pearlite at the outmost surface and austenite single phase in the center after nitrogen permeation treatment, while the obvious microstructural change was not observed for the nitrogen-permeated austenitic stainless steel. After solution annealing the nitrogen-permeated stainless steels(NPSA treatment) at $1200^{\circ}C$ for 10 hours, the hardness of the duplex and austenitic stainless steels was constant through the 2 mm thickness of the specimen, and the ${\alpha}+{\gamma}$ phase of duplex stainless steel changed to austenite single phase. Tensile strengths and elongations of the NPSA-treated duplex stainless steel remarkably increased compared to those of solution annealed (SA) duplex stainless steel due to the solution strengthening effect of nitrogen and the phase change from a mixture of ferrite and austenite to austenite single phase, while the NP-treated austenitic stainless steel displayed the lowest value in elongation due to inhomogeneous deformation by the hardness difference between surface and interior.

• Journal of Powder Materials
• /
• v.17 no.6
• /
• pp.443-448
• /
• 2010

The $\beta$ phase Ti-Nb-Sn-HA bio materials were successfully fabricated by high energy mechanical milling and pulse current activated sintering (PCAS). Ti-6Al-4V ELI alloy has been widely used as biomaterial. But the Al has been inducing Alzheimer disease and V is classified as toxic element. In this study, ultra fine sized Ti-Nb-Sn-HA powder was produced by high energy mechanical milling machine. The $\beta$ phase Ti-Nb-Sn-HA powders were obtained after 12hr milling from $\alpha$ phase. And ultra fine grain sized Ti-Nb-Sn-HA composites could be fabricated using PCAS without grain growth. After sintering, the microstructures and phase-transformation of Ti-Nb-Sn-HA biomaterials were analyzed by scanning electron microscope (SEM) and X-ray diffraction (XRD). The relative density was obtained by Archimedes principle and the hardness was measured by Vickers hardness tester. The $\beta$-Ti phase was obtained after 12h milling. As result of hardness and relative density, 12h milled Ti-Nb-Sn-HA composite has the highest values.