• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.194-194
• /
• 2013

In order to investigate nanotube morphology change of Ti-6Al-4V alloys by heat treatments, the Ti-6Al-4V alloys were used in this study. In non-treated Ti-6Al-4V alloy case, nanotubes only exhibited at ${\alpha}$ phase region with dissolved V-oxide area of ${\beta}$ phase. However, in Ti-6Al-4V alloy at $800^{\circ}C$ WQ case, nanotubes exhibited at both ${\alpha}$ and ${\beta}$ phase region. Electrochemical corrosion studies showed that the nanotubular alloy at $800^{\circ}C$WQ possesses slightly higher corrosion resistance than non-treated nanotubular alloy.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.144-145
• /
• 2006

A developed molybdenum hybrid-alloyed steel powder is based on a molybdenum prealloyed steel powder to which molybdenum powder particles are diffusion bonded. The sintered compact made of this powder has a finer pore structure than that of the conventional molybdenum prealloyed steel powder, because the ferritic iron phase $({\alpha}-phase)$ with a high diffusion coefficient is formed in the sintering necks where molybdenum is concentrated resulting in enhanced sintering. The rolling contact fatigue strength of the sintered and carburized compacts made of this powder improved by a factor of 3.6 compared with that of the conventional powder due to the fine pore structures.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.180-180
• /
• 2003

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.974-977
• /
• 1993

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.23-23
• /
• 1996

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.561-569
• /
• 1988

Mixtures of very small amounts of additive, carbon and silica(about 0.46${\mu}{\textrm}{m}$) which synthesized by the hydrolysis of ethyl silicate, the molar ratio of SiO2/C was fixed to 1/10, was nitrided at 145$0^{\circ}C$. It was considered that the optimum amount of additive to promote the nitridation reaction was below 2.0wt%. By the addition of additive, the nitridation reaction was promoted and formation of $\beta$-Si3N4 was promoted at 145$0^{\circ}C$ for 1hour, but, the nitridation reaction was decreased and the ratio of $\alpha$/$\beta$ of Si3N4, was increased at 145$0^{\circ}C$ for 5 hours. The crystal phase was $\alpha$ phase and the nitridation reaction was promoted and the particle size of silicon nitride was become smaller by the addition of $\alpha$-Si3N4, but silicon nitride of whisker-like form was produced by the addition of transition elements. There was a difference in the lattice constants of $\alpha$-Si3N4, but no difference in its of $\beta$-Si3N4 according to kinds of added substance and reaction time.

• Journal of Korea Foundry Society
• /
• v.8 no.4
• /
• pp.453-458
• /
• 1988

Al-Si alloy powder produced by the gas atomizer showed fine eutectic structure between ${\alpha}-dendrites$, that was grown by coupled growth, and there remained small amount of ${\alpha}$ in Al - 20 wt% Si alloy. The morphology of Si in the eutectic structure was largely influenced by the recalescence caused by solidification latent heat, and that was thought to be due to decrement of the surface energy of Si. In modified eutectic Si by rapid solidification, fine twin about $0.01\;{\mu}m$ was observed and growth direction of eutectic Si was <112>. This fact implied that the growth mechanism of eutectic Si in rapid solidification was related to TPRE mechanism. Due to rapid solidification Si was soluble in ${\alpha}-phase$ in Al - 12.6wt%Si alloy up to about 3.4wt%, and the solubility of Si in ${\alpha}-phase$ reaches the equilibrium solubility stare after 60min, holding when it was held isothermally at $253-296^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.9
• /
• pp.1291-1294
• /
• 2002

Various racemic N-protected ${\alpha}-amino$ acids such as N-t-BOC-(tert-butoxycarbonyl), N-CBZ-(benzyloxycarbonyl) and N-FMOC-(9-fluorenylmethyloxycarbonyl) ${\alpha}-amino$ acids were resolved as their anilide and 3,5-dimethylanilde derivatives on an HPLC chira l stationary phase (CSP) developed by modifying a commercial (S)-leucine CSP. The chromatographic resolution results were compared to those on the commercial (S)-leucine CSP. The resolutions were greater on the modified CSP than those on the commercial CSP with only one exception, the resolution of N-t-BOC-phenylglycine anilide. In addition, the chromatographic resolution behaviors were quite consistent except for the resolution of N-protected phenylglycine derivatives, the (S)-enantiomers being retained longer. Based on the chromatographic resolution behaviors and with the aid of CPK molecular model studies, we proposed a chiral recognition mechanism for the resolution of N-protected ${\alpha}-amino$ acid derivatives. However, for the resolution of N-protected phenylglycine derivatives, a second chiral recognition mechanism, which competes in the opposite sense with the first chiral recognition mechanism, was proposed. The two competing chiral recognition mechanisms were successfully used in the rationalization of the chromatographic behaviors for the resolution of N-protected phenylglycine derivatives.

• Journal of Power System Engineering
• /
• v.8 no.4
• /
• pp.31-37
• /
• 2004

The damping capacity and strength of Fe-2Al-26Mn alloys have been studied for the development of new materials with high strength and damping capacity. Particularly, the effect of ${\alpha}'\;and\;{\varepsilon}$ martensite phase, which constitutes the microstructure of cold rolled Fe-Al-Mn alloys, has been investigated in terms of the strength and damping capacity of the alloys. The damping capacity rises with increasing the degree of cold rolling and reveals the maximum value at 25% reduction. The damping capacity is strongly affected by the volume fraction of ${\varepsilon}$ martensite, while the other phases, such as ${\alpha}'$ martensite and austenite phase, actually exhibit little effect on damping capacity. Considering that tensile strength increases and elongation decreases with increasing the volume fraction of ${\alpha}'$ martensite, it is proved that tensile strength is mainly affected by the amount of ${\alpha}'$ martensite.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.334-338
• /
• 1991

Synthesis of $(D-Phe^7\;-Leu^8)$ bradykinin and bradykinin by solid phase method using a new reaction vessel was carried out. Coupling was performed by dicyclohexylcarbodiimide. After cleavage with dried HBr the peptides were purified by high pressure liquied chromatography. Their purify was assayed by paper and thin layer chromatography, melting point and amino acid analysis. $(D-Phe^7\;-Leu^8)$ bradykinin and bradykinin were incubater in vitro endopeptidase $({\alpha}-chymotrysis)$ and exopeptidase(carboxypeptidase A, leucine aminopeptidase) in order to study the degradation pattern of peptides. $(D-Phe^7\;-Leu^8)$ bradykinin and bradykinin were rapidly degradated by ${\alpha}-chymotrypsin$ and carboxypeptidase A $(D-Phe^7\;-Leu^8)$ bradykinin and bradykinin coution$(D-Phe^7\;-Leu^8)$ bradykinin and bradykinin contain imino peptide bound from proline at N-terminal and therefore they were not attacted by leucine aminopeptidase.