• Land and Housing Review
• /
• v.9 no.3
• /
• pp.1-8
• /
• 2018

In Europe and the United States, the use of limit states design has almost been established for pile foundation design. According to the global trend, the Ministry of Land, Transport and Maritime Affairs has established the basic design criteria of the bridge under the limit state design method. However, it is difficult to reflect on the design right now because of lack of research on resistance coefficient of the pile method and ground condition. In this study, to obtain the resistance coefficient of PHC bored pile which is widely used in Korea, the bearing capacity calculated by the LH design standard and the bridge design standard method, the static load test(21 times) and the dynamic load test(EOID 21 times, Restrike 21) The reliability analysis was performed on the results. The analysis of the resistance coefficient of PHC bored pile by loading test was analyzed by adding more than two times data. As a result, the resistance coefficient obtained from the static load test(ultimate bearing capacity) was 0.64 ~ 0.83 according to the design formula and the target reliability index, and the resistance coefficient obtained from the dynamic load test(ultimate bearing capacity) was 0.42~0.55. Respectively. The resistance coefficient obtained from the modified bearing capacity of dynamic load test(EOID's ultimate end bearing capacity + restrike's ultimate skin bearing capacity) was 0.55~0.71, which was reduced to about 14% when compared with the resistance coefficient obtained by the static load test(ultimate bearing capacity). As a result of the addition of the data, the resistivity coefficient was not changed significantly, even if the data were increased more than 2 times by the same value or 0.04 as the previous resistance coefficient. In conclusion, the overall resistance coefficient calculated by the static load test and dynamic load tests in this study is larger than the resistance coefficient of 0.3 suggested by the bridge design standard(2015).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1449-1455
• /
• 2006

Raw oysters were treated at $10^{\circ}C$ and $22^{\circ}C/350$ Mpa/15 min, and microbial counts and quality were measured during storage of 14 days at $10^{\circ}C$. Total viable cell count (TVCC) in untreated oyster increased greatly during storage from starting inoculum of $1.6\times10^2\;CFU/mL$, and reached to $5.6\times10^2\;CFU/mL$ after 4 days of storage. TVCC of the pressure-treated was about $10^1\;CFU/mL$ right after high hydrostatic pressure treatment and increased slowly during storage, and about $10^3\;CFU/mL$ even after 7 days of storage. Lactic acid bacteria count (LABC) in the untreated was increased greatly during storage from starting inoculum of $3.3\times10^3\;CFU/mL$ at 3 days of storage and $7.2\times10^4\;CFU/mL$ after 4 days of storage. LABC in the pressure-treated was detected only after 5 days of storage, and about $10^2\;CFU/mL$ after 8 days of storage. The pH of the untreated was 6.19 and decreased gradually during storage, and 5.83 after 4 days of storage. The pH of the pressure-treated showed little change during storage, and 6.07, 6.03 and 5.82 after storage of 4, 8 and 14 days, respectively. Volatile basic nitrogen (VBN) in the untreated was 16.8 mg%, and maintained almost constant until 1 day of storage, and then increased suddenly, and 30.1 mg% after 4 days of storage. VBN of the pressure-treated stayed unchanged during storage, and about 20 and 23 mg% even after 4 and 8 days of storage, respectively. Hunter $L^*,\;a^*\;and\;b^*$ values were increased until 2 days of storage and then showed no change during storage. Demerit score was the lowest in the thawed raw oyster, and then in the increasing order of the pressure-treated (4 day and 8 day storage) and the untreated (4 day storage).

• Journal of KIISE:Databases
• /
• v.33 no.1
• /
• pp.102-116
• /
• 2006

Electronic catalogs (or e-catalogs) hold information about the goods and services offered or requested by the participants, and consequently, form the basis of an e-commerce transaction. Catalog management is complicated by a number of factors and product classification is at the core of these issues. Classification hierarchy is used for spend analysis, custom3 regulation, and product identification. Classification is the foundation on which product databases are designed, and plays a central role in almost all aspects of management and use of product information. However, product classification has received little formal treatment in terms of underlying model, operations, and semantics. We believe that the lack of a logical model for classification Introduces a number of problems not only for the classification itself but also for the product database in general. It needs to meet diverse user views to support efficient and convenient use of product information. It needs to be changed and evolved very often without breaking consistency in the cases of introduction of new products, extinction of existing products, class reorganization, and class specialization. It also needs to be merged and mapped with other classification schemes without information loss when B2B transactions occur. For these requirements, a classification scheme should be so dynamic that it takes in them within right time and cost. The existing classification schemes widely used today such as UNSPSC and eClass, however, have a lot of limitations to meet these requirements for dynamic features of classification. In this paper, we try to understand what it means to classify products and present how best to represent classification schemes so as to capture the semantics behind the classifications and facilitate mappings between them. Product information implies a plenty of semantics such as class attributes like material, time, place, etc., and integrity constraints. In this paper, we analyze the dynamic features of product databases and the limitation of existing code based classification schemes. And describe the semantic classification model, which satisfies the requirements for dynamic features oi product databases. It provides a means to explicitly and formally express more semantics for product classes and organizes class relationships into a graph. We believe the model proposed in this paper satisfies the requirements and challenges that have been raised by previous works.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1976.06a
• /
• pp.88.1-88
• /
• 1976

The authors have been performed a statistical survey for 228 cases with foreign bodies in the food and air passages who had visited the department of Otolaryngology, National Medical Center and removed endoscopically during the period of last 10 years from 1966 to 1975. The following results were obtained: 1. The total numbers of foreign bodies in the food and the air passages were 228 cases, and among of them 181 cases were foreign bodies in the food passage and 47 cases were foreign bodies in the air passage. The ratio between the food and the air passages was about 3.7 : 1. 2. The prevalent foreign bodies in the esophagus were coin, meat and food particles and bone in order of frequency. In air passage, bean and peanut were most prevalent foreign bodies and the next were metalic substances, fish bone in order of frequency. 3. In the age incidence, 65.4% of the esophageal foreign bodies and 67.6% of foreign bodies in the air passage were under 5 years of age especially coin, 92.9%. 4. In sex distribution, 99 cases were female, and the ratio between male and female was 1.3:1. There was no significant difference between male and female in the foreign bodies of the esophagus but the foreign bodies in the air passage were more prevalent in male as the ratio of 2.1:1. 5. The most prevalent site of lodgement in esophagus was first physiologic narrowing of the esophagus as the count of 83.8%. In foreign bodies of the air passage, bronchial foreign bodies were most frequent. And bronchial foreign bodies were more frequent in the right side as the ratio of 3.7:1. 6. In duration of lodgement, 56.0% of foreign bodies of the food passage were removed within 24 hours and almost of them were removed within 5 days. In foreign bodies in the air passage, only 32.4% were removed within 24 hours but 29.7% were removed within more than 1 week in the air passage. 7. Under the esophagoscope, granulation tissue were noted in the 5 cases of the foreign bodies in the esophagus due to foreign bodies. In foreign bodies of the air passage, complication were encountered in the 4 cases and also removed surgically and among of them, 2 patients were expired due to complications during post operative course.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.82-103
• /
• 2017

Systems operating construction expenses for preservation and repair of the architectural heritage may be divided into two in the Japanese colonial era. They are preservation cost nd preservation cost-aided constructions, according to the ownership of a building. Preservation cost construction refers to preservation and repair of government-owned buildings that Japanese Government General of Korea had the ownership and the right of management, and preservation cost-aided construction means preservation and repair of private buildings such as Buddhist temples. In the case of preservation and repair of buildings owned by the government, it was done by the Japanese Government General of Korea, so the same agent executed the budget and managed the properties. They included royal tombs and relics, old government offices, Hyanggyo and some Seowon. On the other hand, in the case of preservation and repair of private buildings, they were private properties, so Japanese Government General of Korea had rights only for permission of preservation and repair. If there was a request for .preservation and repair by an owner, the Japanese Government General of Korea decided on whether it would support its expenses or not and played a role of management and supervision. It applied to Buddhist shrines and pagodas owned by Buddhist temples and shrines and temples owned by individuals and families. Hence, in the case of government-owned buildings, because the preservation cost was spent from the Japanese Government General of Korea's budget for investigation expenses of historical remains or repair expenses of Jeolleung and ruins, they were classified into preservation cost constructions. As for private buildings, the cost was spent from their budget for aiding preservation expenses, so they were classified into preservation cost-aided constructions. Because preservation cost construction and preservation cost-aided construction were conducted by two different agents, there were a little difference in procedures for executing a construction. There was no big difference in the general progress of constructions but was an administrative difference in the kinds of documents submitted and the roles of field supervisors. Such dual systems remained unimproved throughout the Japanese colonial era. The Japanese Government General of Korea was the colonial government so much influenced by the Japanese Government. Most Japanese architectural heritage was owned by Buddhist temples and Shinto shrines and there was almost no building owned by the government, resulting in a unitary system unlike Korea. Heritage system by the Japanese Government General of Korea was established under the influence of Japan regardless of the situation in Korea. Accordingly, Japanese Government General of Korea could not present a definite solution in the bisected system of preservation and repair expenses for the heritage. It shows the limits of the Japanese Government General of Korea in the colonial era.

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.169-188
• /
• 2019

This study was carried out unmanned aerial photography and terrestrial laser scanning to establish digital database on original wall of Gyejoksanseong fortress, and measured ground control points for continuity of the monitoring. It also performed precise examination with the naked eye, unmanned aerial photogrammetry, endoscopy, total station and handy measurement to examine the structural stability of the original walls. The ground control points were considered as a point where visual field can be secured, 3 points were selected around each of the south and north walls. For the right side of the south original wall, aerial photogrammetry was conducted using drones and a deviation analysis of 3-dimensional digital models was performed for short-term monitoring. As a result, the two original walls were almost matched in range within 5mm, and no difference indicating displacement of stones was found, except for partial deviation. Regular monitoring of the areas with structural deformation such as bulging, weak and fracture zone by precisely examining with the naked eye and using high-resolution photo data revealed no distinct change. The inner foundation observed through endoscopy found out that filling stones of the original walls were still remained, while most filling soil was lost. As a result of measuring the total station focusing around the points with structural deformation on the original walls, the maximum displacements of the north and south walls were somewhat high with 6.6mm and 3.8mm, respectively, while the final displacements were relatively stable at below 2.9mm and 1.4mm, respectively. Handy measurement also did not reveal clear structural deformation with displacements below 0.82mm at all points. Even though the results of displacement monitoring on the original walls are stable, it is hard to secure structural stability due to the characteristics of ramparts where sudden brittle fracture occurs. Therefore, it is necessary to conduct conservational scientific diagnosis, precise monitoring, and structural analysis based on the 3-dimensional figuration information obtained in this research.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.66-87
• /
• 2009

The definition of the structure of wooden chamber tomb(piled stone-type) is as follows. It is a tomb with wooden chamber, and stones were piled on top of the wooden chamber, and then a wooden structure was placed on top of the piled stones, and more stones were piled on top of the wooden structure, and sealed with clay. Of course this definition can vary according to periods, the buried, etc. Gyeongju-style piled stone type wooden chamber tombs have some distinguished characteristics compared to general definition of piled stone type wooden chamber tombs. Outside the wooden chamber, either stone embankments or filled-in stones were layed out, and pilet-in stones are positioned right above the wooden chamber, and almost every class used this type, and finally, it is exclusively found in Gyeongju area. First generations of this Gyeongju-style piled stone type wooden chamber tombs appeared in first half of 5th century. These tombs inherited characteristics like ground plan, wooden chamber, double chamber(inner chamber and outer chamber), piled stones, burial of the living with the dead, piled stones, from precedent wooden chamber tombs. However these tombs have explicit new characteristics which are not found in the precedent wooden chamber tombs such as stone embankments, wooden pillars, piled stones(above ground level), soil tumuluses. stone embankments and wooden pillars are exclusively found on great piled stone type above-ground level wooden chamber tombs such as the Hwangnamdaechong(皇南大塚). Stone embankments, wooden pillars, piled stones(above ground level) are all elements of building process of soil tumuluses. stone embankments support outer wall of above-ground level wooden chambers and disperse the weight of tumuluses. Wooden pillars functioned as auxiliary supports with wooden structures to prevent the collapse of stone embankments. Piled stones are consists of stones of regular size, placed on the wooden structure. And after the piled stones were sealed with clay, tumulus was built with soil. Piled stones are unique characteristics which reflects the environment of Gyeongju area. Piled stone type wooden chamber tombs are located on the vast and plain river basin of Hyeongsan river(兄山江). Which makes vast source of sands and pebbles. Therefore, tumulus of these tombs contains large amount of sands and are prone to collapse if soil tumulus was built directly on the wooden structure. Consequently, to maintain external shape of the tumulus and to prevent collapse of inner structure, piled stones and clay-sealing was made. In this way, they can prevent total collapse of the tombs even if the tumulus was washed away. The soil tumulus is a characteristic which emerges when a nation or political entity reaches certain growing stage. It can be said that after birth of a nation, growing stage follows and social structure will change, and a newly emerged ruling class starts building new tombs, instead of precedent wooden chamber tombs. In this process, soil tumulus was built and the size and structure of the tombs differ according to the ruling class. Ground plan, stone embankments, number of the persons buried alive with the dead, quantity and quality of artifacts reflect social status of the ruling class. In conclusion, Gyeongju-style piled stone type wooden chamber tombs emerged with different characteristics from the precedent wooden chamber tombs when Shilla reached growing stage.

• (The)Study of the Eastern Classic
• /
• no.69
• /
• pp.563-592
• /
• 2017

This paper is to examine philosophy of Jurye(周禮, national rituals) described on GyeongJeMunGam and GyeongJeMunGamByeolJip. As it is widely known, Sambong Jeong Do-Jeon (三峯 鄭道傳), regardless of evaluation by posterity, is definitely a figure who established 500 years of Joseon with almost everything handled by his own hands from presenting founding principle of Joseon to organizing the bureaucratic system. In the third year of King Taejo (1394) with Jurye as an ideological model for social innovation, Jeong Do-Jeon wrote Joseongyeonggukjeon and offered it to the king. Joseongyeonggukjeon is a sort of guide for new codes written by Jeong Do-Jeon as a part of defining culture and institutions of the new dynasty, which is based on Confucianism, the ruling idea of the new dynasty. GyeongJeMunGam supplements the section ChiJeon(治典: Articles for Governing) of JoSeonGyeongGukJeon(the first constitution of Joseon Dynasty) mainly to specify the duties and jobs of the prime minister; and also the duties and jobs of the highest secretaries of the kings, and provincial and county governors, whereas GyeongJeMunGamByeolJip consists of the section GunDo specifying the duties and jobs of the kings and the section Euiron additionally explaining about the kings' duties and jobs in the viewpoint of the philosophy of the Book of Change. That is, GyeongJeMunGam finely describes not only the changes, advantages and disadvantages of prime minister system of every dynasty of China and Korea but also the prime minister's duties/jobs and attitude for kings; and it also specifies the duties and jobs of the kings' highest secretaries, guards, provincial and county governors; on the other hand, GyeongJeMunGamByeolJip says that the king should play the symbolic figure setting their mind in right ways and train themselves with virtue through the idea of GunJuSuShin (君主修身: ) to point out a good and capable prime minister and make him govern the country without using their power fully.

• Journal of Distribution Research
• /
• v.17 no.1
• /
• pp.37-63
• /
• 2012

In franchise business, exclusive sales territory (sometimes EST in table) protection is a very important issue from an economic, social and political point of view. It affects the growth and survival of both franchisor and franchisee and often raises issues of social and political conflicts. When franchisee is not familiar with related laws and regulations, franchisor has high chance to utilize it. Exclusive sales territory protection by the manufacturer and distributors (wholesalers or retailers) means sales area restriction by which only certain distributors have right to sell products or services. The distributor, who has been granted exclusive sales territories, can protect its own territory, whereas he may be prohibited from entering in other regions. Even though exclusive sales territory is a quite critical problem in franchise business, there is not much rigorous research about the reason, results, evaluation, and future direction based on empirical data. This paper tries to address this problem not only from logical and nomological validity, but from empirical validation. While we purse an empirical analysis, we take into account the difficulties of real data collection and statistical analysis techniques. We use a set of disclosure document data collected by Korea Fair Trade Commission, instead of conventional survey method which is usually criticized for its measurement error. Existing theories about exclusive sales territory can be summarized into two groups as shown in the table below. The first one is about the effectiveness of exclusive sales territory from both franchisor and franchisee point of view. In fact, output of exclusive sales territory can be positive for franchisors but negative for franchisees. Also, it can be positive in terms of sales but negative in terms of profit. Therefore, variables and viewpoints should be set properly. The other one is about the motive or reason why exclusive sales territory is protected. The reasons can be classified into four groups - industry characteristics, franchise systems characteristics, capability to maintain exclusive sales territory, and strategic decision. Within four groups of reasons, there are more specific variables and theories as below. Based on these theories, we develop nine hypotheses which are briefly shown in the last table below with the results. In order to validate the hypothesis, data is collected from government (FTC) homepage which is open source. The sample consists of 1,896 franchisors and it contains about three year operation data, from 2006 to 2008. Within the samples, 627 have exclusive sales territory protection policy and the one with exclusive sales territory policy is not evenly distributed over 19 representative industries. Additional data are also collected from another government agency homepage, like Statistics Korea. Also, we combine data from various secondary sources to create meaningful variables as shown in the table below. All variables are dichotomized by mean or median split if they are not inherently dichotomized by its definition, since each hypothesis is composed by multiple variables and there is no solid statistical technique to incorporate all these conditions to test the hypotheses. This paper uses a simple chi-square test because hypotheses and theories are built upon quite specific conditions such as industry type, economic condition, company history and various strategic purposes. It is almost impossible to find all those samples to satisfy them and it can't be manipulated in experimental settings. However, more advanced statistical techniques are very good on clean data without exogenous variables, but not good with real complex data. The chi-square test is applied in a way that samples are grouped into four with two criteria, whether they use exclusive sales territory protection or not, and whether they satisfy conditions of each hypothesis. So the proportion of sample franchisors which satisfy conditions and protect exclusive sales territory, does significantly exceed the proportion of samples that satisfy condition and do not protect. In fact, chi-square test is equivalent with the Poisson regression which allows more flexible application. As results, only three hypotheses are accepted. When attitude toward the risk is high so loyalty fee is determined according to sales performance, EST protection makes poor results as expected. And when franchisor protects EST in order to recruit franchisee easily, EST protection makes better results. Also, when EST protection is to improve the efficiency of franchise system as a whole, it shows better performances. High efficiency is achieved as EST prohibits the free riding of franchisee who exploits other's marketing efforts, and it encourages proper investments and distributes franchisee into multiple regions evenly. Other hypotheses are not supported in the results of significance testing. Exclusive sales territory should be protected from proper motives and administered for mutual benefits. Legal restrictions driven by the government agency like FTC could be misused and cause mis-understandings. So there need more careful monitoring on real practices and more rigorous studies by both academicians and practitioners.

• Journal of Chest Surgery
• /
• v.39 no.1 s.258
• /
• pp.18-27
• /
• 2006

Background: Anomalous origin of the left coronary artery from the pulmonary artery (ALCAPA) is a rare congenital anomaly, but is one of the most common causes of myocardial ischemia which would result in high mortality within the first year of life. This is our early result of the surgical management for these patients. Material and Method: From June 1989 to July 2003, 6 patients with ALCAPA and one patient with ARCAPA (Anomalous origin of the Right coronary artery from the pulmonary artery) underwent surgical repair. We have reviewed the all medical records, electrocardiogram, chest X-ray and echocardiography retrospectively. Result: Three of the patients were boys and four were girls. The median age at the operation was 5.4 months (Range: 3$\∼$33 months). The average body weight of at the operation was 6.7 kg (Range: 3.7$\∼$11.3 kg). A mean follow up period was 18 months. Only 3 patients were initially diagnosed as ALCAPA. And 3 patients had moderate mitral regurgitation. Immediate coronary artery reimplantation on diagnosis with the aim of restoring a two-coronary system circulation was done. The average bypass time was 114$\pm$37 minutes, and the average aortic cross clamping time was 55$\pm$22 minutes. The average stay of intensive care unit was 5$\pm$3 days, the mean mechanical ventilator time was 38$\pm$45 hours and the hospital stay after operation was 12$\pm$5 days. There were significant improvements in electrocardiogram and chest X-ray of the all patients except one late death patient. The ventricular function showed almost normal recovery after operation; the EF (Ejection Fraction) increased from 41.2$\pm$ 10.3$\%$ to 60.5$\pm$ 15.8$\%$ within 1 month and to 59.8$\pm$13.9$\%$ within 1 year after operation, the SF (Shortening Fraction) increased from 23.6$\pm$4.7$\%$ to 38.6$\pm$8.4$\%$ within 1 month and to 37.4$\pm$7.9$\%$ within 1 year after operation, LVEDDI (Left Ventricular End-diastolic Dimension Index) decreased from 100.8$\pm$25.6 mm/$m^{2}$ to 90.3$\pm$ 19.2 mm/$m^{2}$ within f month and to 79.3$\pm$ 15.8 mm/$m^{2}$ within 1 year after operation. Concomitant mitral repair was done in two patients with anterior mitral leaflet prolapse. In every patient, mitral valve showed less than mild regurgitation during follow up. One late death occurred in which patient Dor procedure was applied 10 months after initial operation due to the dilated cardiomyopathy Conclusion: In the management of this rare and could be fatal Anomalous origin of the left coronary artery from the pulmonary artery (ALCAPA), early suspicion and correct diagnosis is of most important. But, after diagnosis, immediate restoration of 2 coronary systems could result in good outcome.