• YAKHAK HOEJI
• /
• v.37 no.3
• /
• pp.247-253
• /
• 1993

Eight new derivatives of allylamine which are related to naftifine and expected to have antifungal activity were synthesized. Schiff base 2a-2d and 2'e-2'h were obtained by conventional methods using trans-cinnamylamine or trans-cinnamaldehyde. The reduction of azomethine linkage with NaBH$_{4}$ yielded secondary amine 3a-3h, which were then methylated by means of HCHO and excess NaBH$_{4}$ or HCOOH to give 4a-4h.

• Journal of Adhesion and Interface
• /
• v.6 no.4
• /
• pp.7-11
• /
• 2005

Multi-walled carbon nanotubes (CNTs), which were purified by etching in 25% $H_2SO_4/HNO_3$ solution at $60^{\circ}C$ for 2 h, were modified via plasma polymerization coating of acrylic acid, allylamine or acetylene, and then utilized to prepare PEI/CNT composites. First, plasma polymerization conditions were optimized by measuring the solvent resistance of coatings in THF, chloroform and NMP, and the tensile strength of PEI/CNT (0.5%) composites as a function of plasma power (20~50 W) and monomer pressure (20~50 mTorr). The tensile strength of PEI/CNT composites was further evaluated as a function of CNT loading (0.2, 0.5 and 1%). Finally, FT-IR was utilized to provide a better understanding of the improved tensile properties of PEI/CNT composites via plasma polymerization coating of CNTs. Plasma polymerization of acrylic acid greatly enhanced the tensile strength of PEI/CNT composites, as did allylamine but to a lesser degree, while acetylene plasma polymerization coating decreased tensile strength.

• YAKHAK HOEJI
• /
• v.40 no.5
• /
• pp.507-512
• /
• 1996

Some allylamine compounds which are benzothiazole substituants in stead of naphthyl ring in naftifine, antifungal agents, were synthesized as potential antimycotics. The interme diate Schiff bases that were obtained by condensation of 2-aminobenzothiazole and trans-cinnamaldehyde, were reduced to imine compounds to give allylamines (5a-5d) after methylation. These compounds which were tested in vitro against five fungal cell lines containing Trichophyton mentagrophytes, showed no activity in 0.1~100${\mu}$g/ml range.

• YAKHAK HOEJI
• /
• v.47 no.5
• /
• pp.293-299
• /
• 2003

Structure-activity relationship studies of allylamine type of antimycotics were carried out to evaluate the effect of naphthyl and methyl portion of naftifine. Compounds with 4-fluorophenyl(2a-5a), 2-fluorophenyl(2b-5b), 2,4-dichlorophenyl(2c-5c), 2,6-dichlorophenyl(2d-5d), 4-nitrophenyl(2e-5e), and 2,3-dihydro-benzo[1,4]dioxan-6-yl( 2f-5f) instead of naphthyl group with hydrogen(3a-3f), methyl(4a-4f), and ethyl(5a-5f) in the place of methyl in naftifine were synthesized and tested their in vitro anti-fungal activity against five different fungi. Eight compounds(3a, 5a, 3c, 4c, 4d, 5d, 5e, and 4f) showed significant antifungal activity against T. mentagrophytes. (E)-N-Ethyl-(3-phenyl-2-propenyl)-4-nitro-benzenemethaneamine(5e) displayed moderate antifungal activity against all five different fungi.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.493-498
• /
• 1995

Ultrathin networks of itaconic acid copolymers and poly(allylamine) were produced by a Langmuir-Blodgett (LB) technique employing a double-chain amine as a monolayer template which was subsequently removed by extraction after thermal crosslinking. Itaconic acid copolymers used were copoly (itaconic acid-ethyl vinyl ether) and copoly (itaconic acid-n-butyl vinyl ether). The polyion-complexed monolayers of three components consisting of template amine, itaconic acid copolymer and poly (allylamine) were formed at the air-water interface. The Langmuir film properties have been studied by the surface pressure-area isotherm and fluorescence microscopy. The monolayers were transferred on solid substrates and were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). Two-dimensional polymer networks were formed through imide or amide linkages by heat treatment under vacuum. The heat-treated films were extracted with chloroform after immersion in aq. sodium chloride to remove the template amines. SEM observation of a LB film on a porous fluorocarbon membrane filter with pore diameter of 0.1 μm showed covering of the pores by six layers in the polyion complex state.

• The Journal of Korean Medicine
• /
• v.19 no.1
• /
• pp.251-270
• /
• 1998

The effects of Gamigunshimtang on the isolated perfused ischemic heart in rats, heart rates, left ventricular pressure, cardiac blood flow and cardiotoxicity were stu.died in H9C2 myoblast cell, myocardial slice culture The results were as follows: 1. The administration of Gamigunshimtang to the rat recovered effectively heart rate, left ventricular pressure and flow rate from the experimental ischemia in perfused rat heart. The release of lactic dehydrogenase after the ischemia also decreased compared to the control group. 2. The administration of Gamigunshimtang to H9C2 myoblast culture enhanced the cell proliferation and protected against doxorubicin and allylamine induced release of the lactic dehydrogenase into the culture medium. It also protected effectively against doxorubicin and allylamine induced decrease of Ca ATPase activity and the increase of NADPH-cytochrome C reductase activity in the microsome. 3. The administration of Gamigunshimtang to the rat myocardial slice culture protected effectively against doxorubicin and allylamine induced decreases of protein synthesis and ATP content, and increases of cvtosolic enzyme, creatin kinase into the medium and lipid peroxidation.

• Journal of Adhesion and Interface
• /
• v.2 no.2
• /
• pp.1-10
• /
• 2001

Silica for Epoxy Molding Compound (EMC) was coated via plasma-polymerization with RF plasma (13.56 MHz) as a function of treatment time, power and pressure. 1,3-diaminopropane, allylamine, pyrrole, 1,2-epoxy-5-hexene, allylmercaptan or allylalcohol were utilized for plasma polymerization coating and adhesion of coated silica was evaluated by measuring flexural strength. CTE and water absorption of EMC were also measured, and fracture surface of flexural specimen was analyzed by SEM in order to elucidate the failure mode. The plasma polymer coated silica was analyzed by FT-IR and reactivity of plasma polymer coating with epoxy resin was evaluated with DSC in order to investigate the adhesion mechanism. The EMC prepared from the silica coated with 1,3-diaminopropane or allylamine exhibited high flexural strength, low CTE, and low water absorption compared with the control sample, and also exhibited 100% cohesive failure mode. These results can be attributed to the chemical reaction between the functional groups in the plasma polymer coating and epoxy resin, and also consistent with the results from FT-IR and DSC analysis.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.426-431
• /
• 2006

Acryl and vinyl sulfone functionalized blue and orange azo dyes were prepared by the coupling reaction of 6-bromo-2-cyano-4-nitroaniline and 2,5-dimethoxy-4-(vinylsulfonyl)benzenamine with 3-acrylamido-(N,N-diethylamino)benzene and 3-methyl-(N,N-diethylamino)benzene, respectively, for the coloring of poly(methyl methacrylate) (PMMA). Allyl functionalized dye was also prepared by reacting vinyl sulfone-containing dye with allylamine. Three types of dyeing method were used: the copolymerization of reactive dye with methyl methacrylate (MMA) and dyeing by polymerization of MMA in the presence of polymeric dye and dye 2 without reactive function. The color fastness for the three PMMAs were evaluated by comparing the solubility of dye under various conditions.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.84-91
• /
• 1998

Random copolymers of N-isopropyl acrylamide (NIPAAm) and acrylic acid (AAc) which exhibit temperature- and pH-responsive behavior were synthesized by free-radical polymerization. The copolymers were characterized by means of FT-IR spectrometry and titration. The influence of polyelectrolyte on the lower critical solution temperature (LCST) of pH/temperature-sensitive polymers was investigated in the pH range of 2-12. The LCSTs of PNIPAAm/water in poly(NIPAAm-co-AAc) were determined by cloud-point measurements. A polyelectrolyte complex was prepared by mixing poly(NIPAAm-co-AAc) with poly(allylamine) (PAA) or poly(L-lysine) (PLL) solutions as anionic and cationic polyelectrolytes, respectively. Back titration was performed to determine the content of AAc and to study the effect of comonomer ionization on the LCST. The LCSTs of PNIPAAm/water in the copolymers were strongly affected by pH, presence of polyelectrolyte, AAc content, and charge density on the polymer. The polyelectrolyte complexes were formed at neutral condition. The influence of more hydrophobic PLL as polyelectrolyte on the cloud-point of PNIPAAm/water in the copolymer was stronger than that of poly(allylamine) (PAA).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.168-172
• /
• 2010

Superhydrophilic thin film consisted of positively charged poly (allylamine hydrochloride) (PAH) and negatively charged poly (acrylic acid) (PAA) was fabricated by a layer-by-layer (LBL) self-assembly. Glutaraldehyde (GA) was used in order to increase an adhesion hardness by amine-aldehyde reaction. The surface morphology, thickness, transmittance, water contact angle and adhesion hardness of PAH/PAA thin film with or without GA were measured. The adhesion hardness of PAH/PAA thin film with GA deposition increased over 2 times although the film thickness of PAH/GA/PAA decreased than that of PAH/PAA thin film. The increase of adhesion hardness by amine-aldehyde reaction between PAH and GA was measured by fourier transform infrared (FT-IR) spectroscopy. Fabricated PAH/PAA and PAH/GA/PAA thin films showed water contact angel under $5^{\circ}$ and high transmittance over 91.3% at 550 nm.