• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.782-790
• /
• 1999

The compressibility sinterability sintering behaviour and thermal stability of AlOOH added UO2 pellt and PVA-Al(III) complex added UO2 pellet were investigated respectively. Compared with characteristics of AlOOH added UO2 pellet the green density and the sintered density of PVA-Al(III) complex added UO2 pellet were lowered but the grain size and the pore size of that were more increased in accordance with higher compacting pressure. The AlOOH added UO2 pellet had the grain size of about 14${\mu}{\textrm}{m}$ with monomodal pore size distribution while the PVA-Al(III) complex added UO2 pellet had the grain size of about 42 ${\mu}{\textrm}{m}$ with bimodal pore size distribution. The PVA-A(III) complex added UO2 pellet had a similiar open porosity to the AlOOH added UO2 pellet and a lower resintered density change than the AlOOH added UO2 pellet.

• 한국전기전자재료학회논문지
• /
• 제37권3호
• /
• pp.292-296
• /
• 2024

In this study, Iron (III) oxide-hydroxide (δ-FeOOH) was successfully synthesized using hydrogen peroxide (H₂O₂) as an oxidizing agent. The synthesis of δ-FeOOH was carried out by controlling the amount of H₂O₂, and pure δ-FeOOH was successfully synthesized in ranges from 0.2 mL to 0.6 mL of H₂O₂. The size of the synthesized δ-FeOOH particles was compared by controlling the amount of oxidant H₂O₂. The average particle size of the synthesized pure δ-FeOOH particles increased from 875.1 nm to 897.2 nm as the amount of H₂O₂ was increased. The optical properties of δ-FeOOH synthesized under these specific conditions were investigated. All δ-FeOOH showed a similar trend of increasing and decreasing light absorption from 800 nm to 400 nm, although there was a slight difference in the amount of light absorption, with the largest amount of light absorption at 410 nm. The band gap energy of δ-FeOOH through the Tauc plot method was about 2.1~2.2 eV when H₂O₂ was 0.2~1.4mL. With a sufficient small particle size, simple control of that particle size, and a small band gap energy enough to absorb light in the visible spectrum, δ-FeOOH could be useful in a variety of applications, including photoelectrochemistry and battery electrodes.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.100-108
• /
• 1989

Aluminum hydroxides were prepared by the alkoxide hydrolysis method using Al-isopropoxide as a starting material and NH4OH as a catalytic agent. When Al-isopropoxide was hydrolyzed in a H2O-NH3 system, only Al(OH)3 was obtained over all pH values. However, AlOOH was formed besides Al(OH)3 when Al-isopropoxide was hydrolyzed in a H2O-NH3-isopropyl alcohol system. The AlOOH/Al(OH)3 ratio was increased as the isopropyl alcohol content was increased. The hydroxides, Al(OH)3 and AlOOH, obtained in this study and the commerical products, $\alpha$-Al2O3 and AlOOH were subjected to the carbothermal reduction and nitridation reaction to product AlN powder, using carbon black as a reducing agent under N2 atmosphere at various temperatures. AlN was synthesized from the obtained Al(OH)3 and the commercial AlOOH at 145$0^{\circ}C$, however, synthesized from the obtained AlOOH and the commercial alpha-alumina at 135$0^{\circ}C$. The temperature difference is assumed to be attributed to the reactivity of those powders. AlN powder prepared from the Al-isopropoxide was observed to have the narrower particle size distribution than that prepared from the commercial $\alpha$-Al2O3 or AlOOH.

• 한국식품과학회지
• /
• 제28권3호
• /
• pp.440-445
• /
• 1996

Methyl linoleate를 기질로하여 온도 및 과산화물가에 따른 monohydroperoxide 이성체의 조성변화를 $60^{\circ}C$와 $90^{\circ}C$ 그리고 $120^{\circ}C$와 $150^{\circ}C$에서 조사하여 보았다. Silica gel column으로 분획한 monohydroperoxide 분획물을 NaBH로 환원시켜 HPLC를 이용하여 분석 및 분획하였다. 각각의 이성체 분획은 trimethylsolyl ester 형태로 유도체화시킨 후 GC-MS로 확인하였다. 확인된 이성체중 기하이성체의 조성변화는 $60^{\circ}C$와 $90^{\circ}C$의 경우 9/13-OOH-trans, trans-diene이 9/13-OOH-cis, trans-diene보다 높게 나타났으나 $150^{\circ}C$의 초기단계에서는 9/13-OOH-cis, trans-diene이 9/13-OOH-trans, trans-diene 보다 다소 높게 나타났다. 한편 위치이성체의 경우에는 온도 및 과산화물가의 변화에 따라 거의 비슷한 비율을 나타내었다.

• 한국임상약학회지
• /
• 제32권2호
• /
• pp.93-105
• /
• 2022

Objectives: This study aimed to identify the opinions of Gyeongsangbuk-do residents on out-of-hours (OOH) pharmacies and to examine the operating experiences of pharmacists who are operating OOH pharmacies in other areas. Methods: Cross-sectional survey was carried out for 1,000 Gyeongbuk residents employing a questionnaire via online or face-to-face, and 82 pharmacists who currently operate OOH pharmacies employing a postal questionnaire. Out of eighty-two, 46 pharmacists replied (response rate 56.1%). Results: As for the necessity of introducing OOH pharmacies in Gyeongsangbuk-do, 84.9% answered more than necessary. 86.1% favored the local government support for OOH pharmacies. The necessity of OOH pharmacies was highly evaluated among participants who experienced to be unable to use medicines or services in out of service hours, regardless of their characteristics or health condition. County residents consistently put a positive opinion for the necessity of OOH pharmacies if they have elderly family member(s), while city residents had significant differences across subgroups depending on their conditions (family members, household economics, health status, etc.). Almost all (95.7%) pharmacist participants highly evaluated the necessity of OOH pharmacies and the majority of them (63.0%) felt satisfied. However, 60.9% of participants have ever considered closing their OOH pharmacy business due to private, business management and professional reasons. Conclusion: This study made suggestions to address anticipated issues for the Gyeongbuk-style OOH pharmacy model.

• 복식
• /
• 제67권2호
• /
• pp.1-16
• /
• 2017

This study was conducted to investigate how consumer global-mindedness affects global fashion out-of-home (OOH) advertising which global consumer culture positioning applies, and to examine the relations among global fashion brand OOH advertising, perceived fashion brand globalness, perceived quality and brand reputation. Data were collected from 238 general people in 20~30s in seoul and were analyzed by using statistic methods such as frequency analysis, reliability analysis, confirmatory factor analysis and structural d modelling by running both SPSS 18.0 and AMOS 7.0 program. The results of this study were as follows. First of all, it indicated that the fit indexes were satisfied and the overall model of this study showed a favorable goodness of it from the results of confirmatory analysis. Secondly, consumer global-mindedness had a positive impact on preference towards global fashion OOH advertising. Finally, preference towards global fashion brand OOH advertising positively affected perceived fashion brand globalness, perceived quality and fashion brand reputation. The results implies that it is necessary that fashion brands fully understand consumers' tendency and the benefits of marketing can be maximized through global positioning OOH advertising on subways which makes consumers recognize fashion brands as global ones.

• 보존과학회지
• /
• 제29권4호
• /
• pp.297-309
• /
• 2013

철제유물은 출토되는 순간 급격한 환경변화로 인해 빠른 속도로 부식이 진행되므로 보존처리 과정을 거쳐 부식을 억제한다. 그러나 보존처리가 완료된 철제유물도 재부식이 발생하는 경우가 다수이며, 재부식된 유물의 보존처리는 1차 보존처리 시보다 그 처리가 어렵고 처리기간 또한 길어진다. 본 연구는 보존처리가 완료된 이후 보관과정에서 발생하는 부식생성물을 과학적으로 분석하여 재부식의 요인을 찾고자 하였다. 경주지역의 세 유적에서 출토된 철제유물을 동일한 약품과 방법으로 2002~2009년 동안 보존처리를 완료하였으나, 포장 보관 상태의 일부 철제유물에서 재부식 징후가 관찰되었다. 이중 재부식의 징후가 확인된 단조 철제유물 9점을 선별하여 질량측정, 육안관찰, 현미경을 통한 물리적 변화를 관찰하였고, SEM-EDS, XRD, IC, ICP분석을 통해 화학적 변화를 분석하였다. 그 결과, 유물에서 탈락된 부분의 접면에 형성된 황갈색 부식생성물은 군집한 형상만 다를 뿐 결정상은 공통적으로 침상형이 확인되었으며, 적색에서 황갈색으로 갈수록 침상의 형태가 뚜렷하였다. 보존처리가 완료된 시점의 경과에 따라 부식생성물이 증가할수록 유물의 질량이 증가하였고 염화이온의 농도가 상대적으로 높아지는 경향이 나타났다. 채집된 모든 시료의 부식생성물에 대한 XRD분석에서는 ${\beta}$-FeOOH(akaganeite)이 확인되었고, ICP분석 결과 $Na^+$, $Ca^{2+}$성분을 확인할 수 있었다.

• Environmental Analysis Health and Toxicology
• /
• 제24권2호
• /
• pp.159-167
• /
• 2009

To investigate the alleviative effects of Peonia japonica water extract(PJWE) on inflammation and skin barrier damage, both the irradiation of UVB and the application of squalene monohydroperoxide (Sq-OOH) to the backs of hairless mice were performed for 4 weeks. And at the same time experimental materials were applied topically. The skin erythema indices for the positive control (PC, 0.01% retinoic acid) and experimental (E, PJWE) groups were lower than that of the control (C) group. Whereas both the lipid and water capacities for the PC and E groups were higher than those of the C group. Epidermis and dermis of the C group were remarkably thickened in comparison with the PC and E groups. Relatively much less number of inflammatory cells, including lymphocytes, neutrophils and macrophages were found in dermis of the PC and E groups compared with the C group. Lipid lamellae of the C group were broken severely showing an irregular arrangement and lipid content was much reduced. Whereas those of the PC and E groups were almost intact with a regular arrangement, which were similar to that of the N group. Taken the results all together, it was confirmed that PJWE could be effective natural herbal material for the alleviation of inflammation and skin barrier damage in hairless mice skin which were induced by UVB and Sq-OOH.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.660-664
• /
• 2000

Effect of various kinds of additive such as AlOOH, Al(OH)3, Al2Si2O5(OH)4, Nb2O5, TiO2 and MgO on the properties and microstructures of UO2 pellet has been examined. All the tested dopants had played a role to reduce sintered density and open porosity. It was revealed that the addition of TiO2 made pellet more stable thermally. UO2 pellet doped with 0.2wt% TiO2 was swelled rather than densified after annealing for 24 hrs at 1$700^{\circ}C$. It was attributed to large pore with spherical shape. Titinia and silicon coexisted with Al element were more effective to increase grain size than other additives. It could be also revealed that the formation of liquid phase was the main cause of grain growth.

• 한국재료학회지
• /
• 제3권6호
• /
• pp.624-631
• /
• 1993

Alumimium Titanate-Mullite 복합체는 $Al_{2}O_{3}$분말 알콜용액에서 $Si(OC_{2}H_{5})_{4}$와 $Ti(OC_{2}H_{5})_4$ 의 단계적인 가수분해로 합성하였다. Sol-Gel 방법으로 합성된 모든 분말은 비정질과 단분산이고 좁은 분말크기의 분포를 보였다. 소결체($1600 ^{\circ}C$/2h)는 임계분해온도인 $1100^{\circ}C$에서 100시간 동안과 750와 $1400^{\circ}C$ 100시간동안 반복적인 열적 내구성 및 열충격 시험을 수행하였다. 가장 좋은 열적 내구성은 aluminium titanate함유량이 70rhk 80vol%일때 얻어졌으며, 이들은 위 실험을 한후 아주 적은 미세구조와 열팽창 곡선의 변화를 나타내었다. 소결체 미세구조의 붕괴는 주사현미경, X-선회절분석과 Dil-atometer로 연구하였다. 위 연구는 이와같은 과정에 의하여 합성된 aluminium titanate-mullite복합체의 서비스 수명을 예상하기 위하여 시도되었다.