• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.782-790
• /
• 1999

The compressibility sinterability sintering behaviour and thermal stability of AlOOH added UO2 pellt and PVA-Al(III) complex added UO2 pellet were investigated respectively. Compared with characteristics of AlOOH added UO2 pellet the green density and the sintered density of PVA-Al(III) complex added UO2 pellet were lowered but the grain size and the pore size of that were more increased in accordance with higher compacting pressure. The AlOOH added UO2 pellet had the grain size of about 14${\mu}{\textrm}{m}$ with monomodal pore size distribution while the PVA-Al(III) complex added UO2 pellet had the grain size of about 42 ${\mu}{\textrm}{m}$ with bimodal pore size distribution. The PVA-A(III) complex added UO2 pellet had a similiar open porosity to the AlOOH added UO2 pellet and a lower resintered density change than the AlOOH added UO2 pellet.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.292-296
• /
• 2024

In this study, Iron (III) oxide-hydroxide (δ-FeOOH) was successfully synthesized using hydrogen peroxide (H₂O₂) as an oxidizing agent. The synthesis of δ-FeOOH was carried out by controlling the amount of H₂O₂, and pure δ-FeOOH was successfully synthesized in ranges from 0.2 mL to 0.6 mL of H₂O₂. The size of the synthesized δ-FeOOH particles was compared by controlling the amount of oxidant H₂O₂. The average particle size of the synthesized pure δ-FeOOH particles increased from 875.1 nm to 897.2 nm as the amount of H₂O₂ was increased. The optical properties of δ-FeOOH synthesized under these specific conditions were investigated. All δ-FeOOH showed a similar trend of increasing and decreasing light absorption from 800 nm to 400 nm, although there was a slight difference in the amount of light absorption, with the largest amount of light absorption at 410 nm. The band gap energy of δ-FeOOH through the Tauc plot method was about 2.1~2.2 eV when H₂O₂ was 0.2~1.4mL. With a sufficient small particle size, simple control of that particle size, and a small band gap energy enough to absorb light in the visible spectrum, δ-FeOOH could be useful in a variety of applications, including photoelectrochemistry and battery electrodes.

• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.100-108
• /
• 1989

Aluminum hydroxides were prepared by the alkoxide hydrolysis method using Al-isopropoxide as a starting material and NH4OH as a catalytic agent. When Al-isopropoxide was hydrolyzed in a H2O-NH3 system, only Al(OH)3 was obtained over all pH values. However, AlOOH was formed besides Al(OH)3 when Al-isopropoxide was hydrolyzed in a H2O-NH3-isopropyl alcohol system. The AlOOH/Al(OH)3 ratio was increased as the isopropyl alcohol content was increased. The hydroxides, Al(OH)3 and AlOOH, obtained in this study and the commerical products, $\alpha$-Al2O3 and AlOOH were subjected to the carbothermal reduction and nitridation reaction to product AlN powder, using carbon black as a reducing agent under N2 atmosphere at various temperatures. AlN was synthesized from the obtained Al(OH)3 and the commercial AlOOH at 145$0^{\circ}C$, however, synthesized from the obtained AlOOH and the commercial alpha-alumina at 135$0^{\circ}C$. The temperature difference is assumed to be attributed to the reactivity of those powders. AlN powder prepared from the Al-isopropoxide was observed to have the narrower particle size distribution than that prepared from the commercial $\alpha$-Al2O3 or AlOOH.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.440-445
• /
• 1996

An attempt was made to study the relative composition of Monohydroperoxide isomers of methyl linoleate oxidized to different peroxide values at 60, 90, 120 and $150^{\circ}C$, respectively. HPLC was used to analyze and isolate the monohydroperoxide isomers fractionated by silica gel column after reduction with NaBH.. GC-MS was used to identify four monnhydroperoxide isomers as trimethylsilyl (TMS) in mixtures of oxidized methyl linoleate In the geometrical isomers, the proportions of 9/13-OOH-trans, trant-diene were higher than those of 9/13-OOH-cis, trans-diene at $60^{\circ}C$ and $90^{\circ}C$. However in the initial stage at $150^{\circ}C$, the proportions of 9/13-OOH-cis, trans-diene were slightly higher than those of 9/13-OOH-trans, trans-diene. In case of positional isomers, equal proportions of 9-OOH-10, 12-diene and 13-OOH-9, 11-diene were found in all samples of methyl linoleate oxidized at different temperatures and peroxide levels.

• Korean Journal of Clinical Pharmacy
• /
• v.32 no.2
• /
• pp.93-105
• /
• 2022

Objectives: This study aimed to identify the opinions of Gyeongsangbuk-do residents on out-of-hours (OOH) pharmacies and to examine the operating experiences of pharmacists who are operating OOH pharmacies in other areas. Methods: Cross-sectional survey was carried out for 1,000 Gyeongbuk residents employing a questionnaire via online or face-to-face, and 82 pharmacists who currently operate OOH pharmacies employing a postal questionnaire. Out of eighty-two, 46 pharmacists replied (response rate 56.1%). Results: As for the necessity of introducing OOH pharmacies in Gyeongsangbuk-do, 84.9% answered more than necessary. 86.1% favored the local government support for OOH pharmacies. The necessity of OOH pharmacies was highly evaluated among participants who experienced to be unable to use medicines or services in out of service hours, regardless of their characteristics or health condition. County residents consistently put a positive opinion for the necessity of OOH pharmacies if they have elderly family member(s), while city residents had significant differences across subgroups depending on their conditions (family members, household economics, health status, etc.). Almost all (95.7%) pharmacist participants highly evaluated the necessity of OOH pharmacies and the majority of them (63.0%) felt satisfied. However, 60.9% of participants have ever considered closing their OOH pharmacy business due to private, business management and professional reasons. Conclusion: This study made suggestions to address anticipated issues for the Gyeongbuk-style OOH pharmacy model.

• Journal of the Korean Society of Costume
• /
• v.67 no.2
• /
• pp.1-16
• /
• 2017

This study was conducted to investigate how consumer global-mindedness affects global fashion out-of-home (OOH) advertising which global consumer culture positioning applies, and to examine the relations among global fashion brand OOH advertising, perceived fashion brand globalness, perceived quality and brand reputation. Data were collected from 238 general people in 20~30s in seoul and were analyzed by using statistic methods such as frequency analysis, reliability analysis, confirmatory factor analysis and structural d modelling by running both SPSS 18.0 and AMOS 7.0 program. The results of this study were as follows. First of all, it indicated that the fit indexes were satisfied and the overall model of this study showed a favorable goodness of it from the results of confirmatory analysis. Secondly, consumer global-mindedness had a positive impact on preference towards global fashion OOH advertising. Finally, preference towards global fashion brand OOH advertising positively affected perceived fashion brand globalness, perceived quality and fashion brand reputation. The results implies that it is necessary that fashion brands fully understand consumers' tendency and the benefits of marketing can be maximized through global positioning OOH advertising on subways which makes consumers recognize fashion brands as global ones.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.297-309
• /
• 2013

Iron objects become corroded at fast speed from the moment when they are excavated, so it is needed to control corrosion through processes of conservation treatment. However, re-corrosion mostly takes place in excavate iron objects, although they have already gone through the process of conservation treatment, and it is more difficult to carry out the second conservation treatment of re-corroded excavated iron objects than the first conservation treatment, and it requires a longer period of time to treat them as well. In this study, aims to discover factors of re-corrosion by scientifically analyzing corrosion products generated during the process of storage after the process of conservation treatment. The finished on conservation treatment of the iron artifacts, which were unearthed from three ancient site in Gyeongju by using the same conservation method between 2002 and 2009, re-corrosion condition observed on the packaging-iron artifacts. Focused on 9 target forged iron artifacts among them, this study analyzed the physical changes by mass measurement, naked-eye and microscopic observations and the chemical changes by SEM-EDS, XRD, IC and ICP analysis. The results show that the yellowish brown corrosion products formed on the facing surface of part dropped from the artifacts had different associated forms but acicular shape. In addition, the acicular shape became clearer as the color changed from red to yellowish brown. According to the process when the conservation treatment was completed, the mass of the artifacts increased in proportion to the corrosion products and the chloride ion ($Cl^-$) concentration had a tendency to increase relatively. ${\beta}$-FeOOH (akaganeite) was confirmed in the XRD analysis for the corrosion products of all the collected samples. As a result of ICP analysis, $Na^+$ and $Ca^{2+}$ components were confirmed.

• Environmental Analysis Health and Toxicology
• /
• v.24 no.2
• /
• pp.159-167
• /
• 2009

To investigate the alleviative effects of Peonia japonica water extract(PJWE) on inflammation and skin barrier damage, both the irradiation of UVB and the application of squalene monohydroperoxide (Sq-OOH) to the backs of hairless mice were performed for 4 weeks. And at the same time experimental materials were applied topically. The skin erythema indices for the positive control (PC, 0.01% retinoic acid) and experimental (E, PJWE) groups were lower than that of the control (C) group. Whereas both the lipid and water capacities for the PC and E groups were higher than those of the C group. Epidermis and dermis of the C group were remarkably thickened in comparison with the PC and E groups. Relatively much less number of inflammatory cells, including lymphocytes, neutrophils and macrophages were found in dermis of the PC and E groups compared with the C group. Lipid lamellae of the C group were broken severely showing an irregular arrangement and lipid content was much reduced. Whereas those of the PC and E groups were almost intact with a regular arrangement, which were similar to that of the N group. Taken the results all together, it was confirmed that PJWE could be effective natural herbal material for the alleviation of inflammation and skin barrier damage in hairless mice skin which were induced by UVB and Sq-OOH.

• Journal of the Korean Ceramic Society
• /
• v.37 no.7
• /
• pp.660-664
• /
• 2000

Effect of various kinds of additive such as AlOOH, Al(OH)3, Al2Si2O5(OH)4, Nb2O5, TiO2 and MgO on the properties and microstructures of UO2 pellet has been examined. All the tested dopants had played a role to reduce sintered density and open porosity. It was revealed that the addition of TiO2 made pellet more stable thermally. UO2 pellet doped with 0.2wt% TiO2 was swelled rather than densified after annealing for 24 hrs at 1$700^{\circ}C$. It was attributed to large pore with spherical shape. Titinia and silicon coexisted with Al element were more effective to increase grain size than other additives. It could be also revealed that the formation of liquid phase was the main cause of grain growth.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.624-631
• /
• 1993

The composites in the system aluminium titanate-mullite were synthesized by stepwise alkoxide hydrolysis of tetraethylorthosilicate, Si(OCLH5), and titaniumtetraethoxide, $Ti(OC_{2}H_{5})_4$ in $Al_{2}O_{3}$ ethanolic colloidal solution. All particles produced by sol-gel-process were amorphous, monodispesed and had a narrow particle size distribution. Sintered bodies at $1600 ^{\circ}C$ for 2h were subjected to prolonged durability tests-on the one hand annealing at the critical decomposition temperature of $1100 ^{\circ}C$ for lOOh and on the other cyclic thermal shock between 750 and $1400 ^{\circ}C$ for 100h. The best thermal durability was achieved by a composition containing 70 and 80 vol% aluminium titanate, which showed little change in microstructure and thermal expansion cycles during the tests. The microstructural degradation of samples studied using scanning electron microscopy, X-ray diffraction, and dilatometry, was presented here. The study was conducted in order to predict the service life of aluminium titanate-mullite ceramics formed by this processing route.