• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.247-256
• /
• 2012

Stable carbon isotope ratio of oil components are known to be unaffected by weathering processes and thus has been widely used to determine the origin of spilled oil. In this study, molecular index and composition of stable carbon isotope in 15 crude oils and petroleum product were analyzed and used as oil fingerprints to determine the discriminating power of each fingerprinting method among target crude oils. Through the fingerprints of alkane distribution only Bintulu and B-C(1%) were distinguishable from other crude oils. The pristane/phytane ratio can classify the crude oils into three groups but differentiation of crude oils within a group was impossible using the ratio. The crude oils of A.L., A.S.L., Foroozan and B-C(1%) were differentiated from the other oils using PAH source recognition indexes of C2D/C2P and C3D/C3P. The usage of 4-mD/1-mD and 2/3-mD/1-mD ratio was able to distinguish A.S.L., Bintulu and Oman from the other crude oils. However the PAH source recognition ratios in the other crude oils were similar and thus they were impractical to be used for source identification among the target crude oils. Stable carbon isotope ratios of alkanes were able to uniquely specify each crude oil in the plot of ${\delta}^{13}C_{C21}$ and ${\delta}^{13}C_{C25}$ except A.L., A.M., Qatar-Marine, B-C(1%). The oil fingerprinting method using stable carbon isotope ratios of individual alkane compounds showed more discriminating power among the target crude oils than the conventional source recognition indexes of PAHs or alkanes.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.660-667
• /
• 2017

Equilibrium data of the mixture is essential in the design and operation of separation equipment such as distillation or extraction in chemical processes. These equilibrium data can be obtained through experiments or by calculations using the known binary parameters and the thermodynamic models. Generally, to obtain these parameters, phase equilibrium experimental data such as gas-liquid and liquid-liquid are used. In this study, the excess enthalpy of the mixture was measured using the flow type microcalorimeter which is a simpler method than phase equilibria experiments, and the parameters of various theories were obtained by using this data. In order to investigate the relationship between carbon chain length, enthalpy and binary parameters in the alkane system, excess enthalpies for the n-hexane + alkane (n-pentane, n-heptane, n-octane and n-dodecane) were measured at 298.15 K and the banary interaction parameters of Wilson, NRTL, and UNIQUAC were obtained from the experimental data. In addition, we wanted to obtain basic information on the interaction and association phenomena of the system including electrolyte applicable to various fields by using the excess enthalpy experimental data and the existing theory. First, we investigated the excess enthalpy for the NaOH / Water / Ethanol system as a basic experiment and examined the applicability using the electrolyte-NRTL (eNRTL) theory.

• Particle and aerosol research
• /
• v.7 no.4
• /
• pp.131-138
• /
• 2011

The concentration levels of n-alkanes and water soluble organic carbon (WSOC) at Anmyon, a Global Atmospheric Watch (GAW) station operated by Korea Meteorological Administration (KMA), has been characterized for the PM10 samples collected in 2010. It was found that the concentrations of WSOC at Anmyon were comparable to those in Seoul and lower than those in Gosan, another background area in Korea. However, the maximum concentration of the WSOC at Anmyon was observed in fall while that at Seoul was in winter. It suggests that the emission and/or transformation characteristics at two areas are different. The concentrations of n-alkanes at Anmyon were slightly lower than at Gosan and about one thirds at Seoul. However, it was found that at Gosan the n-alkanes from natural sources were dominant at Gosan. On the other hand, n-alkanes from anthropogenic sources were dominant at Anmyon. Study directions to further understand the characteristics of aerosols at Anmyon are discussed.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.224-228
• /
• 1973

In the fermentation for preparation of petroprotein by Rhodotorula sp. in $C_{12}{\sim}C_{14}$n-alkane mixture it was investigated how the effects due to the difference of chemical form of the nitrogen sources are, that is, how the inorganic nitrogen sources such as nitrates and ammonium salts and organic nitrogen source such as urea effect on the view of fermentation time and yield and how the ratios of nitrogen to carbon with $NaNo_3$ effect. Then following results were obtained: the time required to maximum growth, when $NaNo_3$ or $(NH_4)_2SO_4$ was used as nitrogen source, was 40 hrs. and 45 hrs., respectively, but when urea was used, it was 66 hrs. much longer than above nitrogen sources. On the view of yield, however, in use of the both inorganic sources, when the yield is represented as consumption of 0.1 N-NaOH, it was 0.36 and 0.38 ml, respectively, but, in the case of urea, it amounted to 0.78 ml. In the effect of the ratios of nitrogen to carbon in medium, when n-alkane mixture was added in 1 % (vol.) and N/C with $NaNo_3$ was 0.2 the best results were obtained and generally the higher the value of the ratio the better growth effects were shown.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.405-412
• /
• 2018

Three types of bis[3-(dialkyloxylphosphorothionyl) thio-2-methylpropanyloxy]alkane (BAPA) drived from alkane diol were synthesized. The principal chain of each BAPA had a different carbon number, i.e., 6, 9, and 11. The three types of synthesized BAPA were compared to zinc dialkyl dithiophosphates (ZDDPs) in terms of abrasion resistance. A four-ball test was conducted to evaluate the anti-abrasion performance of the synthesized BAPA according to the length of the principal carbon chain. Each product was added to an additive at a concentration of 1% of the base oil weight, and the wear scar diameter (WSD) was measured as 0.472, 0.459, and 0.480 mm, respectively. Among the BAPA compounds, dialkyl dithiophosphoric acid (DDP), which is the side chain of bis[methacryloyloxy] nonane (BMOO9), was synthesized by varying the carbon number, i.e., 4, 8, and 12, and subsequently the 4-ball test was carried out. The WSD was determined as 0.537, 0.459, and 0.531 mm, respectively. As a result, it was found that when a side chain is short, a thin film is formed. In contrast, a long side chain hindered the formation of a film, and hence the best result was achieved when the carbon number was 8. As for the ZDDPs, the WSD was determined to be 0.563 mm, when measured under the same conditions. The measurements confirm that the synthesized BAPA compounds are superior to the ZDDPs as abrasion resistance additives.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.224-231
• /
• 2010

In GvdW EOS, a recently presented paper, shows that the characteristic status for spherical non-linear particle, of which the mutual behavior is known to be vdWf(van der Waals force) only, could be described well enough in the critical region. However, in current papers, analysis has not been done on GvdW about whether it is accurate or not, even for the particles in the linear form or those with the additional mutual behavior such as static-electricity, so there's some argument about the wide use of that. Therefore, in this paper, for the simulation in the critical region of Normal-alkane group(R=methane, ethane, propane, butane) which are the particles that has a linear charateristic and Normal-amine group($RNH_2$, R=methyl-, ethyl-, propyl-amine) where static-electricity is extremely shown, GvdW parameter values about these particles are defined, and based on this simulation, we compared results to the current EOS presented recently, and analyzed them. Through the simulation, it was shown that in case of Normal-alkane group and Normal-amine group molecules, GvdW presents an accurate critical region characteristic which is far more close to the measurement compared to current EOSs. Especially for butane with big amount in molecules, we found out that only GvdW EOS can reach close enough to the critical point.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.241-244
• /
• 2003

유류오염 토양내 유류의 분해와 무기오염물질의 함량과의 관계성을 알아보기위해 부산 문헌지구의 유류 오염 토양 profile중 유류가 비교적 많은 두 층과 유기물이 다량 함유된 제주도 토양을 경유로 오염시킨 토양을 선택하여 유류가 분해 정도와 Pb, Zn, Cd, Ni의 함량을 측정 비교하였다. 토양 채취후 즉시 유류를 추출한 것, 15일간 별도의 미생물 영양원을 가하지 않고 습도와 통풍만을 행하여 토양내 존재하는 미생물들에 의하여만 유류가 분해되도록 한 것, $105^{\circ}C$에서 24시간 열처리를 행하여 미생물에 의한 분해보다는 물리적인 방법으로 비교적 강하게 처리한 것 세가지 경우에서 토양에서 추출한 유류를 분석한 결과 normal alkane이 서서히 상당량 분해되는 양상을 보여주었다. 토양내 Pb, Zn, Cd, Ni를 분석한 결과 부산 시료의 경우 두 층(B2, B3)모두 Cd은 검출한계 이하로, Ni의 경우 극소량의 함량을 보여주었다. Zn의 경우 B2는 28～29ug/g, B3는 12～14ug/g으로 세가지 경우 별 차이 없는 양상을 보여 주었다. 하지만, Pb의 경우 B2에서는 그 함량이 유류의 normal alkane의 분해와 함께 서서히 증가하는 경향을 확연히 보여주었으며, B3의 경우도 B2와 유사한 변화 양상을 보여주었다. 제주도 토양의 경우 Pb는 검출되지 않았고, Zn은 소량 검출되었다. Ba, Ni 함량은 normal alkane 분해에 따라 다소 증가하였다. 따라서, 본 예비실험을 통하여 유류오염 토양에서 유류의 분해와 일부 무기이온사이에는 관련성을 갖고 있으며, 이는 유류 분해정도를 파악하는 지시자로써 특정 무기 오염물질을 이용할 수 있을 가능성이 있으므로 좀더 이들 관계성에 대한 연구가 진행될 필요성이 있다고 판단된다.고 과학적으로 분석할 수 있는 방법이 될 수 있을 것으로 기대된다. 의미를 되새기는 것으로 짧은 연구를 시작하겠다. 등은 활성 값이 70% 이상으로 퇴적물 독성이 상대적으로 낮았다. 이중나선 DNA 함량은 28.4 % - 49%로 대조군에 비해서 감소가 크다. 대부분의 정점이 대조군의 30% 내외로 정점 간의 차이는 크지는 않다. 그러나 다른 측정자료와 같이 정점 22에서 18%로 최소치를 나타내고, 정점 2, 12에서 20% 내외의 값을 보인다. 종합적으로 볼 때 오염물질의 유입이 크고, 광양제철 인근 정점 들이 모두 다른 정점에 비해서 낮아서, 퇴적물 독성이 높은 정점으로 조사되었다.hiwo의 광합성 능력은 낮은 농도들에서는 대조구와 유사하였으나, 5 $\mu\textrm{g}$/l의 높은 농도에서는 초기에 매우 낮은 광합성 능력을 보이다가 시간이 경과하면서 대조군보다 더 높은 경향을 나타냈다. 이러한 결과는 식물플랑크톤이 benso[a]pyrene의 낮은 농도에서 노출될 때는 이 물질을 탄소원으로 사용할 가능성이 있음을 시사한다. 본 연구의 결과들은 연안해역에 benso[a]pyrene과 같은 지속성 유기오염물질이 유입되었을 때 내정여부에 따라 식물플랑크톤 군집내 종 천이와 일차생산력에 크게 영향을 미칠 수 있음을 시사한다.TEX>5.2개)였으며, 등급별 회수율은 각각 GI(8.5%), GII(13.4%), GIII(43.9%), GIV(34.2%)로 나타났다.ments of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japan

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.35-41
• /
• 2002

This study was conducted to evaluate the effect of initial concentration on pilot-scale composting of diesel-con-laminated soil. Sandy soi] was used in this study. Target contaminant, diesel oil, was spiked. at about 10,000, 25,000, and 50,000 mg TPH/kg of dry roil. Mit ratio of soil to sludge was 1:0.5 as wet weight basis. Removal efficiencies for initial concentrations of 12,966,23,894 and 51,042 mg TPH/kg were 90, 93 and 54％, respectively, during 33 days of composting. Normal alkanes in TPH ranged from 15 to 22％ in initial soils. Volatilization of individual normal alkane in 1,999 mg n-alkanes/kgwas completed within 4 days, while n-alkane compounds of Cl1-Cl4 in 5,270 and 9,836 mg n-alkanes/kg were volatilized continuously during 33 days of composing operation. The first order degradation rate con-stants for 12,966, 23,894, and 51,042 mg TPH/kg were 0.058, 0.076, and 0.022/day, and those for 1,997 5,270, and 9,836 mg n-alkanes/kg were 0.093, 0.100, and 0.019/day, respectively. Considering TPH removal rate, $CO_2$porduction rate, and dehydrogenase activity, the concentration of 51,042 mg TPH/kg inhibited biodegradation of diesel-composting.

• ALGAE
• /
• v.28 no.1
• /
• pp.93-99
• /
• 2013

A freshwater cyanobacterium, Phormidium autumnale KNUA026, was isolated from puddles of icy water in Gyeongsan City, South Korea and its potential as a biofuel feedstock was investigated. Maximal growth was obtained when the culture was incubated at $25^{\circ}C$ and around pH 9.0. The total lipid content of the isolate was approximately 14.0% of dry weight and it was found that strain KNUA026 was able to autotrophically synthesize heptadecane ($C_{17}H_{36}$) which can be directly used as fuel without requiring a transesterification step. As this benthic cyanobacterium was capable of forming thick mats, it could be easily harvested by gravitational settling and this property may reduce the cost of production in commercial applications. Hence, P. autumnale KNUA026 appears to be a promising resource for use in the production of microalgae-based biofuels.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.698-701
• /
• 2011

Over recent several years, researches for the less sensitive gun propellant development have been carried out with promising the product of propellants which have temperature independent characteristics using the new energetic plasticizing mixture as Di-nitro-diaza-alkanes. During this study, the promising propellant formulation having temperature ballistic properties as well as better behaviors concerning the cold brittleness of the materials was confirmed by results in tests of a closed bomb and 40mm Gun firing. On-going research on the optimized shape, formulation and processes of the propellant is progressing. From now on it should be done present study to establish the better composition and processes.