• International Journal of Industrial Entomology and Biomaterials
• /
• 제26권1호
• /
• pp.41-46
• /
• 2013

The cladoceran Daphniamagna has been used as an aquatic test species in aquatic toxicology. To evaluate the aquatic toxicity of leachate from concrete, the immobilization of D. magna was observed after treatment of various concentrations of leachate specimens. Reliabilities of the culture condition and the experimental protocol for acute toxicity test were successfully achieved from the standard toxicity test. The leachates were prepared from the mixture of Ordinary Portland Cement (OPC) and pozzolanic admixtures, Pulverised fuel ash (PFA), Ground granulated blast furnace slag (GGBS) and GGBS containing loess. Acute toxicity test showed 100% immobilization of D. magna for OPC or PFA. The leachates from OPC or PFA had high pH 10 to 12. However, GGBS and GGBS containing loess showed less toxicity according to the concentrations. Especially, immobilization was not observed at the concentrations below 12.5% of GGBS containing loess. Also the range of pH for these specimens was 8 to 9. This suggested that the use of loess as the admixture in concrete may be useful to reduce eco-toxicity of leachates from concrete. This our study provided the harmfulness of the alkali leaching from concrete in aquatic environment and the usefulness of D. magna to evaluate the toxicity of leachates from concrete.

• 한국의류학회지
• /
• 제8권1호
• /
• pp.39-45
• /
• 1984

The effects of Temperature on the removal of triglyceride were studied with soaps having various chain lengths of alkyl group. Cellophane, polyester film and alkali-treated polyester film were soiled with tripalmitin, tagged with 0" and detergency was evaluated by analysing the tripalmitine on the fabric before and after washing by means of liquid scintillation counting. The results were as following: 1) Triglyceride was completely removed from cellophane in distilled water without surfactant at any temperature, because of the hydrophillic nature of cellulose. The detergency of triglyceride from polyester film fully depended on the state of tripalmitin. The detergency of alkali treated polyester film was better than that of untreated polyester film at lower temperature due to increased hydrophillcity, but worse at higher temperature due to the diffusion of molten tripalmitin into the grooves, formed by alkali treatment. 2) The detergency from polyester film was increased with elevating temperature and after reaching some optimum detergencies, the detergencies were rather decreased with increasing temperature. The temperatures of optimum detergency were shifted to higher with increasing chain length of alkyl group. 3) When the soiled film was baked at $60^{\circ}C$ and $70^{\circ}C$ for 20 min, the detergency vs. temperature was much the same as the case of without-baking. These results indicate that the detergency of triglyceride was largely correlated with the suspending power of surfactants at low temperature and with state of soil and hydrophilicity of substrates with elevating temperature.

• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.200-204
• /
• 2017

Molybdenum (Mo), an electrode material of alkali metal thermal-to-electric converters (AMTEC), facilitates grain growth behavior and forms Mo-Na-O compounds at high operating temperatures, resulting in reduced performance and shortened lifetime of the cell. Mo/TiN composite materials have been developed to provide a solution for such issues. Mo is a metal that possesses excellent electrical properties, and TiN is a ceramic compound with high-temperature durability and catalytic activity. In this study, a dip-coating process with an organic solvent-based slurry was used as an optimal coating method to achieve homogeneity and stability of the electrodes. Cell performance was evaluated under various conditions such as the number of coatings, ranging from 1 to 3 times, and heat treatment temperatures of $800-1100^{\circ}C$. The results confirmed that the cell yielded a maximum power of 9.99 W for the sample coated 3 times and heat-treated at $900^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권11호
• /
• pp.1610-1613
• /
• 2003

The aim of the experiment was to study the changes in the activities of various rumen fibre degrading enzymes due to the feeding of chemically treated mustard (Brassica campestris) straw in sheep. Mustard straw (MS) (<5 cm particle size) was treated either with urea (4% (w/w), or with 2% sodium hydroxide (NaOH), or with alkaline hydrogen peroxide (2% NaOH and 1.5% hydrogen peroxide ($H_2O_2$)) and/or supplemented with 2% (w/w) urea. Seven maintenance type rations were prepared using MS (70 parts) with molasses (5 parts) and concentrate (25 parts). They were untreated MS (CMS), urea treated MS (UMS), urea supplemented MS (MSUS), alkali treated MS (AMS), alkali treated and urea supplemented MS (AMS-US), alkali $H_2O_2$ treated MS (AHMS) and alkali $H_2O_2$ treated and urea supplemented MS (AHMS-US). They were then compressed into a complete feed block with the help of block making machine. Forty two male hoggets of Malpura breed sheep were equally distributed into each treatment group and (were) offered feed and water ad libitum. At the end of 21 days of feeding trial, rumen liquor was collected through stomach tube from three animals in each group at 0 h, 4 h, 8 h, 12 h of post feeding. Results showed that the level of enzyme varied from 8.52 to 11.12, 40.85 to 50.37, 3.22 to 3.78, 2.09 to 2.77 and 31.44 to 44.24 units/100 ml SRL respectively for carboxymethyl cellulase (CMCase), $\alpha$-amylase, microcrystalline cellulase (MCCase), filter paper (FP) degrading enzyme and $\alpha$-glucosidase. Processing of MS affected the enzyme activities, in a way, that NaOH and AHP treatment significantly reduced CMCase and FP degrading enzyme. The effect of urea treatment showed an increase in the activity of MCCase and $\alpha$-glucosidase. But the supplementation of urea increased the activity of CMCase, FP degrading enzyme and $\alpha$-glucosidase. The CMCase, $\alpha$-amylase, $\alpha$-glucosidase activities were highest at 4hr whereas MCCase and FP degrading enzyme had maximum activities at 12 h post feeding Results suggested that MS might need longer time in the rumen for its effective degradation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권10호
• /
• pp.1430-1433
• /
• 2004

A study was conducted to determine the effect of different alkali treatments on changes in chemical composition and on degradability of bagasse and rice straw. This study divided into 2 experiments, the first with bagasse and the second with rice straw. Each experiment comprised 9 treatments which included: untreated control; 3% NaOH; 6% NaOH; 3% urea; 6% urea; 3% NaOH/3% urea; 3% NaOH/6% urea; 6% NaOH/3% urea; 6% NaOH/6% urea. In both experiments, crude protein contents were increased from 2.0 to 12.5 units for bagasse and 3.1 to 13.7 units for rice straw by urea treatments. Ash contents of the treated bagasse and rice straw were increased over the untreated control (1.5-9.7 units for bagasse; 4.2-8.8 units for rice straw). The effects on ether extract, crude fiber, neutral detergent fiber and acid detergent fiber of the treated bagasse and rice straw were variable. Nylon bag degradability of dry matter and crude fiber were increased by treatments applying NaOH and NaOH plus urea but not urea alone. In contrast, the egradability of neutral detergent fiber and acid detergent fiber were reduced compared with the untreated control. From these degradability studies, it can be concluded that the most efficient treatments of bagasse were those treatments with 6% NaOH, followed by treatments with 6% NaOH plus 3% or 6% urea and 3% NaOH plus 3% or 6% urea, respectively. However, when comparison was made on the cost of chemical used to treat the agricultural by-products, particularly in case of rice straw, 3-6% urea would be appropriate.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.303-308
• /
• 2010

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl benzoate (5a), 4-nitrophenyl 4-methoxybenzoate (5b), and 4-nitrophenyl 4-hydroxybenzoate (5c) with alkali metal ethoxides, $EtO^-M^+$ ($M^+=Li^+$, $Na^+$ and $K^+$) in anhydrous ethanol (EtOH) at $25.0{\pm}0.1^{\circ}C$. The plots of $k_{obsd}$ vs. [$EtO^-M^+$] exhibit upward curvatures in all cases, indicating that $M^+$ ions catalyze the reactions and ionpaired $EtO^-M^+$ species are more reactive than dissociated $EtO^-$. Second-order rate constants for reactions with dissociated $EtO^-$ and ion-paired $EtO^-M^+$ (i.e., $k_{EtO^-}$ and $k_{EtO^-M^+}$, respectively) have been calculated from ion-pair treatment for the reactions of 5a and 5b. However, such ion-pair treatment has failed to determine $k_{EtO^-}$ and $k_{EtO^-M^+}$ values for the reactions of 5c. It has been concluded that reactions of 5a and 5b are catalyzed by one metal ion, which increases electrophilicity of the reaction center through coordination on the carbonyl oxygen. In contrast, reactions of 5c have been suggested to involve two metal ions, i.e., the one coordinated on the carbonyl oxygen increases the electrophilicity of the reaction center while the other one associated on the phenoxy oxygen decreases the charge repulsion between the anionic reagents (i.e., $EtO^-$ and deprotonated 5c). It has been found that the rate equation derived from the mechanism involving two metal ions fits nicely to the kinetic results obtained for the reactions of 5c.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.111.2-111.2
• /
• 2015

Typical electrodes (metal or indium tin oxide (ITO)), which were used in conventional organic light emitting devices (OLEDs) structure, have transparency and conductivity, but, it is not suitable as the electrode of the flexible OLEDs (f-OLEDs) due to its brittle property. Although Graphene is the most well-known alternative material for conventional electrode because of present electrode properties as well as flexibility, its carrier injection barrier is comparatively high to use as electrode. In this work, we performed plasma treatment on the graphene surface and alkali metal doping in the organic materials to study for its possibility as anode and cathode, respectively. By using Ultraviolet Photoemission Spectroscopy (UPS), we investigated the interfaces of modified graphene. The plasma treatment is generated by various gas types such as O2 and Ar, to increase the work function of the graphene film. Also, for co-deposition of organic film to do alkali metal doping, we used three different organic materials which are BMPYPB (1,3-Bis(3,5-di-pyrid-3-yl-phenyl)benzene), TMPYPB (1,3,5-Tri[(3-pyridyl)-phen-3-yl]benzene), and 3TPYMB (Tris(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane)). They are well known for ETL materials in OLEDs. From these results, we found that graphene work function can be tuned to overcome the weakness of graphene induced carrier injection barrier, when the interface was treated with plasma (alkali metal) through the value of hole (electron) injection barrier is reduced about 1 eV.

• 한국미생물·생명공학회지
• /
• 제5권3호
• /
• pp.127-131
• /
• 1977

억새풀을 알칼리로 전처리한 다음 직접섬유소를 자화할 수 있는 세균을 배양하여 SCP생산의 최적조반을 검토하고 및 가지 결과를 얻었기에 보고하는 바이다. 1) 알칼리성 처열제로써 NaOH가 가장 우수하였으며 87.4% lignin을 제거하였고 이것을 기질로하여 균체를 배양하였을 때 수율이 높았다. 2) NaOH의 농도별로 그 효과를 검토하였을 때 4%의 농도가 가장 적당하였다. 3) 알칼리 처리후 중화시 중화제로서는 H$_3$PO$_4$가 균기수율에 가장 좋았다. 4) 경시적 배양시 균기수율은 60시간에서 가장 좋았고 배양액 1ml당 9.23mg의 건조체를 얻었으며 75.2%의 소화율을 나타내었다.

• Archives of Plastic Surgery
• /
• 제45권2호
• /
• pp.193-195
• /
• 2018

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2011년도 추계학술발표회
• /
• pp.278-279
• /
• 2011