• Journal of Sericultural and Entomological Science
• /
• v.35 no.1
• /
• pp.52-59
• /
• 1993

Raw silk degumming, by which the sericin and other marterials are eliminated from fibroin, is very essential process to produce silk fabrics. Alkali chemicals and enzymes have been used for the silk-degumming process. In this paper, the effect of heat treatment was investigated on silk fibers degummed by two different methods, soap and enzymatic degumming method. The difference between these two degumming methods was analyzed on the basis of results of mechanical testing, thermal analysis and intrated spectroscopy. The tenacity and the elongation of silk fiber are decreased by the heat-treatment in wet state. This tendency is observed in both cases of two degumming methods. The peak temperature in DSC analysis, which is attributed to thermal decomposition of silk fiber, was shifted to higher value with the heat-treatment temperature for the soap degummed silk fiber, however, it was not for the enzymatic degummed one. The IR crystallinity of soap digummed silk fiber is increased with the heat-treatment temperature, while that of enzymatic degummed fiber is not.

• Archives of Metallurgy and Materials
• /
• v.66 no.3
• /
• pp.751-754
• /
• 2021

Rutile-TiO₂ nanorod thin films were formed on Ti disks via alkali treatment in NaOH solutions followed by heat treatment at 700℃. Ag nanoparticles were loaded on nanorods using a photo-reduction method to improve the photocatalytic properties of the prepared specimen. The surface characterization and the photo-electrochemical properties of the Ag-loaded TiO₂ nanorods were investigated using a field-emission scanning electron microscope (FE-SEM), X-ray photoelectron spectroscopy (XPS), UV-Vis spectroscopy and electrochemical impedance spectroscopy (EIS). The TiO₂ nanorods obtained after the heat treatment were 80 to 180 nm thick and 1 ㎛ long. The thickness of the nanorods increased with the NaOH concentration. The UV-Vis spectra exhibit a shift in the absorption edge of the Ag-loaded TiO₂ to the visible light range and further narrowing of the bandgap. The decrease in the size of the capacitive loops in the EIS spectra showed that the Ag loading effectively improved the photocatalytic activity of the TiO₂ nanorods.

• Korean journal of food and cookery science
• /
• v.6 no.4 s.13
• /
• pp.33-39
• /
• 1990

Rice and waxy rice starches were adjusted to 27% of moisture and heated at $100^{\circ}C$ for 16hours, respectively. After the treatment, their gelatinization properties were investigated. The initial gelatinization temperature, obtained by transmittance and amylogram, of Akkibare and Taebaek starches were $60{\sim}65^{\circ}C$ but those of waxy rice and the U.S.A. rice starches were $55{\sim}60^{\circ}C$ and $70{\sim}75^{\circ}C$, respectively. The gelatinization temperatures of heat-moisture treated starches were higher than those of the untreated starches. Viscosities at each temperature and the highest viscosity reduced by some degrees after the treatment. DSC thermograms of all starches showed single endotherm and the gelatinization enthalpies were $2.26{\sim}2.63\;cal/g$. The gelatinization enthalpy tended to decrease after the treatment. Transmittance and viscosity by alkali showed in this order; Akkibare and Taebaek starches>waxy starch>the U.S.A. rice starch. The heat-moisture treated starches increased viscosities in every starch. Transmittance in alkali solution of Akkibare, Taebaek and waxy rice starches decreased. but that of the U.S.A. rice search increased.

• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.183-188
• /
• 1997

Antimicrobial activity of various extracts of Xanthium strumarium L. was tested against 25 strains of bacteria, yeast and fungus. The crude ethylacetate extract exhibited strong growth inhibition to the tested strains with the exception of partial Gram-negative bacteria. The property of antimicrobial compound was very stable under heat treatment at $120^{\circ}C$, but it was unstable in acid (pH 3.0) and alkali (pH 10.0) treatment. The antimicrobial compounds were purified by boiling water extraction, ethylacetate extraction, charcoal column chromatography, silica gel column chro- matography and reverse phase HPLC. The purified compound A and B were detected in a single peak (each above 98% purity) through the HPLC analysis. The compound A and B showed a strong growth inhibition against Gram-negative and positive bacteria in the agar diffusion method. When tested by the FDA method using the esterase, compound A mainly inhibited the growth of bacteria and compound B showed the growth inhibition of both bacteria and yeasts.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.362-370
• /
• 2013

The coconut shell based activated carbon was applied for EDLC (electric double layer capacitor) electrode with the post treatments. The electrochemical properties were evaluated with a coin cell using the activated carbon as electrode. The initial gravimetric and volumetric capacitance of the coconut shell based activated carbon electrode s were 66 F/g and 39 F/cc, and these values decreased to 54 F/g and 32 F/cc after 100 cycles, respectively showing 82% of charge-discharge efficiency. The properties of CV graph with the commercial activated carbon electrodes showed the serious polarization as the result of additional reaction between electrolyte and impurities of the electrode materials. In order to remove impurities efficiently, the commercial activated carbon was treated by alkali and acid solutions consecutively, and then heat treated to control the pore size distribution and the content of surface functional groups. The surface functional groups decreased with the increased heat temperature and the specific capacitance increased with the decreased surface functional groups. The initial capacitance of coconut shell based activated carbon elec trode which was treated with NaOH and HNO3, and then heat treated at $800^{\circ}C$ was 44 F/cc, and the value turned out to be 42 F/cc after 100 cycles, showing over 95% of charge-discharge efficiency.

• Journal of the Korean Ceramic Society
• /
• v.21 no.1
• /
• pp.41-50
• /
• 1984

The ion-exchange porous glasses were prepared by heat treating and subsequently acid treating the (95-y) $SiO_2$.$yB_2O_3$.$5Na_2O+xAl_2O_3$ glasses with y=55, 45, 35, 25. mole% and x=0, 2, 5, 9 mole% It was then investigated how the cation exchange capacity was affected by the phase separation in these glasses. For that matter such quantities as alkali extraction amount pore volume and specific surface area of the glasses were measured. The phase separation in these glasses was in general suppressed by the addition of $Al_2O_3$ maximally around the composition of 5 mole% $Al_2O_3$ This may be because the micro-phase separation prevailed in the glass of that composition over the macro-phase separation increasing thereby the specific surface area as well as the residual amount Al of after acid-treatment and accordingly the cation exchange capacity. The maximum values of the cation exchange capacity was observed to be about 150meq/100g for the glasses of (40-50) $SiO_2$ (55~45)$yB_2O_3$. $5Na_2O+5Al_2O_3$.

• Korean Journal of Materials Research
• /
• v.24 no.6
• /
• pp.285-292
• /
• 2014

Commercial activated-carbon used as the electrode material of an electric double-layer capacitor (EDLC) was posttreated with various acids and alkalis to increase its capacitance. The carbon samples prepared were then heat-treated in order to control the amount of acidic functional groups formed by the acid treatments. Coin-type EDLC cells with two symmetric carbon electrodes were assembled using the prepared carbon materials and an organic electrolyte. The electrochemical performance of the EDLC was measured by galvanostatic charge-discharge, cyclic voltammetry, and electrochemical impedance spectroscopy. Among the various activated carbons, the carbon electrodes (CSsb800) prepared by the treatments of coconutshell-based carbon activated with NaOH and $H_3BO_5$, and then heat treated at $800^{\circ}C$ under a flow of nitrogen gas, showed relatively good electrochemical performance. Although the specific-surface-area of the carbon-electrode material ($1,096m^2/g$) was less than that of pristine activated-carbon ($1,122m^2/g$), the meso-pore volume increased after the combined chemical and heat treatments. The specific capacitance of the EDLC increased from 59.6 to 74.8 F/g (26%) after those post treatments. The equivalent series resistance of EDLC using CSsb800 as electrode was much lower than that of EDLC using pristine activated carbon. Therefore, CSsb800 exhibited superior electrochemical performance at high scan rates due to its low internal resistance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.292-292
• /
• 2007

To apply PDP panel, Soda lime glass(SLG) is cheeper than Non-alkali glass and PD-200 glass but has problems such as low strain temperature and ion diffusion by alkali metal oxide. In this paper suggest the methode that prohibits ion diffusion by deposing barrier layer on SLG. Indium thin oxide(ITO) thin films and barrier layers were prepared on SLG substrate by Rf-magnetron sputtering. These films show a high electrical resistivity and rough uniformity as compared with PD-200 glass due to the alkali ion from the SLG on diffuse to the ITO film by the heat treatment. However these properties can be improved by introducing a barrier layer of $SiO_2\;or\;Al_2O_3$ between ITO film and SLG substrate. The characteristics of films were examined by the 4-point probe, SEM, UV-VIS spectrometer, and X-ray diffraction. GDS analysis confirmed that barrier layer inhibited Na and Ka ion diffusion from SLG. Especially ITO films deposited on the $Al_2O_3$ barrier layer had higher properties than those deposited on the $SiO_2$ barrier layer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.993-999
• /
• 1998

Methanol extract of roots of Amblytropis pauciflora Kitagawa showed the antimicrobial activity to three test strains. Antimicrobial spectra of various extracts of Amblytropis pauciflora Kitagawa were tested against 24 strains of bacteria and fungi. The crude methanol extract inhibited the growth of 12 strains of bacteria and Asp. fumigatus with the exception of yeasts. The properties of the antimicrobial substance were very stable under heat(at 12$0^{\circ}C$), acid(pH 3.0) and alkali(pH 11.0) treatment. Only the root harvested in spring showed the antimicrobial activity. Among the components extracted by butanol, ginseng saponin Rg1 and various saponin-like materials were detected by TLC analysis using a plate of silica gel 60F254. The antimicrobial compound was purified by methanol extraction, activated charcoal column chromatography, Sep-pak(C18) pretreatment and reverse phase HPLC. The purified compound was detected at 13.520 min as a single peak(about 98% purity) through the HPLC analysis.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.33-44
• /
• 2010

In this study, the possibility of utilizing carbide lime waste, obtained from the generation of acetylene process, as a alkali activator of blast furnace slag cement was investigated. The physical and chemical analysis of the carbide lime waste was studied and three types lime waste in order to investigate behaviour as alkali activator were used. Lime wastes were added 0, 10, 20 and 30 wt.% in blast furnace slag and blast furnace slag containing lime waste were added 0, 10, 30 and 50 wt.% in OPC. As a result of analysis of hydration properties, in the case of calcium hydroxide rehydrated after heat treatment at $800^{\circ}C$, it was higher hydration rate than other specimens. For the results of compressive strength test, when lime waste passed 325 mesh sieve and rehydrated calcium hydroxide were used, it was higher compressive strength than OPC from hydration 7days. At OPC50 wt.%-BFS45 wt.%-AA5 wt.% system using lime waste of 325 mesh under, the highest compressive strength appeared.