• Title/Summary/Keyword: Alignment Measurement

Search Result 338, Processing Time 0.028 seconds

Measurement of Friction Angle of Sand from Horizontal Stress and Torque Acting on Vane (베인에 작용하는 수평응력과 토크를 이용한 모래의 마찰각 측정)

  • Park, Sung-Sik;Kim, Dong-Rak;Lee, Sae-Byeok
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.38 no.1
    • /
    • pp.63-71
    • /
    • 2018
  • In this study, the torque and horizontal stress acting on vane were measured and then used to determine a friction angle of sand. A dry Nakdong River sand was prepared for loose and dense conditions in a cell and then pressurized with 25, 50, 75 or 100 kPa from the surface of sand. A vane (5cm in diameter and 10cm in height) was rotated and the torque and horizontal stress were measured at real time. A maximum torque was 3.5-9.5Nm for loose sand and 7.4-17.6Nm for dense sand, respectively. The maximum torque increased as an overburden pressure increased. The maximum torque obtained at 14-20 degrees of vane rotation, which was not influenced by the initial alignment of earth pressure and vane blade. An initial horizontal stress ratio was 0.33-0.35 on the average. The horizontal stress increased initially and then decreased due to particle disturbance. A friction angle was calculated from real time varying horizontal stress and torque, which decreased with increasing overburden pressure. The friction angle of loose sand from vane shear test was similar to that of direct shear test but that of dense sand was overestimated.

Characteristics of Track Irregularities on Kyoungbu High-speed Line (경부고속선 궤도틀림 분포특성)

  • Choi, Il-Yoon;Lee, Jun S.;Um, Ju-Hwan;Kang, Tae-Ku;Choi, Min-Ji
    • Journal of the Korean Society for Railway
    • /
    • v.18 no.1
    • /
    • pp.63-70
    • /
    • 2015
  • Track irregularities have a strong influence on the safety and the ride comfort of trains as well as track maintenance work. A statistical analysis was conducted for track irregularities data measured in Kyoungbu high speed line using a track recording car(EM120). First, the characteristics of EM120, which adopted versine measurement system, were investigated and the transfer function of EM120 was examined. The distributions of the surface and the alignment which have short wavelength were considerably high and the distribution decreased as wavelength increases. A distribution analysis of the wavelength was carried out according to EN standards and most of the track irregularities were in a D1 wavelength range. The distributions of the amplitude of track irregularities were also investigated and the results show that the distributions of track irregularities decrease rapidly as amplitude increases. These results may be helpful in making track maintenance plans and revising track irregularities criteria.

Radiographic Study of Cobey Method and Modified Cobey Method (Cobey 검사법과 Modified Cobey 검사법에 대한 방사선학적 연구)

  • Go, Yu-Rim;Joo, Young-Cheol;Lee, Seung-Keun
    • Journal of radiological science and technology
    • /
    • v.42 no.3
    • /
    • pp.167-173
    • /
    • 2019
  • The Cobey method and the modified Cobey method are most commonly used in clinical practice. Therefore, the purpose of this study was to investigate the radiological differences between Cobey and modified Cobey and provide radiographic information about changes of hindfoot image with X-ray entrance center and tube angle change in modified Cobey. This study was performed on foot and ankle phantom. First, for image comparison of Cobey and modified Cobey, the images obtained by applying the same X-ray entrance center to the ankle joint were compared and analyzed. Second, in the modified Cobey, the X-ray entrance center is set as ankle joint and lateral malleolus. The X-ray tube angle was varied from $10^{\circ}$ to $40^{\circ}$ at $5^{\circ}$ intervals for each X-ray entrance center. The images obtained by varying the X-ray tube angle from $10^{\circ}$ to $40^{\circ}$ at intervals of $5^{\circ}$ for each X-ray entrance center were compared and analyzed. The irradiation conditions were the same with 110 kVp, 200 mA, 10 ms, and 110 cm of source - image receptor distance (SID). Image evaluation was performed by two radiologists. Measurements were made on the lateral point, middle point, and calcaneus width based on a hypothetical line parallel to the calcaneal tuberosity. Data were analyzed by using descriptive statistics as the mean of the distance to each measurement location. The modified Cobey was longer than the Cobey by an average of 3 to 4 mm lateral and medial points, and the calcaneus width was similar (ICC = 0.939). In modified Cobey method, when the X-ray entrance center is ankle joint, the lateral point is about 3 mm and the medial point is about 4.3 mm longer than lateral malleolus. Also, when the X-ray tube angle is more than $20^{\circ}$, the degree of distortion is large. The ICCs for the lateral, medial point, and calcaneus width were 0.998, 0.961, and 0.997, respectively, as the X-ray entrance center and tube angle were changed. There was no significant difference between Modified Cobey and Cobey. Modified Cobey showed no need to compensate the $20^{\circ}$ detector angle of the Cobey. In addition, we suggest that tube angle should be limited within $20^{\circ}$ when modified Cobey is performed.

Reactive and Proactive Aggression, the Validation of the Reactive-Proactive Questionnaire (RPQ): Focusing on ESEM and Rasch (반응적 공격성과 주도적 공격성, Reactive-Proactive Questionnaire(RPQ) 타당화 연구: ESEM과 Rasch를 중심으로)

  • Seonyoung Park;Jonghan Sea
    • Korean Journal of Culture and Social Issue
    • /
    • v.30 no.2
    • /
    • pp.159-192
    • /
    • 2024
  • The purpose of this study is to validate the Reactive-Proactive Aggression Questionnaire (RPQ), a tool for measuring reactive-proactive aggression, in the context of South Korea. A thorough translation was conducted in collaboration with the original author. An exploratory factor analysis (EFA), exploratory structural equation modeling (ESEM), rating scale model (Rasch), differential item functioning (DIF), and convergent validity were performed on a sample of 510 South Korean individuals. The results revealed a two-factor structure of reactive and proactive aggression after removing one item showing dual loading. Rating scale analysis based on the Rasch model indicated the appropriateness of the 3-point Likert scale, with all items meeting fit criteria. Although the separation index and separation reliability of proactive aggression was marginally lower, the overall discrimination between participants and items was satisfactory. Examination of participant-item distribution indicated a suitable alignment between reactive aggression and participant ability levels, whereas proactive aggression exhibited slightly elevated item difficulty. Furthermore, three items were found to function differently based on gender. A moderate but statistically significant positive correlation was found between the Barratt Impulsiveness Scale-11-R (Korean version) and RPQ from the results of the convergent validity evaluation. Overall, this study employed rigorous statistical methods to validate the suitability of the RPQ for use in Korea, taking cultural nuances into account, and introduced the concepts of reactive and proactive aggression to the Korean general population.

STUDY ON THE KOREAN CRANIOFACIAL SKELETAL PATTERN BY COUNTERPART ANALYSIS (구조적 대응체 분석법(Counterpart Analysis)에 의한 한국인의 악안면 두개 골격형태에 관한 연구)

  • Sohn, Byung-Wha;Lee, Yoon-Jeong;Yang, Choon-Sik
    • The korean journal of orthodontics
    • /
    • v.30 no.5 s.82
    • /
    • pp.509-519
    • /
    • 2000
  • Enlow's counterpart analysis explains the complex with anatomic and developmental characteristics where craniofacial aspect of individuals has been developed. The analysis does not compare individual measurement with the normal value from the average of majority but analyzes by comparison of values that each individual has. This study was to clarify the Korean craniofacial skeletal pattern using Enlow's counterpart analysis considering the fact that the craniofacial skeletal pattern has racial and regional variations. This research will be helpful in the future for growth research and research of the orthognathic surgery. For this study, the samples were consisted of 100 Korean adult subjects(50 males and 50 females) who had normal occlusion and pleasing face. Measurement points and lines were established using Enlow's counterpart analysis and they were statistically evaluated. The results indicated that : 1. The average angle between PCF and PMV was $38.54^{\circ}$ in males and $38.43^{\circ}$ in females, and the average Wits' appraisal was -2.51 in males and -2.3 in females. The ramus alignment(R4) was 1.89 in males and 2.36 in females. 2. It shows that females have a longer ramus than the PCF compared to the males, because there was a significant difference in Ramus/PCF horizontal dimensions (Skeletal A3-B3) between female and male subjects 3. It shows that males have a longer mandibular corpus than the maxilla compared to the females, because there was a significant difference in Maxillary/Mandibular arches(Skeletal A4-B4) between male and female subjects 4. In cranial floor+maxilla/ramus+corpus at A and B points(Al-Bl), which represents difference in total horizontal length between the maxilla and mandible, there was no significant difference between males and females. In conclusions, compared to Caucasian, Korean have more depressed midface, prognathic mandible, and ramus that rotates inferioposterior. Also, we observe that Korean women have target ramus posterior cranial base, as compared with Korean men. Consequently, the total length of maxilla and mandible does not show any difference, because man's mandible is longer than maxilla in comparison with woman's one.

  • PDF

Dose Distribution and Characterization for Radiation Fields of Multileaf Collimateor System (방사선 입체조형치료용 다엽콜리메이터의 특성과 조직내 선량분포 측정)

  • Chu, Sung-Sil;Kim, Gwi-Eon
    • Radiation Oncology Journal
    • /
    • v.14 no.1
    • /
    • pp.77-85
    • /
    • 1996
  • Purpose : Multileaf collimator(MLC) is very suitable tool for conformal radio-therapy and commissioning measurements for a multileaf collimator installed on a dual energy accelerator with 6 and 10MV photons are required, For modeling the collimator with treament planning software, detailed dosimetric characterization of the multileaf collimator including the penumbra width, leaf transmission between leaf leakage and localization of the leaf ends and sides is an essential requirement. materials and Methods : Measurement of characteristic data of the MLC with 26 pair block leaves installed on CLINAC 2100C linear accelerator was performed. Low sensitive radiographic film(X-omatV) was used for the penumbra measurement and separate experiments using radiographic film and thermoluminescent dosimeters were performed to verify the dose distribution, Measured films were analized with a photodensitometer of WP700i scanner. Results : For 6 & 10 MV x-ray energies, approximately $2.0\%$ of photons incident on the multileaf collimator were transmitted and an additional $0.5\%$ leakage occurs between the leaves. Localizing the physical end of the leaves showed less than 1mm deviation from the $50\%$ decrement line and this difference is attributed to the curved shaped end on the leaves One side of a sin히e leaf corresponded to the $50\%$ decrement line, but the opposite face was aligned with a lower value. This difference is due to the tongue and groove used to decrease between leaf leakage. Alignment of the leaves to form a straight edge resulted larger penumbra at far position from isocenter as compare with divergent alloy blocks. When the MLC edge is stepped by sloping field, the isodose lines follow the leaf pattern and Produce scalloping isodose curves in tissue. The effective penumbra by 45 degree stepped MLC is about 10mm at 10cm depth for 6MV x-ray. The difference of effective penumbra in deep tissue between MLC and divergent alloy blocks is small (5mm). Conclusion : Using the characteristic data of MLC, the MLC has the clinlical acceptability and suitability for 3-D conformal radiotherapy except small field size.

  • PDF

A STUDY OF DENTAL CROWDING AND ITS RELATIONSHIP TO MANDIBULAR INCISOR SHAPE BY MODEL ANALYSIS IN ADOLESCENTS (청소년 석고 모형 분석에 의한 하악절치 형태와 치아밀집의 상관관계에 관한 연구)

  • Surh, Jeong-Eun;Baik, Hyoung-Seon
    • The korean journal of orthodontics
    • /
    • v.25 no.5 s.52
    • /
    • pp.593-604
    • /
    • 1995
  • Mandibular incisor crowding is one of the most common features of malocclusion and is interesting characteristic in view of relapse and stability after orthodontic treatment. There are many potential factors in the etiology of lower anterior crowding. The tooth size variation is one of them, but biologic significance for the faciolingual width of the teeth has been overlooked. Peck and Peck reported that persons with ideal mandibular incisor alignment were shown to have incisor with smaller mesiodistal and larger faciolingual dimensions than persons with incisor crowding. On the basis of these findings they suggested MD/FL index as a clinical guideline for the assessment for lower incisor crowding. The present study was undertaken to examine the relationship between mandibular incisor crowding and mandibular incisor dimension, and determine their correlation with arch length discrepancy. 154 dental casts of people from 11 to 17 years of age were made, and were divided into normal group with irregularity index less than of 1, and crowding group with irregularity index greater than 1.The casts were measured and analyzed statistically. The results were as follows. 1. The mean mesiodistal width for mandibular incisor was larger in crowding group, and has significant difference in central inciosr measurement. There are no significant differences in the faciolingul width and MD/FL index. 2. Irregularity index has significant correlation coefficients with mesiodistal width and MD/FL index for mandibular incisor in crowding group, but no correlation with faciolingual width. It also has correlation with maxillary and mandibular arch length discrepancy, total tooth material, mandibular intercanine width, and mandibular inter first premolar width. 3. Upper and lower arch length discrepancy have significant correlation with mesiodistal width of mandibular incisor and overbite, but have no correlation with faciolingual width. Lower arch lenth discrepancy has significant correlation with MD/FL index for mandibular incisor and upper arch length discrepancy has correlation with MD/FL index for mandibular lateral incisor. 4. Significant differences were observed between normal and crowding group for the mandibular arch length discrepancy and overbite.

  • PDF

Application of geophysical exploration methods for safety diagnosis of the basement of stone pagoda (지구물리탐사 방법의 석탑지반 안전진단에의 적용)

  • Suh, Man-Cheol;Oh, Jin-Yong;Kim, Ki-Hyun
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2004.08a
    • /
    • pp.70-83
    • /
    • 2004
  • The safety diagnosis of cultural assets is Primarily focused on its non-destructiveness. Research on the nondestructive diagnosis and conservation of masonry cultural heritage is the key which is considered by technologic kernel. Geophyscial Prospecting as nondestructive diagnostic technology plays an important role in the characterization of the foundation of stone pagodas. It is natural that understanding of shallow subsurface condition beneath them is essential for their structural safety diagnosis. As an example, the nondestructive geophysical methods were applied to two three-story stone pagodas, Seokgatap (height 10.8 m, width 4.4 m, weight 82.3 ton) and Dabotap (height 10.4 m, width 7.4 m, weight 123.2 ton) which were built in 791 at Bulkuksa temple. An earlier archaeological investigation shows that stone pagodas have experienced severe weathering process and are slightly leaning, which will threaten their stability At the base part of Dabotap, an offset of the stone alignment is also observed. Direct measurements of ultrasonic velocities was introduced for the mechanical properties of the stone The velocity ranges of ultrasonic waves for Dabotap and Seokgatap are 1217${\~}$4403 m/s and 584${\~}$5845 m/s, respectively, and the estimated averages of the uniaxial compressive strength are 463 kg/$cm^2$ and 409 kg/$cm^2$, respectively. Site characteristics, around the pagodas are determined by the measurement of multiple properties such as seismic velocity, resistivity, image of ground-penetrating radar, On the basis of the higher velocity structure, the site of Seokgatap appears to have solider stability than the Seokgatap site. Near the pagodas, higher(up to 2200 $\Omega$m) resistivity is present whereas their outskirts have as low as 200 $\Omega$m. By the combined results of each geophyscial methods, the subsurface boundaries of two stone pagodas are revealed. The Dabotap site is in the form of an octagon having 6-m-long side with the depth of ${\~}$4 m, whereas the Seokgatap site is the 8 ${\times}$ 10 m rectangle with the depth of 3 m. These subsurface structures appear to reflect the original foundations constructed against the stone load of ${\~}8 ton/m^2$. At the subsurface beneath the northeast of each pagoda, low seismic velocity as well as low resistivity is prominent. It is interpreted to represent the weak underground condition which Is the possible cause of the slightly leaning pagodas toward the NNW.

  • PDF