• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.157-164
• /
• 2000

It is known that residual aligning torque of tires causes vehicle pull. There is, however, only a little literature available which shows how the residual aligning torque of tires causes vehicle pull. In this paper, a vehicle model in two degrees of freedom was adopted for the analysis of a vehicle under the straight-ahead motion. The analysis with this vehicle model clearly shows the effect of residual aligning torque of tires on vehicle pull. In order to show the validity of the analysis, a vehicle commercially available was selected. This vehicle was modeled in 137 degrees of freedom system with multibody dynamics software. Vehicle pull simulation results show that vehicle model drifts in lateral direction due to the residual aligning torque of tires. Vehicle test results with the car were also included.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.151-162
• /
• 1998

During a straight driving and cornering maneuver by a vehicle various forces and moments are exerted on the tire's footprint. A cornering properties, handling and stability performances of vehicle can be predicted by these forces and moments values. Therefore, on this study, a lateral force and a aligning torque are predicted by these forces and moments values. Therefore, on this study, a lateral force and a aligning torque are predicted using a finite element method. Contact area of the tire between bead and wheel are fixed to simplify of a finite element model. Lateral force is exerted on the rigid surface as a real load with Coulum friction after inflate and load vertically. Then, rotate the tire's axle to simulate a free rolling untill taken the equilibrium of a aligning torque. Also, experimental observations are made to test a reliability of a FE analysis conducted in this study. The finite element analysis said that good agreement was obtained with experimental results of these cornering properties, giving confidence within about one percent. So it os recommended that a finite element analysis can be used as a good tool to predicted the tire cornering properties.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.173-180
• /
• 2004

The tread pattern of a tire has an important effect on tire performances such as handling, wear, noise, hydroplaning and so on. However, a finite element analysis of a patterned tire with detailed tread blocks has been limited owing to the complexity of making meshes for tread blocks and the huge computation time. The computation time has been shortened due to the advance in the computer technology. The modeling of tread blocks usually requires creating a solid model using a CAD software. Therefore it is a very complicated and time-consuming job to generate meshes of a patterned tire using a CAD model. A new efficient and convenient method for generating meshes of a patterned tire has been developed. In this method, 3-D meshes of tread pattern are created by mapping 2-D meshes of tread geometry onto 3-D tread surfaces and extruding them through tread depth. Then, the tread pattern meshes are assembled with the tire body meshes by the tie contact constraint. Residual aligning torque and frictional energy are calculated by using a patterned tire model and compared to the experimental results. It is shown that the calculated results of a patterned tire model are in a good agreement with the experimental ones.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.15-21
• /
• 2008

It is generally known that the PRAT(Plysteer Residual Aligning Torque) is one of indicating a performance factors of a tire for assessing the vehicle pull, also tire pattern shape, which means lateral groove angle, is very important tire design factor in relation to the PRAT. Lateral grooves of tire pattern are widely divided into center and shoulder parts. So, this paper has studied the correlation between the PRAT and their lateral groove angles using FEM. Especially, the steady state rolling analysis among tire rolling analysis methods has been used for the PRAT performance study. Firstly, analysis result data have been compared with the experimental data to validate FE analysis for PRAT. Next, the PRAT due to the lateral groove angle about PCR(Passenger Car Radial) tire and SUV tire has been analyzed. The tendency of the PRAT due to the lateral groove angles can be used as a guide line for the tire design in relation to vehicle pull.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1371-1375
• /
• 2005

The paper has analyzed the influence of tire design variable on the tire Force and Moment (F&M) characteristics, especially by the belt angle, the Plysteer Residual Aligning Torque (PRAT) which is considered as one of the causing factors for the vehicle pull. To validate the tire FE model, the tire stiffness and the PRAT which can be derived from the simulation data have been compared with the experimental data of test machine. In addition to PRAT characteristic, the tire stiffness and cornering characteristics due to the belt angle have been investigated. The effects of drum's curvature on the PRAT have been also investigated using the tire FE model and the usefulness of the current drum type F&M test machine can be confirmed.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.104-112
• /
• 2006

The influence of tire belt angle on the Plysteer Residual Aligning Torque(PRAT) and the cornering stiffness by the FEM has been studied. The PRAT is a performance factor of the tire about vehicle pull, and the cornering stiffness has relation to vehicle steering response of outdoor test. To validate FE model for analysis, simulation data for both the static stiffness(vertical, lateral) and the PRAT have been compared with the experimental data. In addition to the characteristics of the PRAT and the cornering stiffness due to the tire belt angle, rolling and cornering contact characteristics have been studied. The tendency of the PRAT and the cornering stiffness due to the belt angle can be used as a guide line for the tire design in relation to vehicle pull and vehicle steering response.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.216-216
• /
• 2000

In this paper, we introduce a new roadway-departure prevention algorithm and the developed Hardware-in-the-Loop-Simulator (HiLS) for applying the new algorithm. A sliding-mode controller is used for lateral position control. And, the HiLS consists of real car elements, a micro-control board, and a self-aligning torque generator Finally from the display module, the perspective view and bird view of the animated vehicle can be seen simultaneously.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1261-1267
• /
• 2003

The Steering system is the most important system for a vehicle, in terms of safety and driving feel. But in many cases, experiments to improve the steering feel using a real vehicle are very difficult in the aspects of repeatability, safety and money. Repeatability in testing steering systems is very important because the steering feel for a driver varies according to the environmental conditions. In addition to that, steering tests using vehicle are so dangerous that the driver might not concentrate on the tests. In this paper, a new steering system simulator using the front part of a steering and suspension system is described. This simulator allows cheap, safe, and repeatable testing of the steering system compared with the real vehicle test.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.923-929
• /
• 2001

Steering system is most important for vehicle in safety and driving feel. However, testing using real car to improve steering feel is often difficult in aspect to repeatability, safety and money. Repeatability in testing steering system is very important because steering feel for driver is variable according to the environment condition. And steering testing of vehicle is so dangerous that driver may not concentrate in testing. In this paper, the steering system simulator using front part of steering and suspension system was developed. We can test the electric power steering system for the light weight vehicle using this simulator cheap, safely and repeatably.

• 대한교통학회지
• /
• 제32권5호
• /
• pp.503-512
• /
• 2014

본 논문에서는 펑크 타이어 힘 시험 연구 결과들을 다양하게 수집하고 분석하여, 펑크(blow-out) 타이어 차량 동적 거동 해석을 위한 구름저항력(rolling resistance), 셀프 얼라이닝 토크(self aligning torque), 코너링 강성(cornering stiffness), 반경방향 강성(radial stiffness)과 같은 관련 계수들의 적정값을 추정하였다. 이러한 타이어 펑크 관련한 입력계수들을 자동차 사고 해석 상용 프로그램에서 설정하여 타이어 펑크 효과를 구현한 시뮬레이션 해석을 수행하였다. 그리고, 정상 차량들 간의 다양한 충돌 형태들과 속도 등을 참조하여, 펑크 차량의 충돌 유형들을 구성하고 시뮬레이션 해석을 수행하여 충돌 특성을 구하였다. 본 연구에서 제시하는 타이어 펑크 혹은 손상에 대한 고려는 보다 신뢰성 있는 자동차 사고 재구성에 기여할 수 있을 것이다.