• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.927-933
• /
• 2022

We synthesized (C₁₀H₈N₂H)₂Cr₂O₇, The structure of the product was characterized with FT-IR(infrared) and elemental analysis. The oxidation of benzyl alcohol by (C₁₀H₈N₂H)₂Cr₂O₇ in organic solvents showed that the reactivity increased with the increase of the dielectric constant. The oxidation of alcohols was examined by (C₁₀H₈N₂H)₂Cr₂O₇ in DMF, acetone. As a resuit, (C₁₀H₈N₂H)₂Cr₂O₇ was found as efficicent oxidizing agent that converted benzyl alcohol, allyl alcohol, primary alcohol and secondary alcohols to the corresponding aldehydes or ketones(65%~95%). The selective oxidation of alcohols was also examined by (C₁₀H₈N₂H)₂Cr₂O₇ in DMF, acetone. (C₁₀H₈N₂H)₂Cr₂O₇ was selective oxidizing agent(15%~95%) of benzyl alcohol, allyl alcohol and primary alcohol in the presence of secondary ones. In the presence of DMF solvent with acidic catalyst such as H₂SO₄. (C₁₀H₈N₂H)₂Cr₂O₇ oxidized benzyl alcohol(H) and its derivatives. The Hammett reaction constant(ρ) was -0.69(308K). The observed experimental data were used to rationalize the hydride ion transfer in the rate determining step.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.482-490
• /
• 1992

2,5-dimethoxy-2,5-dihydrofurfuryl alcohol was electrosynthesized from furfuryl alcohol in methanol solution by using three kinds of metal oxide anode. The electrods were prepared by the following process : Thin layer of semiconducting material such as tin(IV)oxide and antimony(III)oxide was made on the titanium base metal in an electric furnace. The titanium metal block with the layer was coated with ${\alpha}-PbO_2$, ${\beta}-PbO_2$, and $MnO_2$ in each electrolytes by anodic deposition, respectively. The lead dioxide electrodes showed better anti-corrosive property than the manganase dioxide electrode. The yield of the product was 92% which is almost the same as the one with conventional platinum electrodes.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.197-205
• /
• 1970

Inositols are cyclohexanehexol and they have been known to be nine stereomers. Scyllo-inositol, epi-inositol and muco-inositol could be synthesized from myo-inositol. Scyllo-inositol and epi-inositol were obtained by oxidation and reduction process from myo-inositol. Myo-inositol and epi-inositol were oxidized by treatment, in solution, with dilute hydrogen peroxide. In all cases, only axial hydroxyl groups were oxidized and monoketons were obtained. Reduction of myo-inosose-2 with sodium boron hydride was carried out in $pH2{\sim}3.$ The reduction products were equatorial alcohol but: reduction of DL-epi-inosose-2 by catalytic reduction produced axial alcohol obtained. Inositol could be esterified. Hexa-O-(p-hydroxy benzoyl)-esters of myo-inositol, scyllo-inositol, epi-inositol and muco-inositol were synthesized and their antimicrobial action on microbes were tested for application to food industry. As the results, it was found that the activities of muco-inositol ester was more vigorous than others.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.1
• /
• pp.45-48
• /
• 2006

Alcohol dehydrogenase (ADH) and Aldehyde dehydroganase (ALDH) activities of turnip extracts with ultrasonification at $60,\;100^{\circ}C$ temperature were investigated. Ultrasonification extracts showed a increase as compared with the normal extracts. ALDH activities were high than ADH activities. So, turnip extracts was shown efficient plants in alcohol oxidation. Appraisers liked powder extracts better than liquid extracts in sensory score.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.141-147
• /
• 2003

Oxidized polyethylene wax is obtained by oxidation of polyethylene wax and it is composed of various chemicals, e.g., fatty acid, alcohol, ketone and ester. The application of oxidized polyethylene wax is determined by the composition of these chemical substances. In this basic study we observed the basic reaction parameters of time, temperature, oxygen concentration and catalysts on the oxidation reaction of low molecular weight polyethylene(PE wax) by analyzing the acid value, physical and chemical properties of oxidized PE wax to develop a new oxidation process. Acid values are increased with temperature increase in the rage of $150^{\circ}C^{\sim}180^{\circ}C$ but decreased beyond 190$^{\circ}C$. Acid values are also increased with oxygen concentration. As the oxidation reaction proceeds the molecular weight and softening points of oxidation products are decreased by cracking reaction, but the viscosities are increased. To observe the crystallinity of oxidation products SEM experiment was performed. To obtain a high acid-value product in a mild condition, we adopted free radical catalysts and the acid value of the product using catalyst was higher than the product obtained without catalyst in the same reaction condition. The effective initiators were dicumyl peroxide(DCPO), t-butylperoxy-2-ethyl hexanoate(HOPO) and benzoyl peroxide(BPO) having long half-life.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.30-35
• /
• 2008

In this study, the feasibility of soil washing, chemical oxidation and sonication was investigated to treat lubricantcontaminated railroad soil. Tergitol, a non-ionic surfactant, was used as a washing agent with or without iso-propyl acohol as a cosolvent. However, it was not effective to remove lubricant from soil even though tergitol was the most effective washing agent for diesel-contaminated soil. The cosolvent reduced the overall washing efficiency. Chemical oxidation removed 30% of lubricant from contaminated soil. Soil washing after chemical oxidation extracted additionally 16-17% of lubricant. Sonication enhanced-soil washing showed enhanced overall efficiency of soil washing. Lubricant-contaminated soil should be remediated by the other technology used for diesel-contaminated soil.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.2
• /
• pp.65-69
• /
• 2001

The potential change, and the crossover of alcohol in a liquid-feed solid polymer electrolyte fuel cell operating at atmosphere and room temperature was investigated. Alcohol crossover was generated from all the alcohol by using the fuel. The single-cell property of direct methanol fuel cell was higher than that of other alcohol species as $31mW/cm^2$ at 0.23 V at 4.5M of methanol.

• Korean Journal of Plant Resources
• /
• v.36 no.3
• /
• pp.198-206
• /
• 2023

The effectiveness of the extracts of Alnus japonica and Portulaca oleracea, which are effective in improving alcohol-induced liver damage, was confirmed using acute and chronic alcoholic liver injury animal models. In the acute alcoholic liver injury model, dieting Alnus japonica and Portulaca oleracea complex (ALPOC) at a dose of 50 mg/kg showed no significant change in liver or body weight, while measured plasma ALT activity to be deficient (28.12 U/ml) compared to the alcohol intake group (42.5 U/ml), and confirmed that restored it to an average level. It showed an improvement of 34.9% compared to the alcohol intake group. AST activity confirmed that it showed a very effective liver protection activity by showing a gain of 12.6%. The chronic alcoholic liver damage animal model demonstrated that ALT showed an improvement effect of 25%, and AST showed an effect similar to that of the positive control group, Hovenia extract. In addition, through H&E staining analysis, observed that the ALPOC improved the necrosis and bleeding of the liver. And the ALPOC group showed intense antioxidant activity of 127% or more compared to the alcohol intake group, and this was confirmed to have a very high activity, which is more than 20% higher than that of the hovenia fruit extract.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.51-58
• /
• 2020

In this study, the thermal oxidation of raw natural rubber (NR) was investigated under controlled conditions by optical image and fourier transform infrared (FT-IR) analysis. The thermal oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at 80℃ under low humidity conditions to completely exclude moisture and restrict light oxidation. Images of the thin film of raw NR were obtained before and after thermal oxidation. FT-IR absorption spectra were measured in the transmission mode at different thermal exposure times. The thermal oxidation of NR was examined by the changes in the absorption peaks at 3449, 1736, 1447, 1377, 1242, 1072, and 833 cm^-1, which corresponded to a hydroxyl group (-OH), a carbonyl group (-C=O) from an aldehyde and a ketone, a methylene group (-CH₂-), a methyl group (-CH₃), a carbon-oxygen single bond (-C-O) from an epoxide, a carbon-oxygen bond (-C-O) from an ether, an alcohol, a peroxide, or a cyclic peroxide, and a cis-methine group (cis-CCH₃=CH-), respectively. In the initial stage of thermal oxidation, two different types of free radicals were produced quickly and randomly by the homolytic cleavage of a double bond and allylic hydrogen abstraction. Aldehydes and ketones were formed from chain scissions of the double bonds and alcohols were produced from allylic hydrogen abstraction at the methylene or methyl groups. Two reactions seemed to proceed competitively with each other. At a later stage, oxidative crosslinks seemed to dominate through the combination of free radicals such as an allyl radical (CH=CHCH₂·), alkoxy radical (RO·), and peroxy radical (ROO·) and the reaction of a hydroperoxide (-ROOH) with a double bond. The image obtained after thermal oxidation showed hardening without cracks. Based on these observations, a plausible two-step mechanism was suggested for chain hardening caused by the thermal oxidation.

• Journal of the Korean Society of Safety
• /
• v.1 no.1
• /
• pp.21-26
• /
• 1986

Gas sensing materials for detecting inflammable gas such as alcohol, propane, acetic acid, carbon monoxide, hydrogen were developed by utiliting $MgO-Cr_2O_3-TiO_2$ system. Between 30$0^{\circ}C$ and 50$0^{\circ}C$, reversible chemisorption becomes dominant and the electrical canduction of P-type semiconductive with the gas chemisorption. The ceramic sensor exhibits a high sensitivity to particular reducing gas such as alcohol, whereas propane and butane have little effect on the resistivity. The time response of adsorption is estimated to be about 20 sec. On the other hand, the desorption process, which corresponds to oxidation due to oxygen adsorption, take more than 60 sec. Thus the ceramic sensor can be used as a alcohol sensor in an ambient aunosphere. As the oxygen concentration is increased from 0.1 to 10 precent($10^3-10^6ppm$), the resistance decreases rapidly but stabilizes at higher concentration.