• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.387-390
• /
• 2004

Thick film alcohol gas sensors were fabricated. Their electrical properties and gas sensing characteristics were investigated. The sensitivity of $1wt.\%$ Pd-doped ${\gamma}-Fe_2O_3$ thick film heat treated at $400^{\circ}C$, 2hrs was $74\%$ to 500ppm alcohol gas at the operating temperature of $250^{\circ}C$. The selectivity of the film to alcohol was good. It showed fast response time to low concentrations of alcohol in air, hence this sensor can be used as a breath sensor.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.783-788
• /
• 2008

We suggest a CNT-based gas sensor for breath alcohol measurement. The sensor was composed of single-walled carbon nanotubes (SWCNTs) thin film on flexible PES (polyethersulfone) substrate, and the SWCNTs thin film was formed by multiple spray-coating with SWCNTs solution which was well-dispersed, highly controlled and functionalized in ethanol solvent. In this work, three types of SWCNTs thin films were deposited with changes in the number of spray-coatings to 20, 40 and 60 times in order to compare electrical response properties of the SWCNTs thin films. from the fabricated sensors, conductance and capacitance responses were measured and discussed. Alcohol gas sensors have been commercialized widely as gauge for breath alcohol measurement which is applicable to checking whether car drivers are drinking-driving or not. Our alcohol gas sensors showed good sensitivity and linearity even at room temperature.

• 정보학연구
• /
• 제8권1호
• /
• pp.57-61
• /
• 2005

In this study, polyvinyl alcohol film of japan and china products were measured by FT-IR spectrophotometer, ASTM D882-02(tensile strength) and KS M3048-2001 test method(Thermal Gravitational Analysis). The Chinese product became help in prime cost curtailment. It was confirmed as the result polyvinyl alcohol film which analyzes the Chinese product and the Japanese product. And the result stability which tries to measure the stability against heat was superior.

• 한국염색가공학회지
• /
• 제16권3호
• /
• pp.14-21
• /
• 2004

In this research, we accomplished in order to improving color fastness of sublimation for Poly (vinyl alcohol) (PVA)-iodine polarized film. The poor iodine sublimation problem has greatly improved by $O_2$ low temperature plasma treatment. We obtained the followings: (1) plasma treatment has contributed in adhesive ability via peel strength, AFM image and roughness were investigated, But the improvement in adhesive strength was not linearly proportional to the treatment time. (2) $O_2$ plasma treated PVA-iodine polarized film was good enough as to maintain the transmittance and polarization even after iodine cone. of 0.05mol/L and dipping time of 50sec. (3) $O_2$ low temperature plasma treated PVA-iodine polarized film has obtain high durability because of good adhesive strength.

• 공업화학
• /
• 제10권4호
• /
• pp.603-607
• /
• 1999

Potassium iodide(KI)를 함유하는 poly(vinyl alcohol)(PVA) 필름의 산화공정에 의해 제조된 PVA-iodine 착제물(PVA_KI계)의 편광특성을 조사하였다. PVA-KI계 편광필름의 UV-visible 스펙트럼은 220 nm, 290~360 nm와 650 nm에서 $I^{-}$, $I{_3}{^-}$와 $I{_5}{^-}$ 발색단에 해당하는 흡수밴드를 각각 나타냈다. PVA-KI계 필름의 편광효율과 투과도는 산화시간, 연신비율, KI 농도 등에 크게 의존하였다. 제조된 편광필름은 99.5%와 45%의 높은 편광효율 및 투과도를 나타냈다. 특히 산화공정에 의해 제조된 편광필름의 열저항은 기존의 PVA-$I_2$계 편광필름에 비하여 뛰어났다. 이러한 결과는 PVA 편광필름의 산화공정의 차이에 기인된다고 생각된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1539-1542
• /
• 2007

We have synthesized novel organic passivation materials to protect organic thin film transistors (OTFTs) from $H_2O$ and $O_2$ using polyvinyl alcohol (PVA)/layered silicate (SWN) nano composite system. Up to 3 wt% of layered silicate to PVA, very homogeneous nanocomposite solution was prepared.

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.19-25
• /
• 2004

Both poly(vinyl alcohol)$(PVA)-I_2$ and PVA-dye polarizing film were prepared using PVA with number-average degree of polymerization of 1,700, 2,300, 2,600. The optical property of used dye in this study closed to the that of iodine. The PVA-dye polarizing film was prepared through the dyeing process. In comparison of the result of the measurement of the heat and humidity resistance of two types polarizing films, it of PVA-dye polarizing film was higher than that of a conventional $PVA-I_2$polarizing film. The transmittance and the polarization efficiency of PVA-dye polarizing film was significantly influenced by dye concentration, dipping time, salt concentration, and temperature of dye bath. The PVA-dye polarizing film exhibited a high polarization efficiency of 99.3% and a good transmittance of 42.4%.

• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.147-152
• /
• 2021

Bulk polymerization was used to produce poly(vinyl acetate) with different molecular weights, which were then saponified to prepare poly(vinyl alcohol) (PVA) with different molecular weights. With P_n of 2,060 and 3,240, the optimum film formation concentrations of PVA were found 7.5wt.% and 6.5wt.%, respectively. The drawing characteristics of the PVA film prepared at the optimum film formation concentrations were experimented, as well as the thermal characteristics of the PVA film based on the drawing ratio were observed. When the drawing velocity was fixed, it was found that the drawing ratios of all samples decreased as the heat band gap increased, and the melting temperature of the PVA film slightly increased as the drawing ratio increased regardless of the P_n of PVA.

• 폴리머
• /
• 제24권5호
• /
• pp.713-720
• /
• 2000

수평균 중합도 900 및 교대배열기 함량 63.1%의 교대배열 poly(vinyl alcohol) (s-PVA)을 사용하여 s-PVA/요오드계 편광필름을 제조하였다. 흔성배열 PVA/요오드계 필름과 비교할 때 편광도는 자연신비에서도 99% 이상의 값을 가짐으로써 향상된 결과를 보였으나 투과도는 약간 저하되는 경향을 보였다. 따라서 침지액의 요오드 농도를 보다 낮추고 4배의 연신비를 유지함으로써 우수한 투과도와 편광도를 가지는 필름을 제조할 수 있었다. 한편, s-PVA/요오드 필름의 열수하에서의 탈착은 현저히 억제되었다. 결정화도, (100)면의 결정크기 및 면간거리가 조금씩 감소하거나 더 이상 증가하지 않는 것으로부터 침지시간 초기에는 요오드가 주로 결정영역에서 복합체를 형성하고, 이후에는 주로 결정면 밖에서 복합체를 형성하거나 단순한 물리적인 흡착을 이루고 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.991-996
• /
• 1999

Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.