• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.387-390
• /
• 2004

Thick film alcohol gas sensors were fabricated. Their electrical properties and gas sensing characteristics were investigated. The sensitivity of $1wt.\%$ Pd-doped ${\gamma}-Fe_2O_3$ thick film heat treated at $400^{\circ}C$, 2hrs was $74\%$ to 500ppm alcohol gas at the operating temperature of $250^{\circ}C$. The selectivity of the film to alcohol was good. It showed fast response time to low concentrations of alcohol in air, hence this sensor can be used as a breath sensor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.783-788
• /
• 2008

We suggest a CNT-based gas sensor for breath alcohol measurement. The sensor was composed of single-walled carbon nanotubes (SWCNTs) thin film on flexible PES (polyethersulfone) substrate, and the SWCNTs thin film was formed by multiple spray-coating with SWCNTs solution which was well-dispersed, highly controlled and functionalized in ethanol solvent. In this work, three types of SWCNTs thin films were deposited with changes in the number of spray-coatings to 20, 40 and 60 times in order to compare electrical response properties of the SWCNTs thin films. from the fabricated sensors, conductance and capacitance responses were measured and discussed. Alcohol gas sensors have been commercialized widely as gauge for breath alcohol measurement which is applicable to checking whether car drivers are drinking-driving or not. Our alcohol gas sensors showed good sensitivity and linearity even at room temperature.

• The Journal of Information Technology
• /
• v.8 no.1
• /
• pp.57-61
• /
• 2005

In this study, polyvinyl alcohol film of japan and china products were measured by FT-IR spectrophotometer, ASTM D882-02(tensile strength) and KS M3048-2001 test method(Thermal Gravitational Analysis). The Chinese product became help in prime cost curtailment. It was confirmed as the result polyvinyl alcohol film which analyzes the Chinese product and the Japanese product. And the result stability which tries to measure the stability against heat was superior.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.14-21
• /
• 2004

In this research, we accomplished in order to improving color fastness of sublimation for Poly (vinyl alcohol) (PVA)-iodine polarized film. The poor iodine sublimation problem has greatly improved by $O_2$ low temperature plasma treatment. We obtained the followings: (1) plasma treatment has contributed in adhesive ability via peel strength, AFM image and roughness were investigated, But the improvement in adhesive strength was not linearly proportional to the treatment time. (2) $O_2$ plasma treated PVA-iodine polarized film was good enough as to maintain the transmittance and polarization even after iodine cone. of 0.05mol/L and dipping time of 50sec. (3) $O_2$ low temperature plasma treated PVA-iodine polarized film has obtain high durability because of good adhesive strength.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.603-607
• /
• 1999

The polarization characteristics of poly(vinyl alcohol)-iodine complex, (PVA-KI system) prepared by the oxidation process of PVA film containing a potassium iodide (KI) were investigated. The UV-visible spectrum of the PVA-KI system polarizing film showed avsorption bands corresponding to $I^{-}$, $I{_3}{^-}$ and $I{_5}{^-}$ chromophoric species at 220 nm, 290~360 nm, respectively. The polarization efficiency and transmittance of PVA-KI system film were significantly influenced by oxidation time, stretching ratio and concentration of KI. The prepared polarizing film exhibited a high polarization efficiency(99.5%) and transmittance(45%). Especially, the heat resistance of the polarizing film was higher than that of a commercial PVA-$I_2$ polarizing film. It may be argued that the result should come from a difference in oxidation process of PVA polarizing film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1539-1542
• /
• 2007

We have synthesized novel organic passivation materials to protect organic thin film transistors (OTFTs) from $H_2O$ and $O_2$ using polyvinyl alcohol (PVA)/layered silicate (SWN) nano composite system. Up to 3 wt% of layered silicate to PVA, very homogeneous nanocomposite solution was prepared.

• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.19-25
• /
• 2004

Both poly(vinyl alcohol)$(PVA)-I_2$ and PVA-dye polarizing film were prepared using PVA with number-average degree of polymerization of 1,700, 2,300, 2,600. The optical property of used dye in this study closed to the that of iodine. The PVA-dye polarizing film was prepared through the dyeing process. In comparison of the result of the measurement of the heat and humidity resistance of two types polarizing films, it of PVA-dye polarizing film was higher than that of a conventional $PVA-I_2$polarizing film. The transmittance and the polarization efficiency of PVA-dye polarizing film was significantly influenced by dye concentration, dipping time, salt concentration, and temperature of dye bath. The PVA-dye polarizing film exhibited a high polarization efficiency of 99.3% and a good transmittance of 42.4%.

• Textile Coloration and Finishing
• /
• v.33 no.3
• /
• pp.147-152
• /
• 2021

Bulk polymerization was used to produce poly(vinyl acetate) with different molecular weights, which were then saponified to prepare poly(vinyl alcohol) (PVA) with different molecular weights. With P_n of 2,060 and 3,240, the optimum film formation concentrations of PVA were found 7.5wt.% and 6.5wt.%, respectively. The drawing characteristics of the PVA film prepared at the optimum film formation concentrations were experimented, as well as the thermal characteristics of the PVA film based on the drawing ratio were observed. When the drawing velocity was fixed, it was found that the drawing ratios of all samples decreased as the heat band gap increased, and the melting temperature of the PVA film slightly increased as the drawing ratio increased regardless of the P_n of PVA.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.713-720
• /
• 2000

A polymer/iodine complex film was prepared using syndiotactic poly(vinyl alcohol) (s-PVA) with number-average degree of polymerization of 900 and syndiotactic diad content of 63.1%. In comparison with atactic-PVA/iodine films, degree of polarization of the s-PVA/iodine film was improved up to over 99% although a lower transmittance was obtained. By soaking in iodine/potassium iodide aqueous solution of a lower iodine concentration and subsequent drawing by 4 times, s-PVA/iodine film of a higher transmittance and degree of polarization was produced. The degree of iodine desorption of the s-PVA/iodine film in water were very low. The crystallinity and the d-spacing and crystal size of (100) plane increased at the early stage of soaking time, however, remained constant or decreased slightly with increasing soaking time. In consequence, s-PVA/iodine complex formation took place mainly inside crystal region at the initial stage of soaking time, whereas it occurred outside crystal region or physical adsorption of iodine dominated after sufficient soaking.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.991-996
• /
• 1999

Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.