• Transactions on Electrical and Electronic Materials
• /
• 제11권2호
• /
• pp.49-53
• /
• 2010

Microstructural origins of leakage current and physical degradation during operation in product-quality AlGaN/GaN high electron mobility transistor (HEMT) devices were investigated using photon emission microscopy (PEM) and transmission electron microscopy (TEM). AlGaN/GaN HEMTs were fabricated with metal organic chemical vapor deposition on semi-insulating SiC substrates. Photon emission irregularity, which is indicative of gate leakage current, was measured by PEM. Site specific TEM analysis assisted by a focused ion beam revealed the presence of threading dislocations in the channel below the gate at the position showing strong photon emissions. Observation of electrically degraded devices after life tests revealed crack/pit shaped defects next to the drain in the top AlGaN layer. The morphology of the defects was three-dimensionally investigated via electron tomography.

• 전자공학회논문지A
• /
• 제31A권9호
• /
• pp.114-120
• /
• 1994

We have been successfully fabricated the low nois HEMT device with AlGaAs and GaAs structure. The epitazial layer with n-type AlgaAs and undoped GaAs was grown by molecular beam epitaxy(MBE) system. Ohmic resistivity of the ource and drain contact is below 5${\times}10^{6}{\Omega}{\cdot}cm^{2}$ by the rapid thermal annealing (RTA) process. The ideality factor of the Schottky gate is below 1.6 and the gate material was Ti/Pt/Au. The HEMTs with 0.25$\mu$m-long and 200$\mu$m-wide gates have exhibited a noise figure of 0.65dB with associated gain of 9dB at 12GHz, and a transconductance of 208mS/mm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.143-143
• /
• 2009

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제36회 동계학술대회 초록집
• /
• pp.77-77
• /
• 2009

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제33회 하계학술대회 초록집
• /
• pp.315-315
• /
• 2007

• Transactions on Electrical and Electronic Materials
• /
• 제18권3호
• /
• pp.125-128
• /
• 2017

This study is on how ohmic area etching affects the buffer breakdown voltage of AlGaN/GaN HEMT. The surface morphology of the ohmic metal can be improved by whole etching on the ohmic area. The buffer breakdown voltages of the samples with whole etching on the ohmic area were improved by the suppression of the metal spikes formed under the ohmic contact regions during high-temperature annealing. The samples with selective etching on the ohmic area were investigated for comparison. In addition, the buffer leakage currents were measured on the different radii of the wafer, and the uniformity of the buffer leakage currents on the wafer were investigated by PL mapping measurement.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1157-1162
• /
• 2013

We proposed AlGaN/GaN high-electron-mobility transistors (HEMTs) using thermal oxidation for NiOx passivation. Auger electron spectroscopy, secondary ion mass spectroscopy, and pulsed I-V were used to study oxidation features. The oxidation process diffused Ni and O into the AlGaN barrier and formed NiOx on the surface. The breakdown voltage of the proposed device was 1520 V while that of the conventional device was 300 V. The gate leakage current of the proposed device was 3.5 ${\mu}A/mm$ and that of the conventional device was 1116.7 ${\mu}A/mm$. The conventional device exhibited similar current in the gate-and-drain-pulsed I-V and its drain-pulsed counterpart. The gate-and-drain-pulsed current of the proposed device was about 56 % of the drain-pulsed current. This indicated that the oxidation process may form deep states having a low emission current, which then suppresses the leakage current. Our results suggest that the proposed process is suitable for achieving high breakdown voltages in the GaN-based devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.420-420
• /
• 2013

We investigated oxygen plasma effect on defect states near the interface of AlGaN/GaN High Electron Mobility Transistor (HEMT) structure grown on a silicon substrate. After the plasma treatment, electrical properties were evaluated using a frequency dependant Capacitance-Voltage (C-V) and a temperature dependant C-V measurements, and a deep level transient spectroscopy (DLTS) method to study the change of defect densities. In the depth profile resulted from the temperature dependant C-V, a sudden decrease in the carrier concentration for two-dimensional electron gas (2DEG) nearby 250 K was observed. In C-V measurement, the interface states were improved in case of the oxygen-plasma treated samples, whereas the interface was degraded in case of the nitrogen-plasma treated sample. In the DLTS measurement, it was observed the two kinds of defects well known in AlGaN/GaN structure grown on sapphire substrate, which have the activation energies of 0.15 eV, 0.25 eV below the conduction band. We speculate that this defect state in AlGaN/GaN on the silicon substrate is caused from the decrease in 2DEG's carrier concentrations. We compared the various DLTS signals with filling pulse times to identify the characteristics of the newly found defect. In the filling pulse time range under the 80 us, the activation energies changed as the potential barrier model. On the other hand, in the filling pulse time range above the 80 us, the activation energies changed as the extended potential model. Therefore, we suggest that the found defect in the AlGaN/GaN/Si structure could be the extended defect related with AlGa/N/GaN interface states.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.176-176
• /
• 2012

본 연구는 GaN 기반의 전자소자의 표면 패시베이션 방법으로 열산화 공정을 이용한 알루미늄산화막 패시베이션 공정에 대하여 연구하였다. 결정질의 알루미늄산화물은 경도가 크고 화학적으로 안정적이기 때문에 외부 오염에 대한 소자 표면을 효과적으로 보호할 수 있으며, 열적안정성이 뛰어나 공정중 또는 공정 후의 고온 환경에서의 열 손상이 적은 장점을 가진다. 결정질 알루미늄산화막($Al_2O_3$)을 소자 표면에 형성하기 위해서 일반적으로 TMA (trimethlyaluminium)와 오존($O_3$)가스를 이용한 ALD 공정법이 사용되고 있으나 공정 비용이 비싸고 열산화막에 비해 전자 trapping이 많이 발생하여 전자이동도가 저하되는 단점이 있어, 본 연구에서는 열산화 공정을 이용하여 소자의 전기적 특성 저하를 발생시키지 않는 알루미늄산화막 패시베이션을 수행하였다. 실험에 사용된 기판은 AlGaN/GaN 이종접합 구조가 증착된 HEMT 제작용 기판을 사용하였으며 TLM 구조를 제작하여 소자의 채널 면저항 및 절연영역간 누설전류 특성을 확인하였다. TLM 구조가 제작된 샘플 위에 알루미늄을 100 ${\AA}$ 두께로 소자위에 증착하고 $O_2$ 분위기에서 약 $525{\sim}675^{\circ}C$ 온도로 3분간 열처리하여 알루미늄 산화막을 형성한 후 $950^{\circ}C$ 온도로 $N_2$ 분위기에서 30초간 안정화열처리 하여 안정한 알루미늄 산화막 패시베이션을 형성하였다. 알루미늄산화막 패시베이션 후 소자의 절연영역 사이의 누설전류는 패시베이션 전과 비슷한 크기를 나타냈고 패시베이션 후 채널의 면저항이 패시베이션 전에 비해 약 20% 감소한 것을 확인하였다. 또한 패시베이션된 소자와 패시베이션되지않은 소자에 대해 $900^{\circ}C$ 온도로 30초간 열처리한 결과 패시베이션 되지 않은 소자는 74%만큼 채널 면저항이 증가하였으며, 절연영역 누설전류가 다섯오더 크기로 증가한 반면 알루미늄산화막 패시베이션한 소자는 단지 13%의 채널 면저항의 증가를 나타내었고 절연영역 누설전류는 100배 감소한 값을 보여 알루미늄산화막 패시베이션이 소자의 열적 안정성을 향상시키는 것을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제33회 하계학술대회 초록집
• /
• pp.314-314
• /
• 2007