• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.433-438
• /
• 2014

PURPOSE: The purpose of our study was to compare a 975-nm, 500-mW GaAlAs low-level laser therapy versus placebo low-level laser therapy with regard to the immediate changes on the myofascial trigger point of the dominant upper trapezius muscle in subjects with rounded shoulder posture. METHODS: Thirty-two male college students with rounded shoulder posture and shoulder pain consented to participate in the experiment. The subjects were randomly assigned to a 2-minute procedure with either an active GaAlAs low-level laser or a placebo GaAlAs low-level laser. The pressure-pain threshold and visual analog scale on tenderness at 3 kg were measured with an algometer before and after the laser treatments. RESULTS: The active GaAlAs low-level laser group showed significant changes in pressure-pain threshold and visual analog scale on tenderness at 3 kg (p<0.05). The placebo GaAlAs low-level laser group showed no significant changes in either pressure-pain threshold or visual analog scale on tenderness at 3 kg (p>0.05). CONCLUSION: An immediate effect was observed in pressure-pain threshold and visual analog scale on tenderness at 3 kg following a 2-minute application ($857.14J/cm^2$) of a 975-nm, 500-mW GaAlAs low-level laser to the myofascial trigger point of the dominant upper trapezius muscle in patients with rounded shoulder posture.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.405-408
• /
• 1998

Due to the large conduction band discontinuity between emitter base, OmGaAs HBT has an advantge to enable the hot electrons to inject into the base. In this paper, InAlGaAs/InGaAs HBT with the various emitter junction gradings and the modified collectors are simulated and analyzed by HMC(hybrid monte carlo) simulator in order to find a optimal structure for the shortest transit time. A minium base transit time (.tau.$_{b}$ ) of 0.21 ps was obtained for HBT with the grading layer, which is parabolically graded from x=1.0 to x=0.5. The minimum collector transit time (.tau.$_{c}$ ) of 0.31ps was found when the collector was modified by inserting p$^{[-10]}$ and p$^{+}$ layers. Thus HBT in combination with the emitter grading and the modified collector layer showed the cut-off frequency (f$_{T}$) of 183GHz.z.z.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.258-264
• /
• 2004

In this paper, MMIC double balanced star mixer for 40 ㎓ was implemented on GaAs substrate with backside vias. In the design of the MMIC mixer, the design of balun and diode was required. A novel balun structure using microstrip to CPS was presented. The 40 ㎓ balun was designed based on the design experience of the scale-down balun by 2 ㎓. The balun may be suitable for fabrication in MMIC process with backside via and can easily be applied for DBM(Double Balanced Mixer). A Schottky diode was designed and implemented using p-HEMT process considering the compatability with other high frequency MMIC's fabricated on p-HEMT base process. Finally, the double balanced star mixer was fabricated using the balun and the p=HEMP Schottky diode. The measured performance of mixer shows 30 ㏈ conversion loss at 18 ㏈m LO power. This insufficient performance is caused by the unwanted diode at AlGaAs junction in vertical structure of p-HEMT. If the p-HEMT's gate is recessed to AlGaAs layer, and so the diode is eliminated, the mixer's performances will be improved.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.784-792
• /
• 2018

In this letter, a standard deviation based optimization technique has been applied on High Resolution X-ray Diffraction symmetric and asymmetric scan results to accurately determine the Aluminum molar fraction and lattice relaxation of Molecular Beam Epitaxy grown compositionally graded Aluminum Gallium Nitride (AlGaN)/Aluminum Nitride/Gallium Nitride (GaN) heterostructures. Mathews-Blakeslee critical thickness model has been applied in an alternative way to determine the partially relaxed AlGaN epilayer thicknesses. The coupling coefficient determination has been presented in a different perspective involving sample tilt method by off set between the asymmetric planes of GaN and AlGaN. Sample tilt is further increased to determine mosaic tilt ranging between $0.01^{\circ}$ and $0.1^{\circ}$.

• Advances in nano research
• /
• v.3 no.1
• /
• pp.13-27
• /
• 2015

Size dependent emission properties and the interband optical transition energies in group-III nitride based quantum dots are investigated taking into account the geometrical confinement. Exciton binding energy and the optical transition energy in $Ga_{0.9}In_{0.1}N$/GaN and $Al_{0.395}In_{0.605}N$/AlN quantum dots are studied. The largest intersubband transition energies of electron and heavy hole with the consideration of geometrical confinement are brought out. The interband optical transition energies in the quantum dots are studied. The exciton oscillator strength as a function of dot radius in the quantum dots is computed. The interband optical absorption coefficients in GaInN/GaN and AlInN/AlN quantum dots, for the constant radius, are investigated. The result shows that the largest intersubband energy of 41% (10%) enhancement has been observed when the size of the dot radius is reduced from $50{\AA}$ to $25{\AA}$ of $Ga_{0.9}In_{0.1}N$/GaN ($Al_{0.395}In_{0.605}N$/AlN) quantum dot.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.10-12
• /
• 1996

AlGaAs/GaAs Heterojunotion Bipolar Transistors (HBTs) with various emitter areas were fabricated and the device size dependence on the current gain was examined. With the different emitter areas, the passivated devices having the same peripheral length were fabricated and measured. The measured base current density in the Gummel plots shows an ideality factor of nearly 2. It is found that as the emitter area becomes small, the base current density with the ideality factor of 2 increases linearly, and as the emitter perimeter/area ratio becomes large, the surface recombination current density component increases. The current gain performance in AlGaAs/GaAs HBTs is mainly determined by either the larger emitter area or the smaller ratio of the emitter perimeter to the emitter area. These results will be compared with experimental works for GaInP/GaAs HBTs

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.194.2-194.2
• /
• 2015

본 논문에서는 InP 기판에 자발형성법 (Self-assembled Mode)으로 성장한 InAs/InAlGaAs 양자점(Quantum Dots)의 외부 열처리 온도에 따른 광학적 특성을 논의한다. 분자선증착기 (Molecular Beam Epitaxy, VH80MBE)로 5주기 적층구조를 갖는 InAs/InAlGaAs 양자점 시료 (기준시료)를 성장 후 온도 의존성 및 여기광세기 의존성 포토루미네슨스 (photoluminescence, PL) 분광법으로 기본특성을 평가하였다. 양자점 시료를 $500{\sim}800^{\circ}C$에서 열처리를 수행하고 광학적 특성을 열처리 전과 비교하여 분석하였다. $550^{\circ}C$에서 열처리한 InAs/InAlGaAs 양자점 시료의 저온 (11K) PL 파장은 1465 nm를 보였으며, 이는 열처리를 하지 않은 기준시료의 1452 nm 보다 13 nm 장파장으로 이동하였다. 열처리 온도가 $700^{\circ}C$ 이상인 경우, 양자점 PL 파장이 다시 단파장으로 이동하는 현상을 보였지만 여전히 열처리하지 않은 기준시료보다 장파장을 나타내었다. $700^{\circ}C$에서 열처리한 양자점 시료의 저온 PL 광세기는 기준시료보다 15.5배 더 크게 나타났으며, 주변 온도가 증가할수록 더디게 감소하는 것을 확인할 수 있었다. 온도의존성 PL로부터 구한 활성화에너지 (Activation Energy)는 $700^{\circ}C$ 열처리 온도의 경우 175.9 meV를 나타내었다. InAs/InAlGaAs 양자점 시료의 열처리 온도에 따른 광특성 변화를 InAs 양자점과 InAlGaAs 장벽층 계면에서 III족 원소인 In, Al 및 Ga의 상호확산과 결함이 완화되는 현상으로 해석할 수 있다.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.475-480
• /
• 2004

Self-assembled InAs quantum dots (QDs) embedded in an InAlGaAs matrix were grown on an InP (001) using a solid-source molecular beam epitaxy and investigated using transmission electron microscopy (TEM) and photoluminescence (PL) spectroscopy. TEM images indicated that the QD formation was strongly dependent on the growth behaviors of group III elements during the deposition of InAlGaAs barriers. We achieved a lasing operation of around 1.5 ${\mu}m$ at room temperature from uncoated QD lasers based on the InAlGaAs-InAlAs material system on the InP (001). The lasing wavelengths of the ridge-waveguide QD lasers were also dependent upon the cavity lengths due mainly to the gain required for the lasing operation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.2
• /
• pp.111-115
• /
• 2001

Metamorphic InAlAs/InGaAs HEMT are successfully demonstrated, exhibiting several advantages over conventional P-HEMT on GaAs and LM-HEMT on InP substrate. The strain-relaxed metamorphic structure is grown by MBE on the GaAs substrate with the inverse-step graded InAlAs metamorphic buffer. The device with 40% indium content shows the better characteristics than the device with 53% indium content. The fabricated metamorphic HEMT with $0.2\mu\textrm{m}$T-gate and 40% indium content shows the excellent DC and microwave characteristics of $V_{th}-0.65V,{\;}g_{m,max}=620{\;}mS/mm,{\;}f_T120GHZ{\;}and{\;}f_{max}=210GHZ$.

• ETRI Journal
• /
• v.18 no.4
• /
• pp.315-338
• /
• 1997

We extend our previous theoretical analysis of electronic and optical properties of p-type quantum well structures based on the two heavy- and light-hole system to include all the three valence bands. These theories are then used to clarify the origin of the normal incidence absorption and photo current at photon wavelengths of 2 - 3 ${\mu}m$, which was observed in addition to the absorption around 8 ${\mu}m$ by a recent experimental investigation with heavily doped p-type GaAs/AlGaAs multi-quantum well (MQW) structures. In the theoretical analysis, the Hartree and exchange-correlation many-body interactions are taken into account within one-particle local density approximation, and it is shown that normal incidence absorption occurs in two wavelength regions over the transition energy range higher than barrier height for p-type GaAs/AlGaAs superlattices with well doping of $2{\times}10^{19}\;cm^{-3}$; one region has broad absorption peaks with coefficients of about 5000 $cm^{-1}$ around 8 ${\mu}m$, and the other has two rather sharp peaks at 2.7 ${\mu}m$ and 3.4 ${\mu}m$ with 1800 $cm^{-1}$ and 1300 $cm^{-1}$, respectively. The result indicates that the theory explains the experimental observation well, as the theoretical and experimental results are in close agreement in general absorption features.