• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.308-314
• /
• 1999

We used the photoreflectance spectroscopy for characterization of the infrared photodetector structure we GaAs/$Al_{0.3}Ga_{0.7}As$ multi-quantum well (MQW) structures grown by molecular beam epitaxy (MBE) method. Energy gap related transitions in GaAS and AlGaAs were observed. The Al composition(x) was determined b Sek's composition formula. MQW related transition energies were identify the transitions, the experimentally observed energies were compare with results of the envelope function approximation for a rectangular quantum well.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.21-27
• /
• 2000

We used the surface photovoltage spectroscopy(SPVS) for characterization of GaAs/Al\ulcornerGa\ulcornerAs multi-quantum well(MQW) structures grown by molecular beam epitaxy(MBE) method. Energy gap related transitions in GaAs and AlGaAs were observed. The Al composition(x=0.3) was determined by Sek's composition formula. Transition energies in MQW were determined using the differential surface photo-volatage spectroscopy)DSPVS) of the measured resonanced. In order to indentify the transitions, the experimentally observed energies were compared with results of the envelope function approximation for a rectangular quantum well. We have observed and interesting behavior of the temperature dependence(80K~300K) of the 11Hand 11L transition for sample.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.10
• /
• pp.1202-1208
• /
• 1988

The electron density and electronic states in n- AlGaAs/GaAs heterointerface are calculated by using classical- and quantum-mechanics, respectively. We examine the effects of spacer layer thickness and doping concentration in AlGaAs layer on 2DEG density. Also, the dependences of electronic states of 2DEG upon temperature and acceptor concentration in GaAs layer are investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.220-220
• /
• 2010

펄스 직류 $BCl_3$ 플라즈마를 이용하여 GaAs와 AlGaAs의 건식식각을 연구하였다. 공정의 주요 변수는 펄스 직류 전압(350~550V), 펄스 직류 시간($0.4{\sim}1.2{\mu}sec$.), 펄스 직류 주파수(100~250kHz)이었다. 식각 실험 후 샘플의 식각률, 식각 선택도, 표면 형상을 비교, 분석하였다. 또한, 광학 발광 분석기(Optical Emission Spectroscopy)를 이용하여 식각하는 동안 플라즈마 방전 특성을 분석하였다. 표면 단차 측정기(Alpha-step IQ, Tencor)로 식각 깊이를 측정해 식각률을 계산하였다. 표면 거칠기 또한 단차 측정기의 표면 거칠기 프로그램을 이용하여 분석하였다. 식각 벽면과 표면 상태는 주사전자현미경(Field-emission scanning electron microscopy)을 이용하여 관찰하였다. 분석 결과는 1) 펄스 직류의 전압이 증가하면 전극에 걸리는 파워가 올라가고 GaAs와 AlGaAs의 식각률도 증가하였다. 2) 76 mTorr 공정 압력, $0.7{\mu}sec$. 펄스 직류 시간과 200 kHz 주파수 일 때 10 sccm $BCl_3$ 펄스 직류 플라즈마에서 GaAs와 AlGaAs 둘 다 약 $0.4{\mu}m/min$ 이상의 식각 속도를 보여주었다. 3) 식각 선택도는 펄스 직류의 전압이 높아지면 증가하였고, 펄스 직류 주파수의 증가도 공정 파워와 GaAs와 AlGaAs의 식각률을 증가시켰다. 4) 그러나 펄스 직류 주파수가 150kHz 이하일 때에는 GaAs와 AlGaAs가 거의 식각되지 않았다. 5) 표면 거칠기는 펄스 직류 주파수가 증가하면 미세하게 좋아졌고 플라즈마는 펄스 직류 주파수가 100~250kHz 일 때 생성되었다. 6) 펄스 직류 시간의 증가는 공정 파워, 식각률, 식각 선택도 모두의 증가를 가져왔다. 7) 광학발광분석기(OES) 데이타는 $BCl_3$ 플라즈마에서 넓은 범위(450~700nm)에서의 염소(Cl) 분자 피크를 나타내었다. 8) 전자 현미경 사진은 펄스 직류 전압이 400 V보다 550 V 일 때보다 더 이방성(Anisotropic)측면과 부드러운 표면을 나타냈지만, 조금의 홈(Trench)이 발견되었다. 결론적으로 펄스 직류 $BCl_3$ 플라즈마는 GaAs와 AlGaAs의 건식식각에서 우수한 결과를 나타냈었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.10-12
• /
• 1996

AlGaAs/GaAs Heterojunotion Bipolar Transistors (HBTs) with various emitter areas were fabricated and the device size dependence on the current gain was examined. With the different emitter areas, the passivated devices having the same peripheral length were fabricated and measured. The measured base current density in the Gummel plots shows an ideality factor of nearly 2. It is found that as the emitter area becomes small, the base current density with the ideality factor of 2 increases linearly, and as the emitter perimeter/area ratio becomes large, the surface recombination current density component increases. The current gain performance in AlGaAs/GaAs HBTs is mainly determined by either the larger emitter area or the smaller ratio of the emitter perimeter to the emitter area. These results will be compared with experimental works for GaInP/GaAs HBTs

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.30-39
• /
• 1991

The influence of physical parameters (Al mole fraction, thickness, doping concentration) in the window and emitter on the efficiency characteristics of heteroface p-$Al_{x}Ga_{1-x}As/p-GaAs/n-GaAs/n^{+}$-GaAs solar cell is investigated. The maximum efficiency theoretically calculated in this device is obtained when a thickness of the window is in a range of (400-1000))$\AA$and a thickness/doping concentration of the emitter is in a range of (0.5-0.8)$\mu$m/(1-7)${\times}10^{17}cm^{-3}$, respectively. Also is the efficiency improved according to the increase of Al mole fraction in the indirect gap window(0.41${\le}x{\le}1.0$). The optimum designed heteroface cell with an area of 0.165cm$^2$fabricated using MOCVD exhibits an active area conversion efficiency of 17%, having a short circuit current density of 21.2mA/cm\ulcorner an open circuit voltage of 0.94V, and a fill factor of 0.75 under ELH-100mW/cm$^2$illumination.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.157-161
• /
• 2006

InGaN layers on GaN templated sapphire (0001) substrates were grown by mixed-source hydride vapor phase epitaxy (HVPE) method. In order to get InGaN layers, Ga-mixed In metal and $NH_3$ gas were used as group III and group V source materials, respectively. The InGaN material was compounded from chemical reaction between $NH_3$ and indium-gallium chloride farmed by HCl flowed over metallic In mixed with Ga. The grown layers were confirmed to be InGaN ternary crystal alloys by X-ray photoelectron spectroscopy (XPS). In concentration of the InGaN layers grown by selective area growth (SAG) method was investigated by the photoluminescence (PL) and cathodoluminescence (CL) measurements. Indium concentration was estimated to be in the range 3 %. Moreover, as a new attempt in obtaining InAlGaN layers, the growth of the thick InAlGaN layers was performed by putting small amount of Ga and Al into the In source. We found the new results that the metallic In mixed with Ga (and Al) as a group III source material could be used in the growth process of the In(Al)GaN layers by the mixed-source HVPE method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.123-129
• /
• 2001

The optimal high temperature processing conditions for the formation of Ohmic contact of Ti/Al/Pt/Au multiple layers were established for the fabrication of n$^{+}$-GaN/AlGaN/GaN HFET device. Contact resistivity as low as 3.4x10$^{-6}$ ohm-$\textrm{cm}^2$ was achieved by the annealing of the sample at 100$0^{\circ}C$ for 10 sec. using the RTA (Rapid Thermal Annealing) system. The fabricated HFET (Heterostructure Field Effect Transistor) with a structure of n'-GaN/undoped AlGaN/undoped GaN exhibited a low knee voltage of 3.5 V and a maximum source-drain current density of 180 mA/mm at Vg=0V.V.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.204-206
• /
• 1990

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1066-1073
• /
• 1996