• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.201-203
• /
• 1991

T. Kanal et al, were studied the superconducting properties in Bi system by mechanical grinding, in which the authors found that the samples ground degraded from the superconducting phases to nonsuperconducting phases. To obtain more information of the practical application in Bi system with high-Tc phase in this paper, these samples mechanically ground and the high-Tc phase properties of grinding powder samples were investigated.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.3
• /
• pp.196-203
• /
• 2011

The main aim of this study is to establish methods of morphological preservation and elemental quantification for individual snow crystals. Individual snow crystals were collected at a height of 20 m above ground level. To stabilize and preserve the original morphologies of the snow crystals, cyanoacrylate, which has been used to fix liquid droplets, was applied (Kasahara et al., 2000). Several different kinds of snow crystals (dendrite, sectored plate, quasi-sectored plate, and hexagonal plate) were successively stabilized using this method. The stabilized snow crystals were pretreated with acetone, and then the elemental components contained in a whole snow crystal were quantified with the Particle Induced X-ray Emission (PIXE) analytical technique. The snow crystal residual composition determined in the present study was dominated by sulfur and mineral components, and the elemental mass showed an apparent crystal size dependence, where the elemental mass gradually decreased as the crystal size increased.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.198-203
• /
• 2016

Computer-Aided Engineering (CAE) durability analysis and experiments of an aluminum alloy brake pedal were carried out for the car lighter by die casting method. In the CAE analysis, KS standards and criteria of the Volvo Car Corporation were applied, and in the experiment, KS standards were applied. The CAE analysis results show that aluminum alloy brake pedals are stronger than the conventional steel brakes pedals because the yield strength of the aluminum alloy increased by almost 97% over that of steel. Further, the structures of the cylinder and the frame were reinforced with increasing thickness of flame and were changed to suit the die-casting process. Through a durability test based on the KS standard, the strength of a prototype of the aluminum alloy brake pedal was confirmed to be sufficient.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.49.3-50
• /
• 2017

Metallicity is one of the most important properties in understanding galaxy evolution. However, measuring metallicity is limited to low redshift (z<3.5) due to the faintness of the metallicity indicators in normal galaxies. For high redshift universe, active galactic nuclei (AGN) can be used to constrain the host galaxy metallicity. Previous studies investigated AGN metallicity using emission line flux ratios (i.e., NV/CIV and FeII/MgII), finding no evolution up to z~6. Those results might be due to selection effect since previous studies are based on very luminous AGNs. The observed luminosity-metallicity relation of AGNs (e.g., Nagao et al. 2006) suggests that luminous AGNs may be already matured at the observed epoch. Considering the luminosity-metallicty relation, we focused on low luminosity AGNs to find young AGNs (i.e., low metallicity). Through the Gemini/GNIRS observation in 2012A and 2015A (K-GMT GN-2015A-Q-203 PI: Shin, J.), we obtained the Gemini/GNIRS data for 7 high redshift AGNs (3.0

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.203-206
• /
• 1987

$Ga_{1-x}Al_xAs$ solar cells have been fabricated by LPE and characterized as a function of operating temperature from $25^{\circ}C$ to $l30^{\circ}C$. Open circuit voltage decreases linearly with increasing temperature by $1.4mv/^{\circ}C$, while degradation of silicon solar cells is about $2.2-2.5\;mv/^{\circ}C$. Experimental results regarding to GaAS solar cells, such as saturation current, ideality factors and fill factors are characterized as a function of operating temperature.

• Publications of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.139-146
• /
• 1996

Galactic open clusters NGC 1907 and NGC 1912 are known as a binary cluster candidate by Subramaniam et al.(1995). With the SNUO 0.6m telescope, UBV CCD photometric observations were performed for 62 stars in NGC 1907 within the area of $8'{\times}8'$ and 203 stars in NGC 1912 within the area of $15'{\times}15'$ area. We obtained C-M and C-C diagrams. Their mean reddenings are E(B-V) = $0.50{\pm}0.03$ for NGC 1907 and $0.27{\pm}0.03$ for NGC 1912. The distance moduli are estimated as $10.9{\pm}0.15$ and $10.4{\pm}0.10$ for NGC 1907 and NGC 1912, respectively. The ages for these clusters are $400{\pm}50Myr$ for NGC 1907 and $150{\pm}30Myr$ for NGC 1912. The distance difference of the two clusters is 300pc and the age difference is 150Myr. These results imply that the two clusters are not physically connected.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.11a
• /
• pp.195-203
• /
• 1995

본 연구는 강도와 인성이 우수한 7175Al 단조재의 국산화 개발을 위하여 기존 7XXX합금의 제조공정(일반공정)을 적용한 7075-T6/T73, 7050-774 및 7175-T74 단조재와 중간열처리, 용체화처리 등을 고온처리하는 특수제조 공정을 적용한 7175-T74 단조재의 강도, 파괴인성($K_IC$) 및 피로특성을 비교 평가하였다. 특수공정을 적용한 7175S-T74 단조재는 일반공정의 7075-T73, 7050-T74 및 7175-T74재보다 강도, 파괴 인성 및 피로특성이 향상되었다. 이것은 주조시 응고과정에서 형성되는 2차상입자의 감소와 특수공정의 적용효과에 기인하는 것으로 판단된다.

• Computers and Concrete
• /
• v.2 no.3
• /
• pp.203-214
• /
• 2005

In the Part 1 paper (Gawin, et al. 2005) some experimental results concerning micro-structural tests, permeability measurements and stress-strain tests of four types of High Performance Concrete, exposed to elevated temperatures (up to $700^{\circ}C$) are presented and discussed. On the basis of these experimental results parameters of the constitutive relationships describing influence of damage and temperature upon material intrinsic permeability at high temperature were determined. In this paper the effects of various formulations of damage-permeability coupling on results of computer simulations are analysed and compared with the results obtained by means of the previously proposed approach, that does not take into account the thermo-chemical concrete damage directly. Numerical solutions are obtained using the recently developed fully coupled model of hygro-thermal and damage phenomena in concrete at elevated temperatures. High temperature effects are considered by means of temperature and pressure dependence of several material parameters. Based on the mathematical model, the computer code HITECOSP was developed. Material parameters of the model were measured by several European laboratories, which participated in the "HITECO" research project. A model problem, concerning hygro-thermal behaviour and degradation of a HPC structure during fire, is solved. The influence of two different constitutive descriptions of the concrete permeability changes at high temperature, including thermo-chemical and mechanical damage effects, upon the results of computer simulations is analysed and discussed.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.203-207
• /
• 2009

We have investigated the effect of ambient gases on the structural, electrical, and optical characteristics of ITO thin films intended for use as anode contacts in OLED (organic light emitting diodes) devices. These ITO thin films are deposited by radio frequency (RF) magnetron sputtering under different ambient gases (Ar, Ar+$O_2$, and Ar+$H_2$) at $300{^{\circ}C}$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.5 sccm to 5 sccm and from 0.01 sccm to 0.25 sccm, respectively. The intensity of the (400) peak in the ITO thin films increased with increasing $O_2$, flow rate whilst the (400) peak was nearly invisible in an atmosphere of Ar+$H_2$. The electrical resistivity of the ITO thin films increased with increasing $O_2$ flow rate, whereas the electrical resistivity decreased sharply under an Ar+$H_2$ atmosphere and was nearly similar regardless of the $H_2$ flow rate. The change of electrical resistivity with changes in the ambient gas composition was mainly interpreted in terms of the charge carrier mobility rather than the charge carrier concentration. All the films showed an average transmittance of over 80% in the visible range. The OLED device was fabricated with different ITO substrates made with the configuration of ITO/$\alpha$-NPD/DPVB/$Alq_3$/LiF/Al in order to elucidate the performance of the ITO substrate. Current density and luminance of OLED devices with ITO thin films deposited in Ar+$H_2$ ambient gas is the highest among all the ITO thin films.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.203-207
• /
• 2013

Zeolites with different structures were synthesized from the hydrothermal synthesis condition employing simple structure directing agent (SDA) containing piperidine moiety. The gel containing $1.0SiO_2$:0.9SDA:$0.062NaAlO_2$:0.217NaOH:$20H_2O$ was subject to hydrothermal synthesis at 413~453 K for 7 days. FER type zeolite was obtained at 433 K when piperidine was employed as SDA, whereas TON and MFI type zeolites were also obtained at 433 K when 2,6-dimethylpiperidine and 2,2,6,6-tetramethylpiperidine were used, respectively. Further increase of hydrothermal synthesis temperature to 453 K resulted in the formation of TON type zeolite when 2-mtheylpiperidine was used. The structural analysis of powder X ray diffraction pattern over FER type zeolite suggested that the SDA, piperidine interacted intimately with the zeolite where it located close to the framework.