• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.144-145
• /
• 2006

In this study, the Al doped ZnO thin films were prepared by the facing targets sputtering(FTS) apparatus. The electrical characteristics, transmittance of ITO thin films were investigated as a function of varying input current and oxygen gas flow rate. As a result, the ITO thin film was prepared with a resistivity $6{\times}10-4[{\Omega}-cm]$ and transmittance 80% at visible range.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.36-43
• /
• 2000

In oder to enhance the selectivity of TMA(trimethylamine) gas, the ZnO-based films which were doped with $Al_2O_3$, $TiO_2, $In_2O_3$ and $V_2O_5$ catalysts with various weight percents were deposited in oxygen by RF magnetron sputtering method. To improve electrical stability of sensors, the ZnO-based films were annealed in oxygen at $700^{\circ}C$ for 1 hour. The TMA selectivity of sensors was defined by the magnitude($S_{TMA}/S_{DMA}$ and $S_{TMA}/S_{NH3}$) of TMA sensitivity relative to DMA and sensitivity ammonia($NH_3$) sensitivity, respectively. The $ZnO+Al_2O_3(4\;wt.%)+TiO_2(1\;wt.%)+In_2O_3(1\;wt.%)$ sensor showed high $S_{TMA}/S_{DMA}$ of 5.9 and $S_{TMA}/S_{NH3}$ of 26 to 160 ppm at the working temperature of $300^{\circ}C$ respectively.

• Korean Journal of Materials Research
• /
• v.16 no.6
• /
• pp.346-350
• /
• 2006

Al-doped ZnO (AZO) thin films were grown on type of glass#1737 substrates by DC magnetron sputtering. The structural, electrical and optical properties of the films were investigated as a function of various plasma discharge power. The obtained films were polycrystalline with a hexagonal wurtzite structure and preferentially oriented in the (002) crystallographic direction. The lowest resistivity was $6.0{\times}10^{-4}{\Omega}cm$ with the carrier concentration of $2.69{\times}10^{20}cm^{-3}$ and Hall mobility of 20.43 $cm^2/Vs$. The average transmittance in the visible range was above 90%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.426-426
• /
• 2008

ZnO 박막과 Al이 도핑된 ZnO 다결정질 박막을 rf magnetron sputtering 방법을 이용하여 Si(100) 기판과 코닝글라스 기판에 증착하여 박막의 광학적 특성을 Spectro-scopic Ellipsometry (SE, Woollam사)와 UV-VIR-NIR Sphectrophotometry (SP, Varian사)를 사용하여 분석하였다. SE 측정은 입사각도 55도에서 75도까지 5도 간격으로 파장범위 250 - 1700 nm 에서 3 nm 간격으로 측정하였으며, SP 측정은 수직입사로 250-3000 nm 파장범위에서 1 nm 간격으로 투과도와 반사도를 측정하였다. 측정된 데이터들은 Lorentz Oscillator 모델과 Drude free electron 모델이 결합된 분산관계식을 사용하여 전산 맞춤을 하여 분석하였다. ZnO 박막의 optical band gap energy 는 3.3 eV로 측정되었으며, Al 도핑에 따른 자유전하농도가 증가에 의하여 Burstein-Moss 효과에 따르는 optical band gap energy의 증가 거동을 보였다. 또한 자유전하농도 증가에 따라 band edge 부근에서 나타나는 excitonic transition 에 기인하는 유전함수 피크의 broadening이 관찰되었으며, high frequency dielectric constant는 자유 전하농도에 관계없이 3.689${\pm}$0.05 eV 의 값을 가졌다. Drude free electron 모델을 사용하여 plasma frequency를 구하고 이로부터 얻어진 optical mobility 와 Hall mobility를 비교하여 ZnO계 다결정질 박막에서의 결정립계가 이동도에 미치는 영향을 고찰하고자 한다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.05a
• /
• pp.39-39
• /
• 1996

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.629-635
• /
• 2010

Abstract In this study characteristics of Al-doped ZnO thin film by HIPIMS (High power impulse sputtering) are discussed. Deposition speed of HIPIMS with conventional balanced magnetic field is measured at about 3 nm/min, which is 30% of that of conventional RF sputtering process with the same working pressure. To generate additional magnetic flux and increase sputtering speed, electromagnetic coil is mounted at the back side of target. Under unbalanced magnetic flux from electromagnet with 1.5A coil current, deposition speed of AZO thin film is increased from 3 nm/min to 4.4 nm/min. This new value originates from the decline of particles near target surface due to the local magnetic flux going toward substrate from electromagnet. AZO film sputtered by HIPIMS process shows very smooth and dense film surface for which surface roughness is measured from 0.4 nm to 1 nm. There are no voids or defects in morphology of AZO films with varying of magnetic field. When coil current is increased from 0A to 1A, transmittance of AZO thin film decreases from 80% to 77%. Specific resistance is measured at about $2.9{\times}10-2\Omega{\cdot}cm$. AZO film shows C-axis oriented structure and its grain size is calculated at about 5.3 nm, which is lower than grain size in conventional sputtering.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.587-591
• /
• 1998

AZO transparent conducting thin film were fabricated by DC magnetron sputtering using the Zn: Al (2% aluminu contained ) alloy target with inducing microwave to the plasma, and the effect of microwave was studied. The optical transmittance, the resistivity and dynamic deposition rate at the applied voltage to target of 420 V was 50~70%, $ 5.5{\times}10^{-3}{\Omega}$cm and 6,000 $\AA\textrm{mm}^2$/J, respectively. After annealing AZO coated glass at $400^{\circ}C$ for 30 minutes, the light transmittance was increased to 80% and electrical conductivity was also increased two times, reached to resistivity of $2.0{\times}10^{-3}{\Omega}$cm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.175-175
• /
• 2010

Transparent conducting oxide (TCO) films are widely used as transparent conducting thin film material for application in various fields such as solar cells, optoelectronic devices, heat mirrors and gas sensors, etc. Recently the increased utilization of many transparent electrodes has accelerated the development of inexpensive TCO materials. Indium tin oxide (ITO) film is well-known for TCO materials because of its low resistivity, but there is disadvantage that it is too expensive. ZnO film is cheaper than ITO but it shows thermally poor stability. On the contrary, antimony-doped tin oxide films (ATO) are more stable than TCO films such as Al-doped zinc oxide (AZO) and ITO. Moreover, SnO2 film shows the best thermal and chemical stability, low cost and mechanical durability except the poor conductivity. However, annealing is proved to improve the conductivity of ATO film. Therefore, in this work, antimony (6 wt%) doped tin oxide films to improve the conductivity were deposited on 7059 corning glass by RF magnetron sputtering method for the application to transparent electrodes. In general, of all TCO films, glass is the most commonly selected substrate. However, for future development in flexible devices, glass is limited by its intrinsic inflexibility. In this study, we report the growth and properties of antimony doped tin oxide (ATO) films deposited on PES flexible substrate by using RF magnetron sputtering. The optimization process was performed varying the sputtering parameters, such as RF power and working pressure, and parameter effect on the structural, electrical and optical properties of the ATO films were investigated.

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.101-105
• /
• 2015

ZnO is gathering great interest for large square optoelectrical devices of flat panel display (FHD) and solar cell as a transparent conductive oxide (TCO). Herewith, Mg and IIIA (Al, In) co-doped ZnO films were prepared on SLG substrate using RF magnetron sputtering system. The effect of variation of atomic weight % of Mg and ZnO have been investigated. The atomic weight % Al and In are of 3% and kept constant throughout. The numbers of samples were prepared according to their different contents, which are $M_{3%}AZO_{94%}$, $M_{4%}AZO_{93%}-(MAZO)$ and $M_{3%}IZO_{94%}$, $M_{4%}IZO_{93%}-(MIZO)$ respectively. A RF power of 225 W and working pressure of 6 m Torr was used for the deposition at $300^{\circ}C$. All of the two thin film show good uniformity in field emission scanning electron microscopy image. $M_{3%}AZO_{94%}$ thin film shows overall better performance among the all. The film shows the best lowest resistivity, carrier concentration, mobility and Sheet resistance and is found to be are of $8.16{\times}10^{-4}{\Omega}cm$, $4.372{\times}10^{20}/cm^3$, $17.5cm^2/vs$ and $8.9{\Omega}/sq$ respectively. Also $M_{3%}AZO_{94%}$ thin film shows the relatively high optical band gap energy of 3.7 eV with high transmittance more than 80% in visible region required for the better solar cell performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.93-94
• /
• 2008

양이온 금속원소(Al)와 음이온 할로겐 원소(F) 및 수소를 다중 도핑한 ZnO 박막을 rf 마그네트론 스퍼터를 이용하여 코닝 글라스에 증착하여 도핑량과 진공중에서의 열처리에 따른 전기적 및 광학적 특성에 대하여 고찰하였다. 양이온이 할로겐 및 수소와 동시에 도핑될 시, 금속이온의 농도가 낮은 것이 TCO 박막의 전기적 특성 향상에 유리하게 작용하는 것으로 나타났으며, 동일한 F 함량에 대하여는 수소가 증가할수록 박막의 전기적 특성이 향상되는 것으로 나타났다. 그러나 열처리에 따른 F와 H의 거동은 반대로 나타나서, 최적의 상대적인 도핑 조성이 있음을 시사하였고, 36.2 $cm^2$/Vs의 높은 흘 이동도와 $2.9\times10^{-4}{\Omega}cm$의 낮은 비저항을 가지는 ZnO계 박막의 제조가 가능하였다.