• Journal of the Korean institute of surface engineering
• /
• v.27 no.2
• /
• pp.99-108
• /
• 1994

Films of glass-ceramics $Li_2O-Al_2O_3-SiO_2$(LAS)system were prepared on substrate of an iron plate(SCP) by sol-gel technique using metal alkoxide such as Si$(OC_2H_5)_4$,Al$(OC_2H_9)_3$) and Ti$(OC_2H_6)_4$). Sol which was made by means of simple spray coating, on the substrate was hydrolyzed at 75~$80^{\circ}C$ in moisture cabinet (80~90 % humidity) to form the multicomponent gel. The films up to about 0.8~1.0$mu extrm{m}$ in thickness can be obtained by repeating operation, spraylongrightarrowhydrolysis and condensationlongrightarrowdryinglongrightarrowheating and crystallization at $700^{\circ}C$ for 3~5min. The far-infrared radiation spectra of the coated films on substrate were examined by FT-IR and of films was also observed by scanning electron micrograph technique. The thermal evaluation of the gel-film is followed by TG/DTA measurements. The structure evaluation is followedd X-ray diffraction. These results suggest that this process is applicable to far-infrared radiat at thin film technique.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2006

Treatment of PET fabrics with alkali, chitosan and Al-mordanting has been carried out and the role of the chitosan coating in the dyeing process was clarified. The pre-treatment was effectively evaluated differences in dyeing behavior between its treated and untreated PET fabrics using wood of Caesalpinia sappan. The pre-treated on PET fabrics has been examined by SEM and evidence for the presence of chitosan sought using a air permeability test. Similar colour fastness by computer color matching(CCM) obtained on both untreated and pre-treated PET fabrics. The pre-treated PET was found to be of a deeper hue to that of its dyed untreated PET and, despite of its better colour depth, the wash fastness of the pre-treated dyeing was comparable to that of its dyed untreated PR. The application of chitosan or mordanting reveled that pre-treatment imparted to the PET additional functional groups that were available for coordination with the Brazilin.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.40-40
• /
• 2018

강원도 혹한지역에 설치된 ACSR cable(Aluminium Conductor Steel Reinforced, 강심 알루미늄 연선)에 겔러핑(Galloping), 슬릿점핑(Sleet jumping) 등 빙설해로 인한 단전 및 단락 사고가 발생하여 전력망 운영에 심각한 문제를 초래하고 있다. 특히, 빙설해로 인한 정전사고는 전기 품질의 저하 뿐만 아니라, 국지적으로 발생하여 광범위하게 영향을 미치기 때문에 이에 대한 대응 및 예방기술이 요구되고 있다. 본 연구에서는 ACSR cable의 원 소재인 알루미늄 합금(Al 6061)을 대상으로 낮은 표면에너지를 갖는 결빙방지 코팅소재로 표면처리하여 결빙방지 성능을 향상하고자 하였다. 코팅소재와 얼음과의 접합특성은 결빙접합 특성 시험기를 사용하여 정량적으로 측정하였으며 시험기의 신뢰성 확보를 위해 FEM Modeling을 수행하였다. 결빙특성 지표인 ARF(Adhesion reduction factor)를 적용하여 소재별 결빙방지 효과를 비교 평가하였다. 코팅소재는 현재 해외 국내에서 상용화되고 있는 소수성, 초소수성 소재를 선정하였으며, 결빙접합강도와 매우 밀접하게 연관되어 있는 표면 에너지, 표면 거칠기와의 상관관계를 분석함으로써 결빙방지 코팅소재의 적합성을 평가하였다. 본 연구에서 개발한 상온 경화형 실리콘 러버 코팅소재는 원 소재 Al 대비 약 8~9배 낮은 탁월한 방빙성(Anti-icing) 효과를 나타내었으며, 내구성 또한 상용소재 대비 우수한 특성을 나타내었다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.2
• /
• pp.125-131
• /
• 1991

Electrolyte matrix fabrication process can be classifed as hot pressing, tape casting, callendering, electrophoretic deposition. however, these have limits in practice. Hot pressing is cumbersome method, because of careful heating and cooling. Furthermore, the perfected tile is so fragile that it is difficult to fit in a cell. Therefore this method is not adequate for mass production of the electrolyte matrix. Using electrophoretic deposition method, a very thin matrix can be made, but many attempts of the electrolyte embeding were found to be failure. Tape casting and callendering methods are employed in most of the matrix fabrication for the present. But these methods require lots of water as a solvent, so that coating of the LiAlO sub(2) with electrolyte is difficult. Recently, hot roll milling method has been developed and the perfected matrix was proved to be free from crack. The method, however, needs a roller to make a matrix and a perfected matrix is carefully striped off from the cooled roller. Therefore, this method requires a long time due to the cooling process. The author proposes a cold rolling process. On this method, heated slurry of the LiAlO sub(2) mixed with binder, is rolled with a cold roller. The heated slurry dose not adhere to the roller, since contacted hot slurry is rapidly solidified. Therefore fabrication speed is increased, without getting rid of merits of the hot rolling process.

• Archives of Pharmacal Research
• /
• v.18 no.3
• /
• pp.141-145
• /
• 1995

Omeprazole, a proton pump inhibitor, was given intravenously (iv), orally (po), intraperitoneally (ip), hepatoportalvenously (pv), and intrarectally (ir) to rats at a dose of 72mg/kg in order to investigate the bioavailability of the drug, The extent of bioavailabilities of omeprazole administered through pv, ip, po, and ir routes were 88.5, 79.4, 40,8, and 38.7%, respectively. Pharmacokinetic analysis in this study and literatures (Regardh et al., 1985 : Watanabe et al., 1994) implied significant dose-dependency in hepatic first-pass metabolism, clearance and distribution, and acidic degradation in gastric fluid. The high bioavailability from the pv administration (88.5%) means that only 11.5% of dose was extracted by the first-pass metabolism through the liver at this dose (72 mg/kg). The low bioavailability from the oral administration (40.8%) in spite of minor hepatic first-pass extraction indicates low transport of the drug from GI lumen to portal vein. From the literature (Pilbrant and Cederberg, 1985), acidic degradation in gastric fluid was considered to be the major cause of the low transport. Thus, enteric coating of oral preparations would enhance the oral bioavailability substantially. The bioavailability of the drug from the rectal route, in which acidic degradation and hepatic first-pass metabolism may not occur, was low (38.7%) but comparable to that from the oral route (40.8 %) indicating poor transport across the rectal membrane. In this case, addition of an appropriate absorption enhancer would improve the bioavailability. Rectal route seems to be an possible alternative to the conventional oral route for omeprazole administration.

• Journal of Magnetics
• /
• v.12 no.1
• /
• pp.21-26
• /
• 2007

Si-based electromagnetic noise suppressors on coplanar waveguide transmission lines incorporated with a $SiO_2$ dielectric layer and a nanogranular Co-Fe-Al-O magnetic thin film are reported. Unlike glass-based devices, large signal attenuation is observed even in the bare structure without coating the magnetic thin film. Much larger signal attenuation is achieved in fully integrated devices. The transmission scattering parameter ($S_{21}$) is as small as -90 dB at 20 GHz at the following device dimensions; the thicknesses of the $SiO_2$ and Co-Fe-Al-O thin films are 0.1 $\mu$m and 1 $\mu$m, respectively, the length of the transmission line is 15 mm, and the width of the magnetic thin film is 2000 $\mu$m. In all cases, the reflection scattering parameter ($S_{11}$) is below -10 dB over the whole frequency band. Additional distributed capacitance formed by the Cu transmission line/$SiO_2$/Si substrate is responsible for these characteristics. It is considered that the present noise suppressors based on the Si substrate are a first important step to the realization of MMIC noise suppressors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.157-157
• /
• 2015

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}g/m^2day$. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2day$) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study NBAS process was introduced to deposit enhanced film density single gas barrier layer with a low WVTR. Fig. 1. shows a schematic illustration of the NBAS apparatus. The NBAS process was used for the $Al_2O_3$ nano-crystal structure films deposition, as shown in Fig. 1. The NBAS system is based on the conventional RF magnetron sputtering and it has the electron cyclotron resonance (ECR) plasma source and metal reflector. $Ar^+$ ion in the ECR plasma can be accelerated into the plasma sheath between the plasma and metal reflector, which are then neutralized mainly by Auger neutralization. The neutral beam energy is controlled by the metal reflector bias. The controllable neutral beam energy can continuously change crystalline structures from an amorphous phase to nanocrystal phase of various grain sizes. The $Al_2O_3$ films can be high film density by controllable Auger neutral beam energy. we developed $Al_2O_3$ high dense barrier layer using NBAS process. We can verified that NBAS process effect can lead to formation of high density nano-crystal structure barrier layer. As a result, Fig. 2. shows that the NBAS processed $Al_2O_3$ high dense barrier layer shows excellent WVTR property as a under $2{\times}10^{-5}g/m^2day$ in the single barrier layer of 100nm thickness. Therefore, the NBAS processed $Al_2O_3$ high dense barrier layer is very suitable in the high efficiency OLED application.

• Corrosion Science and Technology
• /
• v.15 no.3
• /
• pp.120-124
• /
• 2016

The effect of alloying element Ca (0, 1, and 2 wt%) on corrosion resistance and bioactivity of the as-received and anodized surface of rolled plate AM60 alloys was investigated. A plasma electrolytic oxidation (PEO) was carried out to form anodic oxide film in $0.5mol\;dm^{-3}\;Na_3PO_4$ solution. The corrosion behavior was studied by polarization measurements while the in vitro bioactivity was tested by soaking the specimens in Simulated Body Fluid (1.5xSBF). Optical micrograph and elemental analysis of the substrate surfaces indicated that the number of intermetallic particles increased with Ca content in the alloys owing to the formation of a new phase $Al_2Ca$. The corrosion resistance of AM60 specimens improved only slightly by alloying with 2 wt% Ca which was attributed to the reticular distribution of $Al_2Ca$ phase existed in the alloy that might became barrier for corrosion propagation across grain boundaries. Corrosion resistance of the three alloys was significantly improved by coating the substrates with anodic oxide film formed by PEO. The film mainly composed of magnesium phosphate with thickness in the range $30-40{\mu}m$. The heat resistant phase of $Al_2Ca$ was believed to retard the plasma discharge during anodization and, hence, decreased the film thickness of Ca-containing alloys. The highest apatite forming ability in 1.5xSBF was observed for AM60-1Ca specimens (both substrate and anodized) that exhibited more degradation than the other two alloys as indicated by surface observation. The increase of surface roughness and the degree of supersaturation of 1.5xSBF due to dissolution of Mg ions from the substrate surface or the release of film compounds from the anodized surface are important factors to enhance deposition of Ca-P compound on the specimen surfaces.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.6
• /
• pp.264-270
• /
• 2017

In this study, while the abrasive plates for diamond have been prepared through mechanical alloying and sintering of elemental powders, a fabrication route of plasma thermal coatings has been adopted for the first time. When diamond knife is sharped or polished, a metal plate has been applied, which is made of mechanical alloying and sintering. In this study, in order to develop a cost - effective manufacturing process, plasma coatings of FeCrNi and Ti on cast iron plate were applied together with Al intermediate layer coatings. The plasma coatings were successfully performed, and the optimum coating layer conditions were discussed in terms of micro-structural observations at the interfaces.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.631-636
• /
• 2009

We investigated the NO gas sensing characteristics of ZnO-carbon nanotube (ZnO-CNT) layered composites fabricated by coaxial coating of single-walled CNTs with a thin layer of 1 wt% Al-doped ZnO using rf magnetron sputtering deposition. Morphological studies clearly revealed that the ZnO appeared to form beadshaped crystalline nanoparticles with an average diameter as small as 30 nm, attaching to the surface of the nanotubes. It was found that the NO gas sensing properties of the ZnO-CNT layered composites were dramatically improved over Al-doped ZnO thin films. It is reasoned from these observations that an increase in the surface-to-volume ratio associated with the numerous ZnO “nanobeads” on the surface of the CNTs results in the enhancement of the NO gas sensing properties. The ZnO-CNT layered composite sensors exhibited a maximum sensitivity of 13.7 to 2 ppm NO gas at a temperature of 200${^{\circ}C}$ and a low NO gas detection limit of 0.2 ppm in dry air.