• The Korean Journal of Quaternary Research
• /
• v.7 no.1
• /
• pp.69-91
• /
• 1993

A total of 76 surface sediment samples, collected from the Korean west coast and the eastern Yellow Sea areas, were analyzed for their elemental composition in order to understand the geochemical characteristics of these deposits. The analyzed elements included 9 major elements (Al, Fe, Na, K, Mg, Ca, Ti, P, Mn), 8 minor elements (Sr, Ba, V, Cr, Co, Ni, Cu, Zn), organic carbon and calcium carbonate. Contents of most analyzed elements, excluding K and Ba, were generally low compared to those of average crust. Contents of most elements, except K and Ca, also correlated with sediment grain size, though the degree of relationship varied widely from one element to another. For fine-grained sediments, a distinction could be made between those in the central Yellow Sea and those in the Keum Estuary based on their characteristic elemental composition: the former were rich in Fe, Na, K, Mg, Ca and V, and the latter in Mn, Co and Ni. The element/aluminium ratios, on the other hand, showed that the central Yellow Sea muds were enriched in Fe, Mg, V, Ni, Cu and Zn and depleted in K, Mn, Ba and Sr relative to the mud located near the Korean Peninsula. Based on the analysis of these results, as well as of the influences of particular mineral phases or pollution effects, we could suggest geochemical criteria which can be used in distinguishing muds from the two different sources, the Keum River and the Yellow River: the former by the higher Mn content and the latter by the higher Mg and V contents, relative to each other.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.3
• /
• pp.223-234
• /
• 2019

The geology of the Samdeok Mo deposit consists of Paleozoic Hwajeonri formation, Kowoonri formation, Suchangri formation, Iwonri formation, Hwanggangri formation, Cretaceous, leucocratic porphyritic granite and granitic porphyry. This deposit consists of three quartz veins that filled NS oriented fractured zones in Suchangri formation. Quartz veins vary from 0.05 m to 0.3 m in thickness and extend to about 400 m in strike length. Quartz veins occur as massive, breccia, and cavity textures. Wallrock alteration has silicification, sericitization, argillitization and chloritization. The mineralogy of the quartz veins consists of quartz, fluorite, white mica, biotite, apatite, monazite, rutile, ilmenite, molybdenite, chalcopyrite, Fe-Mg-Mn oxide and Fe oxide. White mica from Samdeok Mo deposit occurs as fine or coarse grains in quartz vein and hostrock and has four mineral assemblages (I type: quartz, molybdenite, Fe oxide and Fe-Mg-Mn oxide, II type: quartz, Fe oxide and Fe-Mg-Mn oxide, III type: quartz and biotite, and IV type: quartz). The structural formular of white mica from quartz vein is $(K_{0.89-0.60}Na_{0.05-0.00}Ca_{0.01-0.00}Sr_{0.02-0.00})_{0.94-0.62}(Al_{1.54-1.12}Mg_{0.36-0.18}Fe_{0.26-0.09}Mn_{0.04-0.00}Ti_{0.02-0.00}Cr_{0.02-0.00}Zn_{0.01-0.00})_{1.91-1.72}(Si_{3.40-3.11}Al_{0.92-0.60})_{4.00}O_{10}(OH_{1.68-1.42}F_{0.58-0.32})_{2.00}$, but white mica of I type has higher FeO content, and lower $SiO_2$ and MgO contents than white micas of other types. Also, compositional variations in white mica from the Samdeok Mo deposit are caused by phengitic or Tschermark substitution ($(Al^{3+})^{VI}+(Al^{3+})^{IV}{\leftrightarrow}(Fe^{2+}{\text{ or }}Mg^{2+})^{VI}+(Si^{4+})^{IV}$) and direct $(Fe^{3+})^{VI}{\leftrightarrow}(Al^{3+})^{VI}$ substitution.

• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.240-246
• /
• 2018

The present study analyzed standard samples of three types of aluminum matrix certified reference materials (CRM) using GD-MS. Calibration curves were constructed for 13 elements (Mg, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Sn, and Pb), with the slope representing the relative sensitivity factor (RSF). The x- and y-axes of the calibration curve represented ion beam ratio (IBR) and the authenticated value of the standard sample, respectively. In order to evaluate precision and linearity of the calibration curve, RSD and the coefficient of determination were calculated. Curve RSD for every element reflected high precision (within 10 %). For most elements, the coefficient of determination was ${\geq}0.99$, indicating excellent linearity. However, vanadium, nickel, and gallium curves exhibited relatively low linearity (0.90~0.95), likely due to their narrow concentration ranges. Standard RSF was calculated using the slope of the curve generated for three types of CRM. Despite vanadium, nickel, and gallium exhibiting low coefficients of determination, their standard RSF resembled that of the three types of CRM. Therefore, the RSF method may be used for element quantitation. Standard iron matrix samples were analyzed to verify the applicability of the aluminum matrix standard RSF, as well as to calculate the RSD-estimated error of the measured value relative to the actual standard value. Six elements (Al, Si, V, Cr, Mn, and Ni) exhibited an RSD of approximately 30 %, while the RSD of Cu was 77 %. In general, Cu isotopes are subject to interference: $^{63}Cu$ to $^{54}Fe^{2+}-^{36}Ar$ and $^{65}Cu$ to $^{56}Fe-Al^{3+}$ interference. Thus, the influence of these impurities may have contributed to the high RSD value observed for Cu. To reliably identify copper, the resolution should be set at ${\geq}8000$. However, high resolutions are inappropriate for analyzing trace elements, as it lowers ion permeability. In conclusion, quantitation of even relatively low amounts of six elements (Al, Si, V, Cr, Mn, and Ni) is possible using this method.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.6
• /
• pp.264-270
• /
• 2017

In this study, while the abrasive plates for diamond have been prepared through mechanical alloying and sintering of elemental powders, a fabrication route of plasma thermal coatings has been adopted for the first time. When diamond knife is sharped or polished, a metal plate has been applied, which is made of mechanical alloying and sintering. In this study, in order to develop a cost - effective manufacturing process, plasma coatings of FeCrNi and Ti on cast iron plate were applied together with Al intermediate layer coatings. The plasma coatings were successfully performed, and the optimum coating layer conditions were discussed in terms of micro-structural observations at the interfaces.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1782-1786
• /
• 2008

To investigate the characteristics of elemental components of atmospheric particles in Cheonan, atmospheric particles were sampled using a high volume air sampler equipped with a 5-stage cascade impactor during 2006. 16 elemental concentrations in fine and coarse particles were determined using ICP-AES and ICP-MS. The total mass concentrations of fine and coarse particles were 33.23 and $20.66{\mu}g/m3$, respectively, and the total elemental concentrations were 1.27, $1.71{\mu}g/m3$, occupying 3.8 and 8.3% of the total mass. Fe, Al, Ti were the most abundant elements in both fine and coarse particles, and the total Pb concentration was 84.55ng/m3, below the National standard. Enrichment factor for Sc, Cr, Cu, Zn, As, Se, Sn, Pb in fine particles were above 1,000. This indicates that the elements in fine particles are mainly from the anthropogenic sources including automobiles.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.213-232
• /
• 2021

Ore criteria at the Sheba Deposit indicate orogenic mineralization type. Rocks and mineral assemblages suggest low formation-temperature of green-schist facies. Pyrite found in two generations; Type1 is irregular grains, contains higher arsenic and gold contents, compared to the relatively younger phase Type2 pyrite, which is composed of euhedral grains, found adjacent to late quartz-carbonate veins or at rims of type1 pyrite. Two gold generations were identified; type1 found included in sulphides (mainly pyrite). The second gold type was remobilized (secondary) into free-lodes within silicates (mainly quartz). Gold fineness is high, as gold contains up to 95 wt. % Au, Ag up to 3.5 wt. %, and traces of Cu, Ni, and Fe. Pyrite type2 contains tiny mineral domains (rich in Al, Mn, Hg, Se, Ti, V, and Cr). Zoning, and replacement textures are common, suggesting multiple mineralization stages. The distribution and relationships of trace elements in pyrite type2 indicate three formation patterns: (1) Al, Mn, Hg, Se, Ti, V, Cr, and Sn are homogeneously distributed in pyrite, reflecting a synchronous formation. (2) As, Ni, Co, Zn, and Sb display heterogeneous distribution pattern in pyrite, which may indicate post-formation existence due to other activities. (3) Au and Ag show both distribution patterns within pyrite, suggesting that gold is found both in microscopic phases and as chemically bounded phase.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.3
• /
• pp.105-112
• /
• 2013

The microstructural changes of Fe-20Mn-12Cr-1Cu alloy have been studied during high temperature gas nitriding (HTGN) at the range of $1000^{\circ}C{\sim}1150^{\circ}C$ in an atmosphere of nitrogen gas. The mixed microstructure of austenite and ${\varepsilon}$-martensite of as-received alloy was changed to austenite single phase after HTGN treatment at the nitrogen-permeated surface layer, however the interior region that was not affected nitrogen permeation remained the structure of austenite and ${\varepsilon}$-martensite. With raising the HTGN treatment temperature, the concentration and permeation depth of nitrogen, which is known as the austenite stabilizing element, were increased. Accordingly, the depth of austenite single phase region was increased. The outmost surface of HTGN treated alloy at $1000^{\circ}C$ appeared Cr nitride. And this was in good agreement with the thermodynamically calculated phase diagram. The grain growth was delayed after HTGN treatment temperature ranges of $1000^{\circ}C{\sim}1100^{\circ}C$ due to the grain boundary precipitates. For the HTGN treatment temperature of $1150^{\circ}C$, the fine grain region was shown at the near surface due to the grain boundary precipitates, however, owing to the depletion of grain boundary precipitates, coarse grain was appeared at the depth far from the surface. This depletion may come from the strong affinity between nitrogen and substitutional element of Al and Ti leading the diffusion of these elements from interior to surface. Because of the nitrogen dissolution at the nitrogen-permeated surface layer by HTGN treatment, the surface hardness was increased above 150 Hv compared to the interior region that was consisted with the mixed microstructure of austenite and ${\varepsilon}$-martensite.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.3
• /
• pp.87-95
• /
• 2001

We've been investegated to find the optimum operation condition of electrlysis which have an influance on disposal efficiency of heavy metals. When we electrolyzed the testing wastewaters containing each 250mg/L of Cr and Zn ions, we exerimented with using variables like as pH, NaCl, electrode gap, electric current strength, the number of electrodes, after fastening positive electrode plate with Al, Fe, Ti and negative electrode plate with Stainless Steel Plate.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.132-132
• /
• 2001

옥천변성대의 충주-황강리 지역내 앰피볼라이트의 기원암은 염기성 화성암으로 쏠레이아이트 계열의 변이질암에 속한다. Fe $O^{*}$/MgO값의 변화에 대하여 분별작용에 의해 영향을 받는 주성분 원소와 미량원소들의 변화를 보게되면 Ti $O_2$, Fe $O^{*}$와 불호정성 원소(incompatible element)인 Zr, Nb, Hf, Ta, Th 등은 분별작용동안 증가하는 반면 호정성 원소(compatible element)인 MgO, $Al_2$ $O_3$, Ni, Cr 등은 감소하는 경향을 보여주고 있다. Fe $O^{*}$/MgO, Ti $O_2$ 그리고 Fe $O^{*}$는 심해성 쏠레이아이트 영역으로부터 분화된 경향을 나타내 주고 있다. Ni, Cr은 Fe $O^{*}$/MgO값의 증가에 따라 급속히 감소하며 안정한 대륙과 해저화산의 영역에 도시되고 있으며 칼크-알칼리(CA)와는 관계가 없고 쏠레이아이트의 영역에서 변화 패턴을 보여주어 앰피볼라이트가 활동적인 대륙연변부의 지구조 환경보다는 안정한 대륙이나 해저화산과 관계가 더 있음을 시사한다. 경휘토류 원소(LREE)는 중휘토류 원소(HREE)에 비해 더욱 부화된 특성을 띠고 원자번호가 증가하면서 표준화된 휘토류 원소패턴의 경사가 점차 감소하는 경향을 보여주고 있다. 대부분의 시료들은 큰 Eu이상치를 갖고 있지 않아 마그마 정출 과정동안 사장석의 분별작용이 거의 수반되지 않았음을 지시하고 전체적인 휘토류 원소의 패턴은 거의 평행하게 나타나므로 기원 마그마가 유사함을 의미하고 있다. 비유동성 원소를 이용한 여러 판별도표들을 통해서 본암은 대륙성 현무암질암으로서 판내부 환경에서 유래되었으며 대륙내부 열곡의 알칼리 현무암과 대륙성 현무암 영역에 속하는 것으로 보아서 대륙지각내 열곡작용과 같은 장력운동에 수반되어 생성된 것임을 시사해 주고 있다. 앰피볼라이트의 지각혼성화를 평가하기 위해 이에 필요한 몇 개의 지화학적 매개변수를 계산한 결과 La/Ta, La/Nb, Nb/Th들의 값이 오염 안된 마그마의 값을 지시해 주어 본암이 지각혼성화 작용을 받지 않은 것으로 나타났다. 대부분의 시료들은 P-타입 MORB의 영역에 속하며 소수의 시료가 T-타입 MORB의 영역에 도시되고 있어 본 앰피볼라이트의 생성에는 양적으로 다른 두 가지의 유사한 마그마가 수반된 것으로 추정된다. 것으로 추정된다.

• Ocean and Polar Research
• /
• v.25 no.1
• /
• pp.41-52
• /
• 2003

Sediment trap samples were collected to find out characteristic behaviors of metals in the settling particles by using time-series sediment traps at 678m and 1678m water depths in the Bransfield Strait from December 27th, 1999 to December 26th, 2000. Total mass fluxes at the intermediate water depth (678m water depth) were high in the austral summer and low in the austral winter, whereas at the deep water depth (1678m water depth) they showed high values in both the summer and winter. Total mass fluxes were generally higher in the deep water depth than in the intermediate water depth, which indicates that a substantial amount of sediments are laterally transported by strong currents into the deep basin from the shallow water depths. Aluminium contents also showed large seasonal variations with high values in the winter and low values in the summer. On the contrary, organic carbon contents were high in the summer and low in the winter. Al contents were negatively correlated with organic carbon contents, which may be ascribed that detrital particles are diluted by organic matter produced by phytoplankton in the surface waters. Metals measured in this study exhibited three characteristic behaviors; 1) a positive correlation with Al-Ti, Fe, Mn, V, Co, and Ba, 2) a negative correlation with Al-Cd and Zn, 3) no relationship with Al-Sr, Cu, Cr, Ni. Terrestrial materials may act as a major source fer metals that are positively correlated with Al, and organic matter may be a major source for metals that are negatively correlated with Al. Enrichment factor (EF) of Fe, Mn, Ba, Vi Co, Sr, Cr, and Ni ranged from 0.5 to 1.5, whereas EF of Zn, Cu, and Cd showed much higher values than 1.